Ep19 CLASSIC FORD XE FALCON BACK ON THE ROAD AFTER YEARS OF BEING PARKED

IN THE FIRST EPISODE THAT THE XE WAS IN WE RESCUED IT FROM BEING ABANDONED ON A FARM IN A ROW OF OTHER CARS, WE GOT IT RUNNING AND DRIVING BUT THERE IS LITTLE ISSUES WITH CARS THAT HAVE SAT PARKED FOR SO LONG . IN THIS EPISODE WE SORT OUT SOME LITTLE STUFF AND ENCOUNTER SO BIG STUFF ALONG THE WAY. SHE'S NOW REGISTERED AND BACK ON THE ROAD AFTER WAY TOO MANY YEARS.
SO WHAT IS BACKSHED ALL ABOUT ?
WE ARE ALL ABOUT SAVING OLD CLASSIC CARS AND MODIFIYING SOME ALONG THE WAY TOO.
WE LOVE THE CLASSIC RESCUE , FIRST WASH ,FIRST START IN YEARS TYPE OF THING, GETTING OLD JUNK RUNNING AND DRIVING THEN PUT BACK ON THE ROAD AFTER YEARS OF BEING LEFT TO ROT IS WHAT WE DO.
IT DOESN'T MATTER IF YOUR INTO FORD , HOLDEN , CHEVY , BIG BLOCK SMALL BLOCK OR ANYTHING IN BETWEEN WE MIGHT HAVE A VIDEO FOR YOU TO WATCH. IVE HAVE AND HAVE HAD A LOT OF CARS INCLUDING XB COUPE , XY FACLON GT , EH HOLDEN , F100 , VB COMMODORE , HQ SEDAN AND WAGON , CORTINA , VALIANT AND SO MANY MORE SO THERE IS SOMETHING FOR EVERYONE. IN ON OF OUR VIDEOS I PRETTY MUCH WENT TO HEAVEN FINDING A WRECKING YARD / JUNKARD WHERE THERE WAS EVERYTHING YOU COULD DREAM OF INCLUDING A MONARO , CHARGER , VALIANT PACER , A FALCON COUPE , TORANA , CADILLAC , SOME CHEVY'S EVEN SOME JDM CARS LIKE DATSUN , NISSAN SKYLINE , MITSUBISHI SCORPION BUT IT DIDN'T STOP THERE EVEN 4X4 LIKE A HJ 45 TOYOTA LANDCRUISER AND A 60 SERIES WAGON . I REALLY HAVE NO BIAS I LOVE RESCUING THEM ALL SO DO STICK AROUND AS YOUR BOUND TO SEE SOMETHING YOU LIKE. CHEERS FOR TAKING THE TIME TO WATCH . MICK

[@backshed5295]

Please don’t forget to visit Backshed.net.au for merchandise.

[@coalfacechris1336]

No bullshit, - got two shirts for Christmas. Great quality. Get in there!

[@backshed5295]

@@coalfacechris1336 cheers mate and please don’t forget if ya talking cars with ya mates there is a QR code on the bottom of the shirts to get them on board mate ! Cheers 🍺👍

[@markc8602]

Love how you do everything in one video rather than a 10 part series like some of the other youtubers👌

[@backshed5295]

Thanks mate yeah I do try to give a end result. 🍺👍

[@jamiespinks3657]

Yes especially when a lot of KZbinrs often take months (& sometimes even 1 - 2 years) between uploading the next instalment of a build / restoration. I've even seen some that seem to abandon their viewers half way through a build series altogether.

[@steben01]

This is why I have favoured Mick's videos over now.

[@techmarc6996]

A 3/8" Center Punch, heated up (Very HOT) by Propane Torch will also melt perfectly circular seat bolt holes in Carpet. (If you don't have a Soldering Iron available.). Always good to have options!

[@backshed5295]

🍺🍺🍺

[@andrewg2618]

Love it. I've learnt so much from watching your videos. I have a couple of old Fords....a P6 LTD and an XF Ghia. I'm not mechanically minded by try to do as much as I can myself. Not just to save money, but it is satisfying when you resolve something yourself.

