engraving a knife

kinda long video but if your learning to engrave might be usefull

[@pierdolio]

I especially like that you have shown your work in real time rather than speeding it up. Nice work.

[@jimmycorn9987]

Very impressive. My only complaint... Why is this your only video? I could watch this for hours. What an artist!

[@facilitador4246]

Nice flow in his work and good execution of his acanthus leaves. Here's a vid you'd enjoy watching of a native artist in the North West, with I understand over 40 years experience teaching and working the fine metals. kzbin.info/www/bejne/i5qvfZSPhctokK8

[@stonesettersrb]

It looks so simple and easy to do,but I know how hard it is as I`m practicing for some time now.Great tutorial from start to finish.I learn so much from it.Hopefully there will be more.

[@Swoop180]

I know it's been a few years but if you want a future in hand engraving remember one very important thing, you rotate the work, not the graver. On another note, I never used a pneumatic graver but I only worked precious metals.

[@FOURTEEFIVE]

I had a neck injury and seeing people with this amount of dexterity in their hands triggers me

[@vindice5849]

Been looking for an engraver for a knife of mine, this is amazing! I can't decide on a design but really love the scroll work

[@mrskeets52]

From an old time leather guy, using an old time leather pattern, I have to say I am impressed,,, thumbs up

[@nudgeA7]

nicest engraving i have seen sofar^^, in the first minute where u start engraving the borders, is a very good idea too, good work mate, keep it up....:)

[@facilitador4246]

Nice flow in his work and good execution of his acanthus leaves. Here's a vid you'd enjoy watching of a native artist in the North West, with I understand over 40 years experience teaching and working the fine metals. kzbin.info/www/bejne/i5qvfZSPhctokK8

[@tonyfennell9481]

It's hypnotic, absolutely fantastic.

[@ErvinandMFantasyFootball]

Great use of the flat to remove the background and undercut the spirals.

[@cbradquillen]

I thought the engraving was pretty cool...but then I found out that you have some chips. That's even better! GIMME THEM CHIPS!

[@blainestockwell6957]

and they're BARBECUE!

[@timbutler5690]

Very most beautiful work.

[@jayval1963]

Nice work never thought about putting art on metal because that’s what it is props for that you must price high I would giving the time and precision it takes.

[@bustergonad3975]

Gr8 workmanship. When I heard the flanker of the gun...I could help thinking I'd stumbled upon Shaun Hughes ...waiting for his accent to kick in.

[@saxman7131]

Awesome. I enjoyed that very much.

[@capncharlie7894]

thank you for sharing your work with the world. It's cool seeing how you quickly finish the scrolls.

[@facilitador4246]

I agree, ... Nice flow in his work and good execution of his acanthus leaves. Here's a vid you'd enjoy watching of a native artist in the North West, with I understand over 40 years experience teaching and working the fine metals. kzbin.info/www/bejne/i5qvfZSPhctokK8

[@georgemadis5481]

Wow, that's really beautiful work! Thanks for the video.

[@ShooterSD72]

Amazing. A pleasure to watch you work.

[@MyVetteDream]

That is one STEADY hand. Outstanding.

[@BlakeKane]

Exceptional work! Thanks for sharing it.

[@juanenriquezs.3461]

I love the nice job! I need started working in my knife, thanks for letters see you work, I liked the way you talk to you kids,,family is very important

[@threecreationleather6596]

Excellent video on how to achieve this style. Thanks for posting.

[@Will_14_years_ago]

Great depth and detail

[@moogybannahilstopaflingon6803]

Really beautiful work...

[@ALSomthin]

This takes a run of the mill knife and turns it into something special and heirloom quality.

[@kirkvanpelt9829]

You make it look so easy.... ;) But I know it is not... Thanks for the video. I have to draw it out first... I have not found an eraser for my graver that works as well as eraser for my pencil. WHAT IS THE CLOTH THAT YOU ARE WIPING THE BOLSTER WITH?? Anxious to see more! THANKS!

[@benromney9279]

This was fascinating. Thank you for the video.

[@codiekennedy8046]

Great video bud and good engraving i just started knife customization as a hobby and cant wait until i can do something like this.

