Рет қаралды 531
In this episode I get the axles installed from S&P Automotive! I cover pretty much everything you need to know about installing them, including your options for modifying them to work. You'll either need to grind the lip on the backside of the hub if you're using MK1 hubs, upgrade to later model Cabriolet hubs, or install spacers from Tech-53. The spacers don't work with all axles available, so I had to modify mine slightly, but this was definitely the path of least resistance. If you're using an 02J transmission, you'll need to swap the 108mm axle cups for 100mm axle cups.
S&P Automotive VR6 Axle Set - s-pautomotive....
Tech-53 VW MK1 100mm Outer CV Joint Spacer For 90mm Spindles - tech-53.com/pr...