Thank you for your video on Generator Boxes Inc. Just received ours for our Westinghouse 4500DF. Fits like a glove. We had 2 champion 2000 portable units that I had to take of a rear rack of our 5th wheel every time I wanted connect them together. The only time I will need to touch the generator is to add gas. Thanks Bob T
@ramblingonrv22523 жыл бұрын
Bob: you are very welcome I’m glad it worked out for you. That is what our community is all about. And as we continue to grow, comments like yours and any additional input you would like to give is what will make us the happiest. Thank you for watching.
@DJ-3551-12 жыл бұрын
Mr. Bob what model generator box did you go with for the westinghouse 4500df, i have the same generator and am looking to mount it on the bumper.
@johnr55452 жыл бұрын
Nice job god bless
@ramblingonrv22522 жыл бұрын
Thank you
@robinkelly64842 жыл бұрын
Great video. Just what I am looking for for my Champion 4500. Question, do you have a link to that exhaust kit on there? I can't seem to find it on amazon
@ramblingonrv22522 жыл бұрын
Hi Robin. Let me see if I can find that link. Thank you for watching.
Is it loud inside the trailer? I would think the vibration would transfer to the trailer while running.
@ramblingonrv22522 жыл бұрын
It wasn’t that bad. Not any worse than others I’ve had.
@deborahbrebner12373 жыл бұрын
I have tried to find this company online or even search in Lake Havasu AZ and no luck. Can you provide the info about this company? Thanks
@ramblingonrv22523 жыл бұрын
Hello Deborah: it is now called KSH Fuel Products. It is located in Lake Havasu. Thank you for watching our channel, and please let me know how this works out for you.
@nathanurick83203 жыл бұрын
That’s a good design but I’m curious about how much weight you have hanging there. I want something similar to that so I can run my duel fuel champion back there instead of under my bed in the front
@ramblingonrv22523 жыл бұрын
Hi Nathan: with box and my two champion inverters, and it comes in at about 200 pounds. The bumper is rated at 200 pounds of weight, and they did weld some bracing but I do not believe it’s welded to the frame at all. I have had no sagging, I know I have been using it for over a year. All seems to be doing well. I don’t put anything back there other than the two inverters.
@marcushennings95133 жыл бұрын
Great design, instead of making removable access doors I would have tacked small hinges so they can be propped open at the bottom to keep the inside drier during rain storms
@nae4793 жыл бұрын
Hi. Where did you buy the exhaust extension and how much? I can't find it on amazon. Thank you.
@ramblingonrv22523 жыл бұрын
Hello: I will look for you and get back to you, however the most expensive part was the carbon fiber exhaust tube. The actual brass extension was not that expensive. I think all in it was about $100 but 90% of that was the tube. Thank you for watching our videos and I will respond with more information as soon as I can look it up.
@ramblingonrv22523 жыл бұрын
GenExhaust for Champion 3500/3200W & 3100/2800W Inverter Generator 1" Silicon... www.amazon.com/dp/B07HBC6SVX/ref=cm_sw_r_sms_api_glc_fabc_h2JdGbKY05Q48 Please try this link from Amazon.
@tintladyusa4 жыл бұрын
Power!!!
@daviddnelson2 жыл бұрын
How did you mount it?
@ramblingonrv22522 жыл бұрын
Hi Dave: they mounted it to the frame with bolts. They also threw bolted on the bumper. It’s solid as a rock
@donaldthomason45883 жыл бұрын
Great review. Question, did you have to reinforced the rear bumper?
@ramblingonrv22523 жыл бұрын
The bumper is rated to hold 200 pounds. The box and two inverters weigh about 150 pounds. So no we did not reinforce it at all. Thank you for watching we appreciate your comment.
@Foxboss93 жыл бұрын
Heads up... Just 1 Champion weighs in at 75(pull start) to 110lb(electric start)... Just be cautious.. 👍
@ramblingonrv22523 жыл бұрын
@@Foxboss9 That’s really good to know that the electric start weighs that much more. I didn’t even think about the possible difference in weight. I truly appreciate your comment and I know everyone on the channel will too. Thank you.
@davebrown82823 жыл бұрын
Hello there, I am putting together a box for my Champion 3100. I looked up the exhaust link that you posted, however I only see the flange and the silicone tube I would like to find the quick connect. Can you provide that info?
@ramblingonrv22523 жыл бұрын
Hi Dave: check this out. GenExhaust for Champion 3500/3200W and 3100/2800W Inv... www.amazon.com/dp/B07HBCY3N3/ref=cm_sw_r_sms_awdb_imm_t1_G2WWR3JH8MQ13WJ53R68 Thank you for watching!
@davebrown82823 жыл бұрын
@@ramblingonrv2252 Thank you. Happy safe travels!
@davebrown82823 жыл бұрын
Also wanted to ask about the insulation you used.
@ramblingonrv22523 жыл бұрын
@@davebrown8282 Hi: that is standard automotive installation. We picked that up at AutoZone. We also use it inside the camper to provide black out for a couple of our windows. We just put it in behind the blinds.
@ramblingonrv22523 жыл бұрын
Thank you. Safe travels to you as well. Thank you for watching.