[@codiekennedy8046]

Watching more of the video i changed my mind, you are awesome and i will never be able to do that. Basic scrolling though i hope to do

[@GTAV4LYFE]

How the hell did this vid get 100k+ views and less then 1k likes!! Amazing work!!

[@stevenstreatfield5087]

interesting for people who not into that craftsmanship.....to watch for a bit and then turn off

[@rickstrodder129]

Marvellous work. Pleasure to watch?...thanks for taking the time to film and share.

[@samuelschneider9067]

This is strangely satisfying

[@MGMuhlhauserSohneKnives]

We should get together on some joint projects! Always looking for a good engraver. Nice work!

[@EstablishedLowriders]

Great work 👍thanks for sharing your knowledge and talent with us💯👊

[@bentleygt3716]

just GORGEOUS . Love it.. thank you for sharing.

[@silverestore]

Beautiful job!

[@masterp3598]

DAM...thats good looking work

[@kristibbradshaw]

Beautiful. I want to learn how to do this.

[@voss1019]

I liked the part with the bbq chips lol

[@davidwhiren817]

Looks like a Moore Maker !!!

[@andykinew]

Amazing work! Very beautiful

[@bigred3169]

great work boss

[@gimpynewman8893]

can you tell me what you are using to engrave ? Its very pretty. Thanks for sharing.

[@CrisGar76]

Amaizing

[@KingBuilder]

Looks like you have done that a few times.

[@johncantrell8873]

Maybe someday I'll be able to do this tool. Good video thanks..

[@chuckbowie5833]

Incredible.

[@hollyguthrie5107]

The buzz makes me think of a tattoo gun. And now I want another tattoo. Darn it.

[@2ndchanceinlife]

lol

[@magicianTimTyler]

machine tattoo machine

[@pigidly]

Amazing

[@nudgeA7]

did u make the bit urself, i like the way it scoops up^^

[@tpmustang]

What kind of tool do you use for this stainless steel cut? where to order them? thank you

[@ankitsoni1820]

Hii! I'm also an engraver from India, here our technique and tool are different. Love your work! And would like to learn your technique. Is there any way to contact you?

[@jakelevinson7802]

What tool are you using?

[@moralesfinster]

where can i buy a tool like this :0

[@afiladosafilox-candido]

Hi friend... amazing your work ...what it is called the apparatus with which the engraving do?

[@rockguy707]

I love your work, and I am trying very hard to get into engraving myself. but I need some advice. I bought a double engraving machine from china with a small and a large hand pieces. I was told that there would be instructions on how to use the equipment. it was in broken English and I really can't understand it.. Are you willing to give me some advise? I have several questions. if so pleaseprivate message me when you get a chance, Thank You Dave

[@tomwatson2430]

If you did the same as me and got a blue cheap one that takes 2x aa batteries you might as well throw it away! I got one with a rounder fat end and a thin pointed end but they don't rotate fast enough and the nibs are made of cheap metal,if you are serious and want to put the time in to get good I would recommend you look at the "mcclay micro motor and a large selection of tungsten and diamond and rubber nibs,I suggest watching a glass engraver on KZbin called Leslie I think . Her tutorials and skill are the best I've found ! Hope this helps,tommy uk

[@davidhall4140]

Very nice engraving ,, I'm also curious about the handle , Is it aged bone that has turned a yellow color or yellow Micarta or ?? Anyone ?

[@tat2ninja]

Thanks for sharing...nice work!

[@savestheday258]

What type of lead do you use on the metal line that? No Chinese white correct? I've been trying different leads and none seems to be very dark on metals. Any help is much appreciated! Thanks in advance and keep up the awesome work. Very inspiring

[@BigBlueSwisher]

Nice, fantastic work

[@rinaldofaria]

Which tool do you use? Where can I buy one and acessories?

[@lelongclaude8181]

Superbe

[@scottbarnett8189]

Man im really wanting to start learning to engrave could you send me in a good direction of where to get good tools and a list of must haves

[@huskyfluffy]

Do you think there is a difference in how the hand engraving looks compared to the power. I am about to learn the art form. But am worried about the repetitive motion of the hand work... since the person I'm learning things from.... his wrists are ruined from decades of it. Yet, I won't be doing they type of work he does...

