EPIC AIRGUNS - How to fine tune Epic ONE & Epic TWO

[@pelletshoter]

simply and clearly explained I think that no one will have problems with setting up their Epic airguns now 👌

[@elhuervo6069]

Very informative info, thanks for putting out better and better content!

[@grantwells120]

Thank you.....a great help when tuning for different ammo 👍🙂

[@rangur1]

Love your products.

[@dutchmetalmaniac]

i think i have to buy one now. great setup with the regulator screwing up or down without problems. i like it.

[@TripleGRogerLait]

Great video and great explanation. 👍👍

[@fodzy974]

I have already find this solution with your epic and it's work to for other brands with hammer. Good vidéos thanks a lot

[@lancsvermincontrol]

Really good to know as I'm going to be testing soon.

[@JohnVentarino-ey5ln]

Excellant video my friend you know your stuff buddy.

[@peashooter950]

Okay reporting back. I can actually completely unscrew the HS adjuster in the two using a 1 mm L shape hex key to adjust. And back there with the adjuster just engaged in the thread with 2 revolutions or so, i do not get the valve to activate not even with 60 BAR on the regulator. So it would seem i have NOT been backed all the way out, on the two sitting behind the rifle it is not possible to see regulator screw, so working by feel / chronograph. I feel with 3-4 mm of the adjuster thread visible you adjust you are all the way back to get 0 speed with 60 BAR regulator. ( stock removed ) To prevent doubt i have written reg pressure and speed on some of the most popular ammo i use ( putting a sticker on the bottom of the screw lid tins i have ammo in, on the top is ammo model and weight ) Quick session today in living room ( 700 mm .177 / 4.5 mm Two ) 10 gr JSB KO MK3 slugs - 60 BAR regulator = 980 fps 13.43 gr MRD pellets - 60 BAR regulator = 865 fps 13 gr Zan slugs - 80 BAR regulator = 980 fps IMO Epic should have a cheat sheet for different length barrel / caliber / Ammo, though i also have to admit following this guide it is not hard to tune your rifle if you know what kind of speed is good for your Ammo. This would be a god sent for newbies. Hammer adjuster grub screw / click ball now secured and it should not move. LOVE shooting my Two 🥰 And good weather window in regard to wind in the days to come. ( good thing i have heated shed to shoot from ) When i hit 1 year of Two ownership i guestimate i will have +60,000 shots on the rifle ( i shoot a lot not least in the summer )

[@peashooter950]

I am not quite sure. But in the Two backing the hammer spring adjuster all the way back ( with a 1 mm hex L shape key ) i think the valve still open on my 700 mm / 4.5 mm rifle. At least with very low REG pressure in order to be able to shoot light ( 10 grain ) pellets and not shoot them way too fast, but maybe a higher REG pressure and lighter hammer hit. Actually i have lately started with the HS fully to the back, CUZ the bump stop O-ring ( # 276406 ) in the valve i have damaged 2 times now, and i think it might be from too much hammer. I will for sure try this tomorrow with the chrono in my living room. I will reply again tomorrow after my testing in the living room. BTW A observation. The grub screw + spring + ball that engage on the hammer spring adjuster on my Two, it have a tendency to come loose / back out, and so i loose the clicks on the adjustment, no big problem though i can easy make the grub screw travle less easy with out fully locking it in place. PS: i wish i could try the One, but not even a chance of holding one here in Dernmark.

[@FodzyleGEEK]

Really great vidéo ! Already done before your vidéo on my Epic one 700mm LW in .25. Really good résults with .250 and .253. Hope to see you again this year AT thé IWA in Nuremberg ?

[@epicairguns]

You are always welcomed!

[@creitec6578]

Is there just one spring and one hammer weight for all power models or does the .25 cal with long barrel have heavier and stronger spring/hammer weight?

[@epicairguns]

Epic TWO has the same hammer and spring for all variants. Same with Epic ONE. The only difference is just between the E1 and E2 models where the E1 is fitted with heavier hammer and stronger hammer spring.

[@creitec6578]

@ thank you for the answer. I was wondering because the hammer spring adjuster seemed almost all the way in at just 130 bars and didn’t sound that it was opening the valve fully. I also saw the video where you had over 200 bar reg pressure and ask myself if the same weight and spring will open 220 bars or 200 bars for example

[@epicairguns]

​@@creitec6578 It is just a bad angle of the camera. When we are showing getting lower from 155 BARs, the hammer spring is actually overtightened for this (it was just to show the principle of how it works). We will make more videos of shooting and everything what affect the accuracy so hopefully it will be also helpfull. This was just the basic explanation because we have some shooters who do not know how to operate the rifle and this is one the of most important point to get some good results.

[@creitec6578]

@ totally right 💪🏻 thank you for explaining and your videos/time!