Ep 147: Making Our Boat Strong For Epic Iceberg Sailing!

  Рет қаралды 87,050

Ship Happens

Ship Happens

Күн бұрын

Пікірлер: 267
@oldschool1993
@oldschool1993 Жыл бұрын
I always smile when I hear you Brits refer to "Hoovering" , a term derived from the Hoover vacuum cleaner invented in the good old USA.
@Dave5843-d9m
@Dave5843-d9m 6 күн бұрын
We do the same with Biro pens which are disposable ball points from France. “Bic Biro” is another. Bic is also French.
@ToddTalksTech
@ToddTalksTech Жыл бұрын
Congrats you two! You have made every retired math/geometry teacher weep with joy.. you covered every angle masterfully.
@thomasnewton9818
@thomasnewton9818 Жыл бұрын
In America, we used to have the 5 cent and dime stores. That was when I was a very young boy. I'm 64 now, and the dollar stores are much more than a dollar.
@TheAverageDutchman
@TheAverageDutchman Жыл бұрын
If you keep having to hit that cut-off saw to get it spinning, I'd suggest looking up what carbon brushes the motor needs and swapping them. It can do damage if you keep running it with worn brushes and they cost under 10 GBP usually. Amazing work as always, keep plugging away at it. There's probably never going to be a day the critics will be silent, but I'm sure you'll stop hearing them as you sail off on Sarinda for her next adventure.
@garymilstead4199
@garymilstead4199 Жыл бұрын
As a man blessed with 53 years of holy matrimony I salute you both on your teamwork. You were made for each other.
@Dean36014-
@Dean36014- Жыл бұрын
Brilliant work. The music was very fitting to this video. Very relaxing
@alangurman3961
@alangurman3961 Жыл бұрын
I must of missed something. What music?
@FlyingConey
@FlyingConey Жыл бұрын
Amazing progress and good level of craftsmanship. Wooden boatbuilding is one thing but doing it outside in the wind and the rain and the cold is on another level. It's great how you go thought this challenge with so much positive energy. I know how frustrating it can be if you want to finish a step and then it starts to rain and you have to stop. All the best!
@renexxx2017
@renexxx2017 Жыл бұрын
Bedankt
@ShipHappensUK
@ShipHappensUK Жыл бұрын
Thank you so much!
@donclay3511
@donclay3511 Жыл бұрын
Nice music and time lapses to accompany your normal awesome banter. Keep on keeping on. :)
@ShipHappensUK
@ShipHappensUK Жыл бұрын
Glad you like them!
@geoffhaylock6848
@geoffhaylock6848 Жыл бұрын
Sarinda looks just a little bit better with every episode. Keep up the great work!
@seankearney2592
@seankearney2592 Жыл бұрын
Yis are Flying along ... I'm Loving it...
@shawnmts7109
@shawnmts7109 Жыл бұрын
I'm sorry the best i can do to helps is to give you a thumbs 👍, when money is needed to but fiber on your wooden ribs. Looking good
@nicktomlin9137
@nicktomlin9137 Жыл бұрын
Geometry teachers would smile with joy. Your mastery of angles is a joy to watch. She's looking incredible and will be immensely strong. Well done, you two 😊
@ShipHappensUK
@ShipHappensUK Жыл бұрын
Thanks so much 😊
@nicktomlin9137
@nicktomlin9137 Жыл бұрын
@@ShipHappensUK You're more than welcome🙂
@Peter-jo3wt
@Peter-jo3wt Жыл бұрын
Associated angles are always complementary. Easy peasy. But it isn't for most people, and IT IS impressive that you've got it down 😉👍
@Dave5843-d9m
@Dave5843-d9m Жыл бұрын
It’s three dimensional thinking. CAD systems allow most folk to make useful stuff but most folk really do struggle.
@Bob8091
@Bob8091 Жыл бұрын
You are doing an amazing job. I can't be the only one who rewound to look at the before and after picture. A whole vlog of them at the end of the project would be a good thing to show what has been achieved.
@billgolcher2537
@billgolcher2537 Жыл бұрын
Awesome job I have a delta bandsaw just like yours I agree not the best but it really fools you it really stands up to the task and shine great job
@stevejohnstonbaugh9171
@stevejohnstonbaugh9171 Жыл бұрын
Suggestion; bring your nice compound miter saw up on deck so you don't have to walk back and forth with all these fiddly cuts. Your progress will be much quicker 👍
@simonmercer9530
@simonmercer9530 Жыл бұрын
Looking good 👍🏼
@ShipHappensUK
@ShipHappensUK Жыл бұрын
Thanks 👍
@dennisrobbins5451
@dennisrobbins5451 Жыл бұрын
Personally I am totally impressed with your wood work. You single handedly have replaced some much damaged and rotted wood, just WOW! Can't wait to see what the new decking looks like.