[@lampoon154]

Great video, thanks for sharing!

[@inkedbyart6734]

Great work !

[@mikelboi87]

Great work.

[@joselacera8716]

I LOVE YOUR WORK IS BEAUTIFUL YOU DON'T HAVE PNEUMATIC ENGRAVER FOR SALE

[@Darts609]

Is this hammer and chisel or air compressor?

[@jamesperkins9833]

Very nice!

[@williambertrand2475]

What a master !!!!!

[@ljrodriguez64]

Hi, what graver do you used to engrave the knife? Thank you

[@chadthunderstroke]

Same question. I hear air, of course, but..

[@michaelgordon18]

Brilliant.

[@aaronderossett3998]

I know this is very late, but what about engraving the rivets that hold the handle together also?

[@brucevandegrift2655]

I need the tools, can’t find em, don’t know what you are using,,,, I’m a glass artist and would love to do this on guns

[@kristibbradshaw]

What kind of engraver do you use????

[@prakashpathygold8878]

Nice

[@masterp3598]

I make custom knives in North Pole but would love to know how to engrave my bolsters. I think if you could tell me everything I need it would be a great help. Maybe I could work something out with you. My website is AKFNK in Alaksa's Far Northern knives

[@Tiolalo208]

Chisel hammer set up do you use for this? Thanks!

[@DetectionAtilla]

Hello what machine do you use there with equipment do you have a product link please

[@stevencrawford7029]

Bbq chips? Check yeah!

[@ernstfischer464]

Grandiose Arbeit sehr sehr schön

[@vittoriovittorio1441]

Meraviglioso 🥇

[@kinggolden9004]

Good

[@alekzgarcia2671]

what kind of tools are you using? I want to start engraving Zippos

[@timbutler5690]

I always wanted to know how it’s was done. What is the historical reason for the circular design.

[@alierem4266]

One thought is, researching scroll and its' origins/signifigance from older era. As widely known in engravers' circles, English/European and North American scroll designs are different in size and detail.

[@nickhoekstra6859]

Amazing great work

[@marcogasparini2823]

Dear Griff, I am Marco fron Italy, one question for you... what tool do you use to make these engravings? Please send me model and brand, where can I buy it? Many Thanks for your help ;-) ciao Marco

[@savestheday258]

I'm almost certain Griff uses grs gravermax or similar model. Lindsay airgraver is a great tool as well! Italy is an amazing place to learn as they have some world class engravers. Enjoy

[@dabforge5731]

Waiting for my graver to get here. Can't wait to put in some time!!

[@didndido3638]

What's the progress then?

[@NoblieEu]

Thank you for a video!

[@capoNuvolaRossa]

i will to start with this tipe of works. wich tools i need? can u help me?

[@LeeRoyB4L]

I would be interested to know what material the tool consists of

[@DucPhamtacolayo]

you are awesome

[@r.s.5663]

I like your work.... and Bar-B-Q chips, if ya wanna share them

[@ronincustomz]

im starting to do custom tomahawks. what kind of workstation is he using? i like how he can rotate it.

[@motoqueroreaca8]

Very cool !! , what the name of this tool ??

[@ReinisStripnieks]

www.ebay.com/itm/Updated-Pneumatic-Engraving-Machine-Double-Ended-Impact-Graver-Jewelry-Engraver-/111852777584?hash=item1a0af1f070:g:2uoAAOSwHPlWc4S3

[@sylvankatz3060]

Thank you

[@rinabinette]

Awesome work! How about oiling the turn table to get rid of the squeak?

[@valentinvautier7620]

May i please ask what tool you are using to engrave the knife with?

[@jakethejeweler3092]

Grs pneumatic graver with cobalt tip

[@mikestonelake5310]

Do you use a microscope

[@eight-dg3oz]

What engraving bur are you using

[@NColinCorfixsen]

For someone who is just starting to read the horror manga Uzumaki by Junji Ito, watching this is kinda creepy.