For everybody with back brakes that stick They work just like hydro brakes now
Пікірлер: 34
@luisitocolon20113 жыл бұрын
Thanks buddy I was too afraid of going in there with a little more power with the Sandpaper I just went over it real lightly on another note you got me laughing my butt off when you say the word brakes and you hear the whistle like the otter from Winnie the Pooh at 2 minutes and 17 seconds but yeah thanks on the tip
@georgeluther140911 жыл бұрын
Can you do a vido on how to get the brake pads out of the caliper please
@K1DTC9 жыл бұрын
Nice video, my pads were sticking and I did the grinding like you and all was perfect. Thanks for sharing
@xboxdude7648 жыл бұрын
Hey I know u said that you weren't going to take apart the caliper mechanism because it's too complicated, but I havnt been able to find anything on the web of how this thing is assembled. It would be much appreciated if you could make a video on the whole disassemble. Thx if your reading this :)
@WestHaddnin Жыл бұрын
Any luck?
@chrisleizear33157 жыл бұрын
Not gonna judge but I believe you shouldn't use a grinding wheel on your caliper, what you should use is a decent drill or dremel with a wire wheel attachment to just take all the rust, dirt, grime, etc. off the caliper, then for a lube I would use silicone( I have a metal spray can) or maybe PB blaster. Then again whatever works.
@hippiehomesteader23772 жыл бұрын
you are supposed to have an rubber O-ring on the groove of the NEW pad so water and mud don't get in ur caliper, once the oring is installed the brake pad will no longer fall in and out like that. But props for cleaning it up
@speedfreak82006 жыл бұрын
Kids clean with scuff pad but do not grind metal away & use the proper lube.I agree on the shorty cable
@timgile889111 жыл бұрын
now your o-ring seal will mot work with it that lose....
@SuperThugnifacent3 ай бұрын
I might do this bro I'm on a budget and just need the rears to work Incase the fronts don't work I'ma mainly use the front but just have the rears fixed I'm hoping this works
@sethat8e11 жыл бұрын
you should do a video on clutch control :)
@Axel357866 жыл бұрын
What tap size did u use on the bolt that stripped out
@Amoody20311 жыл бұрын
How do you tighten the brakes?
@dougj70084 жыл бұрын
Where do I find these pads???
@steveringer714310 жыл бұрын
If you take out too much with the grinder your brakes are guaranteed to stick or seize. That extra space you grind out and oiled will attract dirt now. Thats gonna make em stick..
@donrutter67656 жыл бұрын
Caliper is a machined fit. Deep scores can be filled with JB Weld and sanded smooth. You should have turned the piston on a lathe if you wanted clearance, Clarence.
@outdooradventures13955 жыл бұрын
If you could take apat what Prodigy said that would be great
@mizisawesome487 жыл бұрын
I have questions my blaster has no caliber or wires can u help me with what all I need
@Markmead74 жыл бұрын
zack P Ur gonna have to buy a caliper, break cable
@mizisawesome487 жыл бұрын
I really need help
@nickcurran84297 жыл бұрын
I was going to fix mine for the same thing
@tac12gaming92 жыл бұрын
Do not listen to this kid you're going to end up getting water inside your caliper and you're going to end up f****** the whole thing over do not grind it with a grindstone use a little wire brush on a air tool and go easy on it it should not slide in and pop out that easy it should take a little bit of thumb pressure to push it through just a little bit
@snyderkurtis10 жыл бұрын
can anyone tell me the reason why the stock break line goes up to the handlebars
@mynumberis555555510 жыл бұрын
for the parking break
@drakechartrand38435 жыл бұрын
Bro can we be friends?
@RichMurray69 Жыл бұрын
How many times r u gonna show it falling in and out
@BobSmith-mc7uq8 ай бұрын
Are you still "triggered" about that piston falling out, Skippy?
@theamazingdefault9725 жыл бұрын
It slides in and out in and out in and out oh yeah does that feel good.loljk
@shawnp84298 жыл бұрын
It will fall right in and out
@Grip-n-Rip-It Жыл бұрын
Like 100 times
@scottymerrick5193 жыл бұрын
Useless info. Don’t put oil anywhere near your brake pads unless you want your brakes to slip