[@backshed5295]

Yep sometimes looking at what you achieved and just learnt is just the bonus after you’ve saved a $ or two. 🍺👍cheers andrew

[@daniellefko6527]

As we like your videos old cars never dies.

[@backshed5295]

Cheers mate 🍺

[@rossmuller9815]

Another good show at getting these survivors out and about. Like the self locating air cleaner around the 13.40 mark. (Ha). Your diagnostic skills are good. Keep 'em coming.

[@backshed5295]

Cheers mate and yep there’s heaps coming Ross 🍺👍

[@classicandclunker]

Great videos, Mick! Excellent to see this one develop. I have learned a lot about carbs from your explanations. To remove tint, I use a clothes steam wand to get it all off cleanly - but that's modern stuff, not sure about 80s tint..

[@backshed5295]

🍺🍺👍

[@andy00644]

The best thing for cleaning the sticky crap off the windows is actually eucalyptus oil.

[@rosswilliamsssvredline]

Great job on the falcon and love the bloopers

[@backshed5295]

Hahha cheers Ross 🍺🍺👍

[@Craig_Simpson]

Nice work, cant wait for the Cortina.

[@backshed5295]

Cheers Craig for watching mate 🍺👍

[@MichaelEales-bx5oc]

Hey just found you and been binge watching from the first episode. The old hot air paint stripper gun will help with the old window tint, any residual gum will come off with Eucalyptus Oil. on that point, any stickers/ pinstripe stickers will come off easy as, if you apply a couple of drops to the top edges and give it a minute or so to penetrate.

[@backshed5295]

Cheers mate🍺🍺👍

[@MrHarrow5]

Awesome mate. Can't wait for the video of mucas 9 inch. Troy Harrison wangaratta Victoria

[@backshed5295]

🍺👍

[@Andyc351]

She's a flash one with the fancy A/C centre console with the lid.

[@backshed5295]

Yep she is quite the flash model AC and power steering! Doesn’t get much better. 🍺👍

[@johncavar2914]

Your patience and understanding of the problem is impeccable....

[@backshed5295]

Thanks John 🍺👍

[@bartismoellis1052]

If you take a socket the size of the top of the valve spring and give it a good smack with a hammer the keepers will pop out but I do have to say your homemade tool did the trick.

[@backshed5295]

Haha I’ve seen a guy do that , and they popped out and went straight down the oil return holes into the sump hahaha 🤣🍺👍

[@jdjh38]

Another awesome episode great work mate!! Very informative and thorough for any viewer who is new to this!! Loving the old cars revived! I remember them brand new so to see them still alive is great!!

[@backshed5295]

Cheers mate thanks 🍺🍺👍

[@graemeburr6463]

This is great. Love the dry sense of humour . Wish I still had my XA 302 from back in the 80's (favourite Falcon). I drove XD's E's and F's and EL's as Police cars too as well as HQ to Z and a bunch of various Commodore models (NZ now retired).

[@backshed5295]

Cheers for watching Graeme 🍺👍

[@Binzy-jq2xq]

Gee wiz mate, I would have replaced all those stem seals while I had the rocker cover off. Great vid by the way brought back many memories for me 👍

[@backshed5295]

Hahah watch the next one mate I took your advice hahah Cheers for watching and please stick around as there’s heaps of new cars coming 🍺👍

[@adman6380]

Poor bugger copping all the interruptions, compressor, train, birds , great stuff as always

[@backshed5295]

Hahahaha nah it’s small issues mate they don’t worry me I just want you to be able to hear what’s going on , if I’m not filming I don’t hear them hahahah 🍺👍

[@davidlemottee2063]

I really enjoyed this video (once again). Great content and thank you for taking the time to explain what you are doing. Hope your channel grows and grows. Cant sing your praises high enough.

[@backshed5295]

Cheers mate and please share it around David 🍺👍

[@ADayInTheLifeOfJames]

When you lost that spring I was thinking poor bastard… we’ve all been there haha you’re a lot camper then me thought something like that happens 😂 great content again mate 👌

[@backshed5295]

Cheers mate 🍺👍new video up soon

[@kerrymulcahy8973]

Hey Michael great videos 👍 I’m learning so much, I just saw that wagon for sale on carsales in Victoria.

