Ep10. Big Block Chev, goes in the HT Monaro junkyard build. Turbo400 and Nitrous

  Рет қаралды 11,982

Motor Fab Channel

Motor Fab Channel

Күн бұрын

Пікірлер: 61
@asash4435
@asash4435 4 жыл бұрын
Bosch Blue Crew 👌 Really digging the build and the welding tips. Keep up the good work 👍
@motorfab
@motorfab 4 жыл бұрын
Haha I’ve got so many Bosch blue tools! Sucks that they’ve revoked most of the dealers and authorized repairers, it’s made it very difficulty run a workshop using their stuff.
@damienwatts6698
@damienwatts6698 4 жыл бұрын
Keep up the good work Luke the big block looks right at home in there 💪🏻💪🏻💪🏻
@motorfab
@motorfab 4 жыл бұрын
SNUG! Love it!
@trevorsmith9251
@trevorsmith9251 4 жыл бұрын
Looking good, hopefully Willowbank will be open soon, see you out there 👍🔥
@motorfab
@motorfab 4 жыл бұрын
I can’t wait to race again!
@kaneo6394
@kaneo6394 4 жыл бұрын
Looks good, will be following the bulid 👍
@onesilvergrey
@onesilvergrey 4 жыл бұрын
Mate no stress on the mic, it sounded heaps better this time. Love the rear xmember allowing all the room for the pipes etc, before it was mounted and explained, I thought you'd been inhaling too much argo shield.
@anthonyrgstocks8282
@anthonyrgstocks8282 4 жыл бұрын
Monaro big block love it. Subscribed instantly..
@motorfab
@motorfab 4 жыл бұрын
Thank you.
@AndrewPocko
@AndrewPocko 4 жыл бұрын
Looking good Luke. I run one of the booster less master cylinders on my ute and it works mint.
@motorfab
@motorfab 4 жыл бұрын
Thanks man. They’re the best.
@jmills83
@jmills83 4 жыл бұрын
I like the cameo appearance from Steve. That was my favorite part
@motorfab
@motorfab 4 жыл бұрын
Haha he didn’t know I was filming! He hates the camera
@pauledwards9416
@pauledwards9416 4 жыл бұрын
Yeah Steve
@charlesgalea69
@charlesgalea69 4 жыл бұрын
Great video today keep up the good work
@motorfab
@motorfab 4 жыл бұрын
Thank you for the great feedback.
@stevenkosmac631
@stevenkosmac631 4 жыл бұрын
Now that's a mad car no pretty parts but so beautiful . Love ya work bro
@motorfab
@motorfab 4 жыл бұрын
Thank you
@littled1394
@littled1394 4 жыл бұрын
Good job mate looking tuff as 👍
@motorfab
@motorfab 4 жыл бұрын
Thanks, I’m really looking forward to driving this thing!
@MrPig208
@MrPig208 4 жыл бұрын
Fark Yeah Man!!! Awesome stuff Luke Will drop your Wiper Motor Relocation Kit off during the week ;-)
@motorfab
@motorfab 4 жыл бұрын
Legend!
@pauledwards9416
@pauledwards9416 4 жыл бұрын
Thanks
@hankwiltschut
@hankwiltschut 4 жыл бұрын
Great channel Luke. Subscribed. I'm very interested in learning more about the weld in structural cross member that you say your going to supply. I'm fitting a Tremec TKO600 manual to my HT Monaro and your weld in version looks like it will solve all my head aches... When do you reckon that part will be available? Will I find it on your website? I need it asap lol. Keep up the good work man.
@adamheazlett1179
@adamheazlett1179 4 жыл бұрын
Great to see your welding up . Watch you tube U S A they weld down around backwards any way but the right way.Does that blue paint still smell weird sweet?
@lindsaymcpherson4744
@lindsaymcpherson4744 4 жыл бұрын
Love the series its not an easy fit a fatty in a k t g. The more popular gearbox swap is a glide as there's very little mods to the car. Great to see the TH 400 in her but !! Please weigh the car when finished. !!!
@GWhizzJhangaPakato
@GWhizzJhangaPakato 4 жыл бұрын
Kinne!!-Luv-the-new-channel-mate-lol Nah-but-good-watch-mate-will-have-to-come-and-see-ya-when-i-get-a-new-project
@motorfab
@motorfab 4 жыл бұрын
Thanks
@mickwebs
@mickwebs 4 жыл бұрын
Keep up the Good work
@motorfab
@motorfab 4 жыл бұрын
Thank you, many more fun times ahead!
@ytlofty350
@ytlofty350 4 жыл бұрын
Good stuff looks great
@motorfab
@motorfab 4 жыл бұрын
Thank you.
@ziggassedup
@ziggassedup 4 жыл бұрын
That's a big chunk in there...So what racks do you guys use.?...I've got a HR crossmember with "HJ" stubs and brakes(same as those) in a '38 Chevy and the LH Torry rack is just wrong..(Not my engineering I'm just improving)..BTW I have a VN 5 liter/700r4 and Commy diff with Commy brakes and I'm using a VN master/booster and it stops really nice...Goes well too just steers like shit...Cheers.
@motorfab
@motorfab 4 жыл бұрын
The front mounted torana racks are very tricky to get the geometry right, sometimes impossible, due to space confinement’s. My Ute has a VH commodore rack behind the XMember. The green wagon has a torana rack in front, the geometry is ok, but not great, it drives ok though. Slight bump steer, but good lock.
@xozindustries7451
@xozindustries7451 4 жыл бұрын
Can you move that center link for the steering closed to the crossmember to make more room for the oil pan?
@timothycarnazzola2683
@timothycarnazzola2683 4 жыл бұрын
Great channel mate love the content. Just a tip, when filming look directly at the lens, it will become more engaging with ur audience & not feel like ur talking to someone else haha.. keep it up mate!