@ShipHappensUK
@ShipHappensUK Жыл бұрын
Thank you very much!
@brucevogel2693
@brucevogel2693 Жыл бұрын
That "Before and After" images of the Bow, really brings home all the improvement which has been made. Good job!
@TheShootinStar
@TheShootinStar Жыл бұрын
Ha! I thought he was saying "pawn shop" when he was actually saying pound shop. Here in the U.S. we call them dollar stores.
@philroberts7238
@philroberts7238 Жыл бұрын
Just as well you didn't think he said "porn shop"!
@dougp59
@dougp59 Жыл бұрын
Simon and Jemma, I just love your channel and watch it all the time. I love your spirit, camaraderie and a couple, the way you bounce ideas off of one another, and your shear genius at figuring out all the bad wood replacement, cuts, etc. As a D-Day buff, I can't wait to see your episode going across the Channel. I'm sure you'll have a full boat, and, hopefully, one of the last D-Day veteran from the British Army accompanying you two. God Bless!
@ShipHappensUK
@ShipHappensUK Жыл бұрын
We can't wait for that day either!
@davidflamee
@davidflamee Жыл бұрын
It never ceases to amaze me how you transfer those angles to the wood and the saw. It's a joy to watch, and learn. Thank you to all the supporters through which this is made possible. More great progress, well done you's.
@JohnKenIRB233
@JohnKenIRB233 Жыл бұрын
WOW, in addition to the cutting and careful fitting, I can not imagine how you can find/afford the diverse materials you use each week. Thx for bringing us along.😊😊😊 John Ken
@hapewe6052
@hapewe6052 Жыл бұрын
brilliant wood works! and your 3D-measuring-skills are perfect 👍😁 Best from northern Germany!
@rossnolan2883
@rossnolan2883 Жыл бұрын
Epic 😊😊😊😊
@colin125gwr
@colin125gwr Жыл бұрын
the pointy bit is looking good
@ShipHappensUK
@ShipHappensUK Жыл бұрын
Sure is!
@noelbowerman1562
@noelbowerman1562 Жыл бұрын
Quote of the day,"not that ,the hoover"lol. I'm well impressed ,with your methods, to working out complex angles.
@madisonbusman7688
@madisonbusman7688 Жыл бұрын
Should name her Perfection! Beautiful work and again great filming. 👍
@abritishguy7295
@abritishguy7295 Жыл бұрын
I was just watching the new season of RNLI saving lives at sea, and your boat is shown in the background on the first episode of season 8
@SteifWood
@SteifWood Жыл бұрын
To me (and perhaps to you too) this was the most satisfying moment of the rebuild so far: fitting the blocks and leveling all the pieces down to fair and flush with deck level. mmm
@ShipHappensUK
@ShipHappensUK Жыл бұрын
I think for us the most satisfying so far is in next week's video!
@SteifWood
@SteifWood Жыл бұрын
@@ShipHappensUK Looking forward ... as I always do.
@alstonofalltrades3142
@alstonofalltrades3142 Жыл бұрын
For those who want to adjust band saw tracking without the cover being open. Just adjust the tracking while it's still. Switch it on and off and when it stops open the cover to see if it needs more adjusting.
@Hairnicks
@Hairnicks Жыл бұрын
You have to have a particular sort of brain to see how the wood shapes on the saw for the cuts, brilliant! I reguarly cut my mitres back to front on skirting boards and architraves, all credit to you guys, you have learned and passed on so many skills. You two are an inspiration to many. Congratulations.
@ShipHappensUK
@ShipHappensUK Жыл бұрын
😘
@jimmy6754
@jimmy6754 Жыл бұрын
It's really starting to take place now, down to the good parts of the project, I can see that deck down in all😂fairplay to yous....... Boat🎉🎉🎉😂😂😂
@cedricgreen8460
@cedricgreen8460 Жыл бұрын
I think what you have achieved so far is amazing 👍👍👍👍👍
@kathrynaston6841
@kathrynaston6841 Жыл бұрын
The front of the boat looks amazing!! What a difference!
