Is this airbrush the most for the money? Reviewing the Mobius airbrush

In this video we review and test the Mobius 0.3mm airbrush to see of its not too cheap, not too expensive, but just right...is it the Goldie Locks of airbrushes?
www.gaahleri.c...

[@stephengrenot7039]

By far the best airbrush I've ever used.

[@spelledlikethegum]

Thanks so much for this review - I bought a Möbius 0.2mm based on your recommendation and am really impressed so far.

[@EngineeredAngler]

Great to hear!

[@stripermanly]

Always interesting seeing seeing different guns. Still have a Iwata $180 gun hooked up but haven’t used it yet. Why? I do all I need to to with my master airbrushes set up with a .5 and a .2 needle. More about the paint of choice than the gun. I’ve tried them all. Createx, wicked, golden high flow and several low ball paints. By far the golden is the best paint I’ve come across

[@EngineeredAngler]

Golden is the best!

[@stripermanly]

@@EngineeredAngler you got that right

[@kenmccarthyfishing]

Thank you and great review

[@EngineeredAngler]

Thanks for watching!

[@magcolor]

Good review, thank you very much!

[@EngineeredAngler]

My pleasure!

[@jvjoe4376]

Great content! Your demonstration was very educational and interesting. Thanks for posting.

[@EngineeredAngler]

Glad it was helpful!

[@jpdutoit4106]

Great review. Useful and thorough. Thank you for the content.

[@EngineeredAngler]

Thanks for watching!

[@user-vi9gw8pt9v]

Great content as always, really useful as I was thinking about buying an airbrush.

[@stonehorn4641]

I use an H&S Infinity. Expensive, but the best trigger Ive used by far. I originally bought it for warhammer, before I started making my own lures.

[@EngineeredAngler]

Thanks for sharing!

[@pontoontri-hull156]

I've always wanted to fly and ultralight. My physical condition will no longer allow for that dream. I did have the opportunity to parachute though, I'd imagine the experience would be similar to hang gliding.

[@shawnmoorshead9135]

Thanks for the reviews on air guns. I am searching to buy my first. I feel like in buying a fishing rod an air gun is similar in you need to feel it to see what is comfortable for you. Just my take. And again looking to buy my first air gun. Thank you for the insights in helping me.

[@EngineeredAngler]

Good luck...most inexpensive guns work fine so don't sweat it too much.

[@shawnmoorshead9135]

@@EngineeredAngler thank you very much appreciated.

[@bobrivett7645]

I think practicing with an air brush is one of most important things a person can do after purchasing an air brush, that becoming familiar with it through cleaning & practicing. My 1st air brush was a Badger model 200, a single action, siphon feed, I used only that brush for over 10 years before jumping to double action, which was a cheap one of off Amazon. I'm still better with my single action than any of the 5 or 6 doubles I have. But I still use them, it's just how much comfortable I am with that old badger. Anyway good luck with air brushing

[@StompingGroundLures]

I would like to see a video where you test different lip angles and how they effect the diving depth of a lure. great content as always. keep it up!

[@EngineeredAngler]

Great suggestion!

[@jurajanal2277]

Looks like a solid brush, I bet it will be nice for tiny details like spots on frogs or if you ever make something like a pike swimbait, and great review as always. Today I'd like to ask you if it's possible to dye the epoxy before pouring it into the mold. Let's say you want to make 10 all black jelly bean crankbaits. Would it be possible to just dye epoxy (with microballoons included) black and have them come out without needing base coat of paint?

[@EngineeredAngler]

yes, you can use resin dyes or easier yet Specialty Resins sells the same casting resin that cures black.

[@raygissendanner1476]

I my opinion a damn good lure designer and builder great information

[@EngineeredAngler]

Thanks so much

[@Cavanpikefishing]

Thanks for the video came at a good time I'm thinking of getting an air brush just have to find one in Ireland here or somewhere ✌️🎣

[@EngineeredAngler]

Glad I could help

[@axelcc2]

Hi there. I live in Dublin, and ordered mine directly from Gaahleri official website. You'll get it from a warehouse in Germany with DHL in about 1 week, and it's free delivery.

[@Straight0uttaCrofton]

maybe it's the baby bear of airbrushes

[@landwand]

According to the KZbinr, @theartworkshop, a lower airspeed is better for painting detail. And when getting close to the subject matter, I have to agree. Nothing is more annoying than paint splatter or spider-webbing, or even the mere sound of a strong air blast. Higher pressures = more paint thrown at the subject per PSI. This could be great for coverage, but more difficult to do fine detail painting. Great depth of review. I really did enjoy it!

[@azarelthecreator7098]

Surprisingly the iwata neo has the same airspeed as a custom micron.

[@sorenbuch]

Thank you for another great video! I was wondering, have you ever made or thought about making a lure testing tank with flow? "The Fly tester" is a product on the market but I don't think it will work for lures as it may be to small and the flow does not seem to be laminar. With your background I think you would be able to engineer a flow tank for lures with laminar flow :) It would be a great addition to the testing and tweaking of lures before taking them out to the water.

[@EngineeredAngler]

Yes I have drawn up plans and done the engineering but it is hard for me to commit the time and expense when I have a lake in my backyard. I'll make it one day.

[@marsbotbyl159]

I'll give you $50 for that masterpiece 😊

[@dennisgibsonii6316]

My brush has been clogging on createx metallic paints. It’s a 0.3 mm so I am looking for a cheap 0.5 mm to paint scales on my lures. Thought about checking out harbor freights to see how it runs.

[@EngineeredAngler]

Let us know how it goes.

[@obvikid5143]

Might not answer but I am wondering what is the liquid you use to make the lures in the silicone molds I know how to make the silicone molds now I jus need to know what are you using to make the lures

[@EngineeredAngler]

It is two part casting resin, you can find what I use in my Amazon store.

[@pmpkmc]

Hang gliding? Did i hear that right?

[@EngineeredAngler]

Yea...been flying hangliders since 1997

[@alexandreespindulaferreira3298]

👏🏻👏🏻

[@Boiadepesca]

Pode me ajudar como fazer as bóias de pesca

[@EngineeredAngler]

Sorry I don't make floats.