[@backshed5295]

Yeah i did see it up for sale mate🍺🍺👍

[@craigmartin7361]

My old boy & i were fixing push rods in the Xd Xes back in the 90s. 250 Cross flows are notorious for bending push rods. They are still some i his shed form 30 years ago Lol. Ps love your videos.

[@backshed5295]

🍺🍺

[@CJ-yb8uw]

Still hot.. brilliant 😎🇦🇺👍✌️

[@backshed5295]

🍺👍

[@erryberry4386]

Best car videographer guy ever instead of waiting weeks apart to see every 15 min video its all in one and i learnt heaps from these videos. Love the work

[@backshed5295]

Cheers mate I appreciate ya saying 🍺👍

[@deanroach_Roachy]

I really enjoyed this video as always but this one more as I’m a ford man myself and I’d love to see more older falcons saved from the scrap heap.

[@backshed5295]

Cheers Roachy We’ve got 3 falcons coming up mate , 63 XL Ute , 75 falcon 500 and a 75 v8 fairmont mate 🍺👍

[@deanroach_Roachy]

Thanks mate can’t wait I have been watching your videos now for a bit and really love the content keep up the great work.

[@backshed5295]

Cheers mate

[@steben01]

Love your wording with the carby bits. Half rooted and half rooted is fully rooted 😆

[@backshed5295]

Hahaha yep👍🍺

[@steben01]

@@backshed5295 Toolbox sticker there mate

[@backshed5295]

Half rooted x 2 = Fully rooted hahahha

[@damianjackson9084]

Such a great looking wagon

[@backshed5295]

Sweet patina . Cheers for watching Damien 🍺👍

[@damianjackson9084]

@@backshed5295 love those wheels such a good colour combo

[@phillburr1692]

Awesome episode bro That’s sound when the razor blade started scraping the window sent shivers up my back

[@backshed5295]

Hahha yep I hear ya mate Cheers for watching 🍺👍

[@peterscott7384]

So many one liners in this episode that could be bumper stickers. Crack me up. Thanks Mick for your dedication to cars, straight after night shift and straight into it. Awesome. 🍻

[@backshed5295]

Cheers mate Yeah we have a few bumper stickers available now mate Backshed.net.au 🍺🍺👍

[@raypayne2228]

Picking up an ‘83 XE Wagon today , keep the videos going on them!,

[@backshed5295]

Cheers Ray Good luck on ya wagon mate , this one has grown on me. 🍺👍

[@raypayne2228]

@@backshed5295 thanks mate, never had a big square falcon before so quite excited, it’s a very clean one too.

[@kendokunti]

good job mate and I hate corella's too!

[@backyardguru4604]

Well done Mick, a great watch as usual, keep up the awesome content

[@backshed5295]

Cheers mate 🍺🍺👍

[@Gavintaylor308]

Great watch mate. Just found ya. You beauty.

[@backshed5295]

Cheers mate Thanks for watching 🍺👍

[@georgeboukouvalas9781]

Good to see the old girl on the road!

[@backshed5295]

It sure is. 🍺👍

[@simongillfeather7590]

Your video's make me wish I hadn't sold my old Impala mate...I don't have anything old to work on anymore,sorta miss it..Great tips again Michael👊

[@backshed5295]

Cheers Simon and thanks for coming back again 🍺👍

[@jamesharvey1470]

Hi mate steam is the best way to remove tint ,I use a steamer that is meant for wallpaper removal

[@backshed5295]

Cheers mate I’ll remember that next car I’m doing it too Cheers James 🍺👍

[@67wogval]

Another great show bud 🍻

[@backshed5295]

🍺👍cheers mate

[@johncavar2914]

Thermo clutch fan ..brings back great memories...simple but great concept.

[@backshed5295]

🍺🍺

[@michaelsaville7485]

1/2 rooted + 1/2 rooted = fully rooted👍🤣 good job and thanks for the entertainment. compressor, birds and trains.......😂😂😂

[@steedsy71]

That's got Tshirt written all over it Mick!