@kimpulsipher647
@kimpulsipher647 Жыл бұрын
She's looking wonderful! Congratulations 🎊
@ShipHappensUK
@ShipHappensUK Жыл бұрын
Thank you! 🤗
@andreamundt
@andreamundt Жыл бұрын
Very enjoyable episode! N-i-c-e filming! Thx so much, *= )*
@letsbefrank6269
@letsbefrank6269 Жыл бұрын
Superb carpentry skills, lovely to watch your progress. 21:17 😊
@alanf6604
@alanf6604 Жыл бұрын
"Hang on I was going to Hoover that" .... "Snarl, Snarl Mutter, mutter" Love it. Well done its one heck of a Task
@michaelhibbert4393
@michaelhibbert4393 Жыл бұрын
Lovley to see her slowly coming back to life…..always look forward to your weekly vlogs
@errolseager1292
@errolseager1292 Жыл бұрын
You 2 crack me up with your wit, usually a bit of innuendo thrown in "Turn me on Simon, not that, the Hoover" if I lived in your area I would be there helping you with this project, the work might be a bit daunting but you both appear to have fun doing it, keep up the good work.
@jimmyjohnstone5878
@jimmyjohnstone5878 Жыл бұрын
You made a good job of getting that new wood to fit. Working in the cold is no fun...wear good thermals and a windproof layer.
@johnnorth77
@johnnorth77 Жыл бұрын
Look so good 👍⚓
@waynecummins9713
@waynecummins9713 Жыл бұрын
Great work, you guys from Hampshire 🇬🇧
@eddyhammerton3310
@eddyhammerton3310 Жыл бұрын
great to watch your team work and Simon is so quick to work things out both of you are so practical.
@waynerowlinson6177
@waynerowlinson6177 Жыл бұрын
Amazing work! It's funny, I discovered this channel a while back after my wife brought up the idea of us building an old-school wooden rowboat together. I'm talking about a 15 footer (4 1/2 meters). What you guys are doing is nothing short of spectacular. Just wow! Our boat building adventure is on indefinite hold for now, but if you can do what you've done with an 80 year old ship, it gives me hope that we can make something that looks like a boat and floats.
@ShipHappensUK
@ShipHappensUK Жыл бұрын
Hi Wayne, I hope one day you and your wife do rescue an old boat! It's great fun!
@Vegathlete
@Vegathlete Жыл бұрын
High levels of integrity, aesthetic, functionality, commitment, and perseverance. Very nice work!
@ShipHappensUK
@ShipHappensUK Жыл бұрын
Thank you kindly!
@lauralake7430
@lauralake7430 Жыл бұрын
Deck! A deck! Getting fancy, dont you think? Amazing work you two!🎉❤
@stevenholton438
@stevenholton438 Жыл бұрын
I would definitely invest in a quality sliding bevel without the annoying bump on it, you will be needing it more than anyone else on the planet methinks! Sarinda is forging an unbreakable bond between you two...a highly enviable relationship!
@marklapierre5629
@marklapierre5629 Жыл бұрын
You two are brave souls taking on that job.
@markk4285
@markk4285 Жыл бұрын
Fantastic work folks. Wonderful to see the boat get its strength back in the bow. Congratulations from Dublin. Mark K.
@louisjadot9194
@louisjadot9194 Жыл бұрын
I Luv the way you two work together, you make a good advert for marriage. Some one will employ you to for a wedding couple success story .
@ShipHappensUK
@ShipHappensUK Жыл бұрын
It's easy when your working with your best mate!
@fonhollohan2908
@fonhollohan2908 Жыл бұрын
You's two are doing a fabulous job on this boat. I'm so impressed with what you've both done so far!!!! congrats. It's looking great!!! Once you get the deck on her she'll be a solid boat.
@ShipHappensUK
@ShipHappensUK Жыл бұрын
Thanks so much!
@knutarneaakra6013
@knutarneaakra6013 Жыл бұрын
Great work great music also!😊
@bruceyoung1343
@bruceyoung1343 Жыл бұрын
I’m so happy your at that point on reconstruction and improving on the deck supports. Gonna be great when The actual deck boards are getting installed so happy for you two. CHEERS
@Videostufftas
@Videostufftas Жыл бұрын
Great job looking fantastic 🛳️🇦🇺
@adrianabbott4623
@adrianabbott4623 Жыл бұрын
I forgot to mention last time when you were talking about planking the deck. I think boats had a plank down the centre line which was about twice the width of the normal planks and was called a King Plank.
