Epever Tracer MPPT solar charge controller physical setup

This is what the Epever Tracer AN2210 physical connections and a quick look at the PC monitoring screen.
I will include a video of the software if there is enough demand.
If you want to see the video of how the stands were built, check out this video:
• $20 DIY Solar Panel an...

[@brentacusmaximus6677]

Just bought the 40amp version of this and hopping all goes well. Saving up for a couple of crazy priced 100ah Brattleborn lithium batterys.

[@Farmer2492]

Hi Great video would you recommend the EPever, i can buy a EPever tracer solar controller with the MT50 its just on brand new he wants $170 we are in Australia, what i have is a 300 watt fixed solar panel and 2 x 100ah AGM batteries would a 30amp or 40 amp be better as the one for sale is a 40 amp thank you

[@12vLife]

Can this be configured to charge a 155AH 12v deep cycle AGM at this rate: Bulk charging voltage: 14.5V-14.9V; Float charging voltage: 13.5V-13.8V?

[@MTMountainMan5411]

Where do you find the program/app for your computer to monitor the solar activity/input that you showed on your laptop? Thanks for sharing.

[@Seniortoscratch]

That’s a good question. I’m going to fire it up again this weekend and I’ll let you know

[@jimgresham5529]

Bought this controller and should deliver today. What gauge wire do you have from battery to controller ?

[@Seniortoscratch]

All of the cables were 10 AWG

[@brucegordon3566]

Good video First time I saw a fuse.what about a disconnect thanth

[@raymondshattucks3634]

I have the same mppt change controller my 20 ams ....how meny 100 soler panel can I use linking then up to how meny 100w pannles ,?

[@Seniortoscratch]

I wouldn’t do more than 200W, based on P=IV; at 12V, 200W would get you to 17A

[@curtismay3695]

I have the tracer 1210 controller, I am new to solar. I wondering what to do with the load terminals on my controller. I noticed yours are not connected so what are they for?

[@Seniortoscratch]

That’s if you want to connect power consumers directly to the controller. Since my battery is what is supplying power to my trailer, the power is managed through my trailer’s converter

[@Prowlerook]

load is for small LED lights not for heavy amp/watt use

[@wisalahmad1867]

Please make a video about controller sittings and parameters. I bought new but don’t know it’s sitting,

[@Seniortoscratch]

I didn’t need to use the solar this year because we were hooked to the utility, but next season I will show them!

[@dixy2406]

Hi I have the 20 amp version I have 2 100 watt solar panels can I wire them in series to charge my 12 volt batteries or will the mppt kick out 24v?? Thanks

[@Prowlerook]

yes you can I have 4 100 watt series just never go above 100 volts no matter what array you use.

[@r59wings]

No Earth cable bud? Is it not needed on these?

[@Seniortoscratch]

Not needed in this setup. There is a temperature cable attached which allows the controller to adjust for ambient temperatures

[@muhammadabbas6782]

Price?

[@Seniortoscratch]

$125 on Amazon.ca

[@tulipsmoran5197]

Get a microphone, sounds like you're talking into your mitten

[@Seniortoscratch]

My bad. I was mainly doing this do document for myself. I will definitely do the next video with a mic