[@backshed5295]

My pleasure mate 👍🍺

[@russelburton6497]

Thanks for saving the old XE Mick, I love the bloke stuff well done mate keep them coming and don't forget to turn off the compressor. Cheers RUSTY.

[@backshed5295]

Hahhaha thanks Rusty Cheers for watching mate 🍺👍

[@stevefleming356]

Great work she looks beautiful 👌

[@backshed5295]

She does mate thanks 🍺🍺👍

[@EnviXR81]

Fantastic episode. Good to see it with mates and can’t wait for Mucus to get its 9”

[@backshed5295]

Mucus is up very soon mate 🍺👍

[@4ndy530]

The Air Compressor is always the Boss! Good job bro, the XE looks great. The new carpet looks sweet! 👍

[@backshed5295]

F@#k the compressor hahahah 🍺👍👍

[@Brooksyscarrestorations]

Lol @ the F the compressor stickers!!

[@backshed5295]

Hahahha yep it’s becoming a thing Hahhaha Visit Backshed.net.au there’s a few good bumper stickers. 🍺👍

[@patelliott8724]

G'day Mick, I'm so glad that I stumbled across this video. I'm about to start restoring my wife's 85 XF Fairmont Ghia that has been in storage for many years. There is a little rust work here and there to be done before I start on the mechanical side of things. On the whole it's in pretty good condition but it will take some time to bring it back to its former glory. It's only done 178,000km so the motor should be ok. It needs the valve stem seals done and a set of welsh plugs that I know of but I'm sure there will be other things that pop up, that's why I'm going to remove the motor to work on it. How I wish I had a shed like yours to work in! Anyway, great video and I will now be watch more of them.

[@backshed5295]

Cheers Pat thanks for watching mate 🍺🍺👍

[@JAStheACE]

Gotta laugh with the tail end clips you put in, that's a pissa! Doin well Mick, the wagoon fought you for a bit, but you got there. Enjoying the content mate and the shirts are awesome!! Cheers, Jas'

[@backshed5295]

Yeah thanks Jas And thanks for your merchandise order mate . 🍺👍

[@JAStheACE]

@@backshed5295 no probs mate, gotta help you out somehow. and i like being a tad different than others too.

[@mikegreening2574]

Hey mick steam works well to get rid of tint no need for a razor blade ! Love ya vids mate

[@backshed5295]

Cheers mate I’ll keep that in mind for next time 🍺👍

[@joblo4216]

that car has a killer surfy vibe,put the racks on it and the old school lacquered long board on it,wow you got it going on,the white rims are mad for the vibe,good job

[@backshed5295]

Cheers mate and yep I hear ya Take a look at the previous episode the xe was in and you will see exactly that ! A board on its roof rack! 🍺👍

[@brucehayes7251]

After the horse has bolted Mick but I've had a bit of success with a hairdryer and warm water to soften up the old tint film. Couldn't see out of my ute window. All the best,love your work

[@backshed5295]

Cheers mate I’ll give that a go if it comes up again, you never know what I’ll get haha 🍺🍺👍

[@lodestone69]

Another great episode Mick! Keep up the great work. Look forward to seeing Mucus and your other projects.

[@backshed5295]

Cheers mate Yeah stick around mate there’s heaps coming and Mucus is back soon. Not sure why but I do love that shitty Hq hahhhaha. 🍺👍

[@evanboubouka3031]

God damn, I love this car! I have a soft spot for XE Wagons, as it was the first car i drove. We had an XE Fairmont with column auto bench seat as the first family bus. I'd kill to own one myself!

[@backshed5295]

This one has grown on me mate i really do like the look of it alot. 🍺🍺👍

[@nickgalea82]

Bloody hell that's a good looking car. The steelies with the centre caps look mint.

[@backshed5295]

Yeah I do like it a lot too mate 🍺👍

[@GGBURGER1]

Happy to see this! 🤠

[@backshed5295]

Cheers mate 🍺🍺👍

[@bobkelaher5841]

Awesome to meet you today and talk cars and about your channel. Thanks for the beer and keep the great content coming.