@kevinmartin3859
@kevinmartin3859 Жыл бұрын
That is a grand job well done 😊😊😊
@syzfilms
@syzfilms Жыл бұрын
Love love love watching you two work and joke your way thru each challenge.
@TenaciousCovers
@TenaciousCovers Жыл бұрын
Super impressed with the progress you are making and your work ethic is exemplary. And you look like you are having fun too. Looking forward to the next update 👍🏼❤️
@davidharris3165
@davidharris3165 Жыл бұрын
Using that radial saw made me laugh! Mine sticks in the on position (potentially more dangerous) and I hit it with a bit of wood too!
@davidbotterill7549
@davidbotterill7549 Жыл бұрын
That bow looks really solid now. Such skill in cutting angles. Can’t wait for the next episode. Dave Birmingham
@garymucher4082
@garymucher4082 Жыл бұрын
It takes a combination of so many angles to make every piece fit properly. And you two know that as well and hand fit them all. That takes a lot of real dedication and finese... Thumbs Up!
@joelkarch3538
@joelkarch3538 Жыл бұрын
wow that wood is fresh!!!!! that boat ship is going to be so nice and fresh .ive been wachin a while.i cant wait too her sail!!!love you guys!!!!
@laptopuser3323
@laptopuser3323 Жыл бұрын
Gday guys
@gregsecore9625
@gregsecore9625 Жыл бұрын
you guys are doing a awesome job when I first saw use working on his boat I never thought it would turn out like it is you guys are doing that excellent job keep up the good work.
@BartonHans
@BartonHans Жыл бұрын
It's freaking working out! Excellent!
@kevinmarsden7447
@kevinmarsden7447 Жыл бұрын
Hi I've been watching for over 12 months now you both chill me out its great to se your so lade back I've never been good with wood your both good teachers I'm. Slowly getting better. Keep up great work.😊😊😊
@marksmith-ew7ir
@marksmith-ew7ir Жыл бұрын
Great job slow ,but trying to get right is a task in it self considering serinda as built quick and little floors in the building wasn't a problem she done her job in past years,keep going hopefully the front deck Will be done before the Snow stops outside work.
@prodkey
@prodkey Жыл бұрын
Bravo! Once you get that bandsaw dialed in you will really appreciate it. Bands/blades have different sizes for small turning corners to “re-sawing” like you were doing. Your work is pretty darn good guys!!!
@ShipHappensUK
@ShipHappensUK Жыл бұрын
Thanks for the tips!
@michaelgillett5477
@michaelgillett5477 Жыл бұрын
Hi there, Simon, it’s sliding down the actual bed used to work in a sawmill many years ago where you have a fence. If you put the fence on the bottom part of the bed, you’ll find you don’t actually slide so much. Hope this helps Michael from Hampshire
@Tennessee101AB
@Tennessee101AB Жыл бұрын
Epoxy requires wormer temperature to set up I believe
@fishingforbiteswithmo
@fishingforbiteswithmo Жыл бұрын
Great work guys nice to see your hard work paying off 👍
@scottsorby7966
@scottsorby7966 Жыл бұрын
Totally agree with Simon, if you need safety labels and warnings then you really need to stay at home, safety starts and finishes with the person doing the work. Bow looks solid, won't be long till you're planking that area
@stefano7874
@stefano7874 Жыл бұрын
Bravissimi bel lavoro
@Gregdubas69
@Gregdubas69 Жыл бұрын
Looks great
@harrisonandrew
@harrisonandrew Жыл бұрын
All those angles would do my swede in. Nice job guys.
@jeanhawken4482
@jeanhawken4482 Жыл бұрын
Lovely patient work. Congratulations
@glyndevonport7802
@glyndevonport7802 Жыл бұрын
Getting better all the time. An observation. When cutting a bevel using a bandsaw I find it easier and safer to have the fence on the lower right hand side of the table. That way the upper blade guard can be lower and closer to the wood being cut which helps to prevent the blade wandering. It also takes the weight of the wood rather than you having to exert pressure to hold the wood against the fence. This also reduces the risk of the blade binding within the timber due to it sliding away from the fence or too much pressure being applied to the workpiece.
@whitby910
@whitby910 Жыл бұрын
Outstanding. Well done.
@ShipHappensUK
@ShipHappensUK Жыл бұрын
Thank you kindly!
@davidantill6949
@davidantill6949 Жыл бұрын
Great as always...well done!!!
@keithchessun5085
@keithchessun5085 Жыл бұрын
What a transformation !! Well done.
@ShipHappensUK
@ShipHappensUK Жыл бұрын
Thank you!