@motorfab
@motorfab 4 жыл бұрын
Thank you. I’ve got a big pink dot next to the lens to remind me but I still keep forgetting. I’ll try to get it right for the next episode. Thanks for the support!
@1tarbaby1
@1tarbaby1 4 жыл бұрын
cross member vertical up weld, good to see a lot don`t do this.
@motorfab
@motorfab 4 жыл бұрын
Thank you, I’ll start doing more welding tips
@jimclarke1108
@jimclarke1108 4 жыл бұрын
I just subscribed, lets get it happening )))
@motorfab
@motorfab 4 жыл бұрын
Thanks for the support Jim, I know you’ve been around since the start!
@heathcarroll4692
@heathcarroll4692 4 жыл бұрын
Hey mate love the car cool build, don't mean to bash it but your statement about the painted steel isn't correct man don't listen to suppliers claiming its weld primer this couldn't be any more from the truth the solvents in the paint will cause inclusions and defects how do i know a number of ndt tests with and without weld primer and the results where clear shit don't work as it claims. Much cleaner and stronger weld to remove the paint... cheers Oh and grate work on using the tig over the shit mig welder grate to see quality over quantity. 👍
@motorfab
@motorfab 4 жыл бұрын
Thanks, it’s great to hear some testing backed results! I usually always preach clean steel is the best. But the painted stuff seems to weld clean and easily, but I’ve never tested it like you have.
@heathandsarah1
@heathandsarah1 4 жыл бұрын
@@motorfab it suprised me didn't think it would make a big difference. Anyways love the build and big block man, look forward to the next vid.
@STREETCARCULTURE
@STREETCARCULTURE 4 жыл бұрын
👌🏾
@michaelcullen8278
@michaelcullen8278 4 жыл бұрын
Just courious as to why the crossmember was all seperate pices and not v cut and bent.
@motorfab
@motorfab 4 жыл бұрын
Its a prototype, the productions ones will be bent up.
@pauledwards9416
@pauledwards9416 4 жыл бұрын
He says it’s a prototype
@thardenberg
@thardenberg 4 жыл бұрын
I like you channel but the speech sound could be better
@xozindustries7451
@xozindustries7451 4 жыл бұрын
You're shooting yourself in the foot if you don't install a rack and opinion, I'm sure you can find a column that will bolt to the floor. That header looks bad even with a rack in it, with that steering box it's gonna be a mess
@motorfab
@motorfab 4 жыл бұрын
I’ve done many racks on these cars, I’ve even got all the parts to do it, it’s more a time constraint.
@xozindustries7451
@xozindustries7451 4 жыл бұрын
Motor Fab Channel with this corona virus everyone has all the time in the world, no tracks to go to now anyways here in the US
@-MacCat-
@-MacCat- 4 жыл бұрын
I'd rather see you spend the money on the car than on a mic. The sound is OK, as you're not going for an Oscar. The big block is an obvious and correct choice. Get back to work 😉
@motorfab
@motorfab 4 жыл бұрын
Best comment! Thanks mate, really appreciate it!
@barryodorici2459
@barryodorici2459 4 жыл бұрын
Sort your sound out I'll come back
@motorfab
@motorfab 4 жыл бұрын
🎤 has arrived, bad sound will no longer be a problem. Thanks
@itsgerry
@itsgerry 4 жыл бұрын
Sorry couldn't watch your voice at 10 music at 2
@andreweisan9613
@andreweisan9613 4 жыл бұрын
your video goes from barely being able to hear you to music loud enough to wake the dead, either lose the music or change the record level, Like your channel from what I've seen just turn the music down
@garyhopkins6337
@garyhopkins6337 4 жыл бұрын
Can you turn that crappy music down.
@motorfab
@motorfab 4 жыл бұрын
The sound will be fixed for the next episode. As for music styles, it’s very hard to please everyone, but I’ll try to mix it up a bit for you. Thanks for your support.
Ep 12. HT Monaro, Junkyard build, 454 Chev, TH400, nitrous, Big Block
35:24
Ep. 14 I’ll show you how to make an old car stop like a modern car!
29:16
Trapped by the Machine, Saved by Kind Strangers! #shorts
00:21
Fabiosa Best Lifehacks
Рет қаралды 36 МЛН
The Singing Challenge #joker #Harriet Quinn
00:35
佐助与鸣人
Рет қаралды 31 МЛН
When u fight over the armrest
00:41
Adam W
Рет қаралды 24 МЛН
Ice Cream or Surprise Trip Around the World?
00:31
Hungry FAM
Рет қаралды 7 МЛН
Tough 540ci GTS Monaro street car
1:39
Fullboost
Рет қаралды 33 М.
Ep. 20 Junkyard Monaro,  SBE 454, 1000hp TH400 parts list.
22:37
Motor Fab Channel
Рет қаралды 15 М.
Ep 8. The junkyard HT Monaro is rolling!
17:58
Motor Fab Channel
Рет қаралды 10 М.
How to properly select a Camshaft
49:42
Myvintageiron7512
Рет қаралды 818 М.
Leaf Spring Suspension Secrets Unveiled
15:02
Motor Fab Channel
Рет қаралды 3,5 М.
The ultimate junkyard build revealed
17:10
Motor Fab Channel
Рет қаралды 4,1 М.
The Psychology of Psychopaths - Predators who Walk Among Us
13:44
Academy of Ideas
Рет қаралды 1,9 МЛН
Trapped by the Machine, Saved by Kind Strangers! #shorts
00:21
Fabiosa Best Lifehacks
Рет қаралды 36 МЛН