[@backshed5295]

Sorry I missed saying see ya later when ya left Bob and you made my day maté honestly ya did. Made the effort feel worthwhile.🍺🍺👍 cheers mate

[@backshed5295]

Hey Bob how good was that beach view today! 🍺🍺

[@bobkelaher5841]

Great view for sure. It made my day meeting you, my wife was telling everybody when we got home. I didn’t want to disturb your family time anymore so didn’t say bye. I definitely could have a few beers with you and talk cars and other shit.

[@backshed5295]

Anytime mate 🍺👍

[@Trifiveguy]

I’ll be watching tonight mate

[@backshed5295]

Cheers mate 🍺🍺👍

[@backshed5295]

You still in the states or over here now?

[@Trifiveguy]

@@backshed5295 packing my suit case now mate !! Leaving Sun morning

[@vigilante351]

Sensational episode man, perfect process of elimination with the carb. Really kept me entertained, as this is the era of car I've been working on for years and years. Soldering iron on the carpet tip... Why didn't I think about that haha... Screwdrivers down the centre usually. But that would be perfect

[@backshed5295]

Cheers mate thanks for watching bud 🍺🍺👍

[@tonykluytmans5336]

Love it, nice work Mick👍

[@backshed5295]

Cheers mate 🍺👍

[@grahambirt6004]

hi i just found your channel by chance and im glad i did ,very entertaining and informative and down to earth ,plus an ozzie working on ozzie cars

[@backshed5295]

Cheers Graham I’m glad you found us too. 🍺🍺👍

[@shanedavies9564]

Nice Mick if you want a easy peel of in the future for glue etc use crc peel off mate , citrus based spray on , bloody awesome mate ,as a painter ,/ sprayer works a treat bud , keep the vids flowing , cheers , shaneo, nelson, nz, 👍🍺🐕

[@backshed5295]

Hey Shaneo welcome back mate Thanks I’ll keep that in mind No doubt I’ll be removing tint from something else soonish. Cheer once again mate 🍺👍

[@birdie399]

Top work again, especially making a custom tool. That car looks and sounds like success. Thanks for the video.

[@backshed5295]

Your more than welcome mate I appreciate ya watching and taking time to comment Cheers 🍺👍

[@donaldhalls2189]

If their used regularly they run better, I have a XF S pack got sick of the air flow meter, so changed it to Mass Air Flow meter, changed the temperature sensor for it to run leaner, thanks for sharing, hope you had a great Christmas and wishing you and your loved ones a great and prosperous New Year

[@backshed5295]

Cheers Donald 🍺👍

[@change_your_oil_regularly4287]

The blocks! 🤣

[@backshed5295]

I’m not sure I follow mate but thanks for watching. 🍺👍

[@change_your_oil_regularly4287]

@@backshed5295 on the accelerator

[@backshed5295]

Ah yeah I get ya now , I’m a bit thick. Yep they were an eye opener. 🍺👍

[@NoNameneeded1984]

Ha Mick! You remind me of early days on Vice Grip Garage. Informative, funny and you show your mistakes. The best bit though is it's all Aussie. Those XE's were solid runners.. Well except mine had a tendency to lose the rear brakes😝

[@backshed5295]

Cheers mate I appreciate ya saying. 🍺🍺👍

[@scott.t1714]

She came up grouse man rippa job on the spring compressor took she worked a treat love the long video carnt wait for the next cheers

[@backshed5295]

Won’t be long mate I’m busting arse on the HQ wagon right now 🍺👍

[@scott.t1714]

Sweet your a hard worker man

[@backshed5295]

I do get busy mate but if ya love what ya doing it doesn’t seem so hard and then I get cool people saying great stuff about my cars and videos and it seems even less hard and more worth the effort mate Hahha I guess what I’m saying is thanks for watching and commenting because I’m enjoying it too brother. 🍺👍

[@simonbull473]

Another great episode Mick I like how thorough u are at explaining the little things. Look forward to seeing what u do with the two Q’s. 👌

[@backshed5295]

Working on 1 right as I send this message mate. Up next ! 🍺🍺👍

[@serbsavic8774]

Making your own tools and all love your work mate👍

[@backshed5295]

Cheers mate 🍺👍

[@noelgibson5956]

Maybe install a fully worked 2 litre four out of a TE Cortina for improved economy, better handling, and a sporty sound?😉

[@backshed5295]

Hahahah maybe not. 302 or 351 Clevo I’m guessing.🍺👍

[@noelgibson5956]

@@backshed5295 🤣👍

[@michaelguerreiro3300]

The XE is looking good can't wait for EK thought!!