@rickswanberg4995
@rickswanberg4995 Жыл бұрын
When you adjust the tracking on the band saw (position of blade on wheel) the gullets of the teeth should be just clear of the side guides on the upper and lower guides. The rear guide (usually a bearing) should be adjusted so it is just clear of the blade back when not cutting. (back it off before adjusting the tracking.
@MrDominicBrant
@MrDominicBrant Жыл бұрын
Haven't been able to keep up to date and feeling a bit guilty. I'll have a super-binge watch soon. You're a very special double act. Hope the kids are doing well. Respect.
@SteavenGilmore
@SteavenGilmore Жыл бұрын
for your gaps, you could take a lot of the sawdust you are making, mix it with you epoxy, it will blend well enough to hold paint and it looks good too.
@ShipHappensUK
@ShipHappensUK Жыл бұрын
Thanks for the tips!
@jamesa7506
@jamesa7506 Жыл бұрын
You two got quite a lot accomplished in this video, well done! 👍
@shaneneedham2259
@shaneneedham2259 Жыл бұрын
Amazing work I can’t believe how good it’s looking , she’s going to be a beautiful boat one day
@chrisfairbrother9197
@chrisfairbrother9197 Жыл бұрын
Are you both are always keen to learn: the adjustment to move the bandsaw blade is called tracking, and the triangular holes you left near the breast hood are called limber holes. Keep up the good work 👍👍
@mikakari9498
@mikakari9498 Жыл бұрын
That looks very solid! Good work! 👍👍
@ShipHappensUK
@ShipHappensUK Жыл бұрын
Thank you! Cheers!
@trevorpalmer1891
@trevorpalmer1891 Жыл бұрын
Great Job!
@ShipHappensUK
@ShipHappensUK Жыл бұрын
Thanks!
@Peter-jo3wt
@Peter-jo3wt Жыл бұрын
Ya need all 11 fingers🤣👍 Those tiny little bandsaws are all too easy to lose fingers on. There's virtually no room to see what you're doing.
@johnrobbo69
@johnrobbo69 Жыл бұрын
Good job there’s nothing around with a really big blade that could chop things up! Brilliant video, thank you.
@IanDarley
@IanDarley Жыл бұрын
Compound angles are hard.
@brianwillerton8659
@brianwillerton8659 Жыл бұрын
'Sittin' on the dock of the bay, watchin' the tide roll away...'
@2thehook773
@2thehook773 Жыл бұрын
Love what you're doing!
@anthoneyking6572
@anthoneyking6572 Жыл бұрын
Great Job Guys and Girls you both making the Ship really Strong and its Looking Good thanks Great Vlog
@johnsivyer4570
@johnsivyer4570 Жыл бұрын
put the sawdust into the epoxy mix as a filler it will match in
@MrMattDat
@MrMattDat Жыл бұрын
So, so happy to see the bow coming together!! GREAT job!
@richb313
@richb313 Жыл бұрын
Bit by bit step by step you are getting closer to installing the deck great job guys.
@malcolmadams1051
@malcolmadams1051 Жыл бұрын
Where are you doing your sea trials? If you are sailing accross to Malaysia, My wife and I will book passage to Penang. Subscriber rates.
Ep 148 All We Need Is A Deck For This Boat! #boatrestoration
33:23
Ship Happens
Рет қаралды 94 М.
Ep 44 - We Move Our Boat For The First Time, And Do More Woodwork!
30:59
Beat Ronaldo, Win $1,000,000
22:45
MrBeast
Рет қаралды 158 МЛН
Правильный подход к детям
00:18
Beatrise
Рет қаралды 11 МЛН
To Brawl AND BEYOND!
00:51
Brawl Stars
Рет қаралды 17 МЛН
248. A seemingly impossible historic ship restoration!
19:23
CruisingTheCut
Рет қаралды 399 М.
I Spent 1 Year Alone Building My First LOG CABIN With No Experience
1:58:01
Our Biggest Boat Failure Ever!
23:32
Ship Happens Adventures
Рет қаралды 121 М.
Restoring 34yr Old Fuel Tanks with YESWELDER &  RAPTOR Paint! #boatrestoration
30:21
Ship Happens Adventures
Рет қаралды 62 М.
Ep 131 Engine Run & A Day In The Life Of 2 Boat Builders!
30:03
Ship Happens
Рет қаралды 95 М.
Beat Ronaldo, Win $1,000,000
22:45
MrBeast
Рет қаралды 158 МЛН