[@backshed5295]

Not long now mate 🍺👍

[@johncavar2914]

Master blaster guru 👌🐝

[@backshed5295]

I do love a good pressure cleaning day 🍺🍺👍

[@jasonmackenzie3602]

Hi Mick..Love the videos mate..Got an idea for another sticker for ya..Stop Talking Get Into It!!..You give me inspiration to do work on my cars (8)..Keep em coming

[@backshed5295]

Hahha we’ve got that sticker already Backshed.net.au cheers mate🍺👍

[@jasonmackenzie3602]

No worries, I've only been watching for about a month..Been of work for the last year (all good)..I've actually stopped working on the house and been getting stuck into the cars since watching the show..Oh and you are actually the first person I have ever sent a comment to..On any platform,I'm a 75 model..I'll have a look at the site

[@backshed5295]

Well cheers mate for taking the time to message mate I do appreciate it🍺🍺👍

[@markmathews206]

Love your work 👍👍🍺🍺

[@backshed5295]

Cheers mate 🍺👍

[@roberttatnell4991]

Like your cars you are a classic. Very entertaining. Cheers

[@backshed5295]

Thanks Robert I appreciate ya saying mate 🍺🍺👍

[@ianarmstrong8826]

Best one yet Mick really enjoyed it.

[@backshed5295]

Cheers mate I appreciate it 🍺🍺👍

[@aaronrear5525]

Awesome mate👍

[@backshed5295]

Cheers Aaron 🍺👍

[@pgilb70]

They are very good, long lasting cars. Had an XE on gas with 300k on it. Was tops.

[@backshed5295]

Solid ol girls ! I’m enjoying driving it. 🍺👍 cheers for watching

[@deanwharepapa8561]

Great work mate 👍

[@backshed5295]

Cheers Dean 🍺🍺👍

[@brianboys9015]

Very enjoyable

[@backshed5295]

🍺👍

[@aussieautospeedaas275]

Been waiting for your vids, bloody love them. Keep smashing it. 👍

[@backshed5295]

Cheers mate 🍺🍺👍

[@minidiggerman]

Sorry mate missed all that profanity about the seat bolts there seemed to be this annoying beeping sound all the way through but I’m sure there are some names in there I have called myself many many times lol. Well done again Mick. Now off to the backshed shop I go Until next time cheers.

[@backshed5295]

Hahha thanks for coming back mate And thankyou if you go the the shop your support will be greatly appreciated 🍺🍺👍

[@flynnpreston5337]

Great vid mate! Keep up the great work! It’s funny I was getting my xp ready for roadworthy last month after sitting in the shed for 20 years and had it all ready then same thing happened started it up and it was missing. Damn bent pushrod except I had to take the head off it was that stuck I even pre oiled everything before the first start! Least I don’t have to do any body work on it because she’s mint!

[@backshed5295]

They can test ya mate 🍺🍺👍

[@tonygeorgievski4746]

Good work Mate keep it up

[@backshed5295]

Heaps more coming Tony 🍺👍

[@johncavar2914]

Fantastic content, vehicle restorer, not many like it ..out there !

[@backshed5295]

Cheers mate 🍺👍

[@julianalderson3938]

Just in good shape. Thanx

[@backshed5295]

Cheers mate 🍺👍

[@dalewyatt1321]

Great to see another vid. Not a fan of those Fords but that looks like a bought one now, stunning job. I'll have a sticky nose at your web site soon.

[@backshed5295]

Cheers mate thanks 🍺👍

[@garybrown4671]

The birds sound different there. It sounds like they are amused at your struggles.

[@backshed5295]

Yeah I sometimes think they are laughing at me hahah 🍺👍

[@mr33spitnbarz28]

Love the vids mate

[@backshed5295]

Cheers mate 🍺👍

[@williambremner862]

Love your videos mate. Haven't seen a bad one yet. F***ing birds 🐦

[@backshed5295]

Hahahha yep they test me 🍺👍

[@bill13690]

Great video there mate. I have been watching a lot of these episodes but I'm sorry if I haven't got around to messaging your KZbin channel lately I have been meaning to " been a bit slack. I have been really enjoying all of your contents on the recent kasbah tickly that you have purchased and will continue supporting your channel - Cheers from William " Mount Gambier - South Australia 🇦🇺 👍

[@bill13690]

Sorry I am having Google audio text errors ( particularly with your recent vehicle purchases )

[@backshed5295]

Hahah cheers mate for watching 🍺👍

[@brucemelton4983]

Hey Mick, awesome video mate , keep it up!

[@backshed5295]

Cheers Bruce 🍺👍

[@uprvin_vl]

My new favourite equation. Half fck’d + half fck’d = full fck’d. love the vids keep ‘em coming

[@backshed5295]

Hahaha cheers mate 🍺👍

[@Badassclown]

👍

[@backshed5295]

🍺👍

[@johncavar2914]

It's an XE 🤗lol XC or XD .. regardless all great 👍 Falcons in their day 💞

[@backshed5295]

🍺👍

[@raelock598]

Can't wait for the hq wagon and what you are going to do to it

[@backshed5295]

I’m half done on it mate you won’t be waiting long. 🍺🍺👍

[@andrestroncoso9672]

Great video mate. (Tranie) you can’t say anything these day 😅

[@backshed5295]

Hahaha yep I thought someone might get a kick out of that one . 🍺🍺👍

[@stevefairchild3337]

Good stuff, had an AMC eagle I did upper ball joints, unfortunately. These had rivets a serious torch was needed. Got through it. When putting air to carb after spraying with carb spray, wear glasses, that shit burns. How often do you guys have take a car thru rego. I suspect that's the sane as our safety inspections. I have 2 vehicles I am putting antique plates on them, 74 satellite and my daily 92 dodge d150. In doing this I won't have to go through inspections again. But I will have limited driving. Love watching your stuff, I did pass your show along to some of my motor head friends. I have experienced a spring taking of, it suckks.

[@backshed5295]

Cheers mate Inspection every year over here mate I was only a bit apprehensive because she had been sitting for so many years 🍺🍺👍

[@SOBER189]

Hey mate only just stumbled across your channel,enjoy the way you show the process of getting an old girl cruising on the road again and Giving me motivation. Question: what size are the steelies and can you get them for old Holden? Would look good on my fb

[@backshed5295]

Hey Shane thanks for finding us mate . Those wheels are 15x7 and 8 on the rear . Google Bci wheels for the different stud pattern mate . 🍺👍

[@SOBER189]

@@backshed5295 cheers mate.

[@steben01]

Get a remote mic Mick. Make easier to here when out and about

[@backshed5295]

Yeah I do need to do something like that mate👍🍺

[@pentergraph]

Hey mate, seeing that rail line and landscape I assume you are out near Scone? Maybe Aberdeen or Togar?

[@backshed5295]

Yeah that’s right mate🍺🍺👍

[@dave4803]

Looks a lot like a 1980's Ford Granada.

[@backshed5295]

There is quite a few of our cars out here with heritage/ similarities to your cars in the US . 🍺👍

[@dave4803]

@@backshed5295 I live in the UK, common mistake though. The US has one like it too.

[@backshed5295]

Ah sorry mate . Yep similar cars there too A few you will recognize coming up soon , 1975 TC Cortina and a Holden commodore that I think you guys had as an Opel

[@dave4803]

@@backshed5295 No problem, happens all the time. Europe had them branded as Opel, in the UK they are branded as Vauxhall. We only had three cars branded as Opel in the UK Opel kadett Opel monza and the Opel manta, that was in the 70's and 80's. I remember the Cortina, saw loads when I was kid, I think everyone in my family had owned one at some point. The Holden vxr8 is a fave of mine and one of the few modern cars I like.