Episode 2... The Svarog Botfly!

Now let's take a look at the Botfly folks! This is 1 of my favorites... and at 1 oz. total weight there are lot's of possibilities here. Important links below!
Click on the link below to get 10% off of your total order with Marty’s Molds: www.martysarms...
Enter discount code ‘BRO2020’ for 11% off at Svarog Bullet molds: en.svaroghunt.ru/
/ bubbarountreeoutdoors
My Patriot Supply: www.preparewith...
www.bubbarountr...
www.kicks-ind.com
www.ballisticpr...
leeprecision.com/
www.precisionr...
www.truglo.com
www.osceolahat...

[@ThatPNWGuy2024]

Don’t them chickens know you’re recording a video??? Hahah.. Thanks as always for a great video

[@saltcreekammo]

Adds character to the video!

[@BubbaRountreeOutdoors]

those crazy birds are always trying to get in the videos!!

[@raybates6254]

The core pins from the zifferboy mold will fit this mold as well !!

[@robertfrapples2472]

After owning a few Svarog molds, I've found that they are actually kind of fragile. If you smack the sprue cutter open with a mallet, you will wind up with a stripped out bolt hole soon enough. The bolt that holds the sprue plate on is too short. After my first one failed I used a longer bolt for a while, that would grip a few extra threads, but it also wore out after a couple hundred pours. On two of my Svarog molds, I have drilled and tapped new holes for the sprue plate, using a full inch long bolt for the one that holds the plate on. I have over 5000 pours on the repaired molds, and they are still going strong. The core pins are a whole other issue. Keep the screw at the bottom snug, or you will be sorry. If you want your Svarog molds to last, don't use a mallet on them at all when you don't have to. Open the sprue plate with the push of a gloved hand. All that being said, these make some of the best slugs on the planet.

[@michaelrandell4021]

I found that if you keep the pot full, and temp on the Lee almost 0n 8 setting the more it fills out the bands. Used 20 matches and smoked the hell out of the mold. More the better.

[@johnparrish9215]

I've got some Silver Laced Wyandottes and they are pretty mellow, however, the Guinea Fowl that I have for tick control make up the difference. Love my birds, I take care of them and they take care of me.

[@BubbaRountreeOutdoors]

We had a big flock of the hooded Guinea's several years ago... best feathered watch-dogs on the planet ain't they John!!

[@johnparrish9215]

@@BubbaRountreeOutdoors Add a few big white Geese with them and you'll never have any visitors at all...LOL

[@carlubambi5541]

great video as always .I used to work in a pewter and lead casting facility and used to cast some it's by hand and by centrifugal casting machine .When I used to cast in molds .We had to heat the molds and turn up the heat on the pot to get to a good form mold temp and it took time to cool down and if it wasn't enough lead it would shrink enough to cause problems

[@ftargr]

I remember the old poultry videos

[@tapeshwarsingh646]

Big fan of yours from 🇮🇳India. Your video help us to improve the accuracy of shot guns and their loads.

[@leehaynie1796]

I love the background noise.

[@dontblink2782]

Interesting. Like Ryan's @ Goodell Shotshell, my Botfly mold and slugs by Svarog is just a huge hollow point with no segments.

[@dontblink2782]

I stand corrected. I went and grabbed the box, I haven't cast any yet, and mine is segmented. Fortune Cookie stated the pins are interchangeable between the molds, so that must be how Ryan made an unsegmented Botfly monolith hollow point. The same way that Fortune Cookie made his 800gr "Super" Paradox.

[@michaelrandell4021]

Just waiting for the Carlson rifled choke tube to come in.

[@vernonmcnuttjr.1301]

Wow , that is amazing what slugs do ..

[@kylefraga5550]

Getting all fancy with the intros now ha, great video as always. 👍

[@maxpinson5002]

Nice Thanks for the great video and sharing the information I could tell you either had some fresh eggs, or the hens were sampling some hot sprues

[@raybates6254]

I usually put my molds on top of the melter so it heats up as the lead is melting !

[@clarenceray6597]

I love your videos please keep them coming thanks

[@BubbaRountreeOutdoors]

thanks Clarence...

[@clarenceray6597]

Thanks I really like your videos no joke I been reloading the the wal mart sinker can't get any buck shot here in ky or slug we got to load them. Thank you help

[@scamp7441]

It sure seems like 30 grains of Longshot is the sweet spot for that one.

[@bigracer3867]

Getting lead is my problem sadly. Shops using zink and steel weights now.

[@NomadicHacker.]

Looking good

[@ralstonraz]

Wow...

[@paulellis4467]

Awesome video as usual wade thank you!! Keep up the great job!!where can I got those botfly molds ?? They seem very accurate . God bless you and your family

[@Maddad_39]

I have the 4 petal and straight hollow point pins for my mold, still trying to get another mold and a set of all petal pins. Where did you get the mold in this cazy era? Or have you had it a while and are just now using it? Love your channel Wade bless you brother👍

[@ThatPNWGuy2024]

Order direct from their website.

[@BubbaRountreeOutdoors]

www.svaroghunt.ru/

[@Maddad_39]

@@BubbaRountreeOutdoors thanks Wade!

[@gorillamotors]

which of the Svarog bullet molds are similar to the twister the other Russian bullet mold maker makes?

[@johnbailey9682]

Dinner on legs yup chicken dinner .

[@michaelhedgepeth5106]

Good stuff! Now it leaves Me with a little ol' problem though🤔.... Where/How am I gonna get Me a couple or 2oe3 dozens❓

[@codyjarreau9847]

Love the video. Id like to see you shoot some big water jugs with these and the after math on a dead deer this coming season. They look pretty nasty.

[@jstsmegy]

Paradox paradox paradox !!! Lol

[@vdog4799]

I say it's MY Shotgun and I'll put a scope on it if I want to! If they don't like it,they don't have to do it to theirs. Land of the FREE for a reason👍

[@g.k.dalton4530]

I’ve found out that those mold run really hot as well.. took me about 10 or so to figure that out lol.

[@BubbaRountreeOutdoors]

gotta be screamin' hot for sure!

[@jstsmegy]

Grateful thank you - question do you find the sprue plate doesn’t not make a clean cut?

[@BubbaRountreeOutdoors]

so far all of mine make clean cuts!

[@mrhamburger6936]

You can't get ahold of these casting molds now

[@eugene7890]

Why I just got some. It took like 3 months to get them but I did get them.

[@chuckfinley3152]

I saw full lead taco uses a hot plate to preheat his molds, have you tried that?

[@BubbaRountreeOutdoors]

not yet Chuck! but it won't be long and all I'll have to do is leave em out on the table in the sun!!

[@chuckfinley3152]

@@BubbaRountreeOutdoors I can feel the humidity already lol

[@joelmcmahan7386]

Saving BRO, my empty hulls got 3.5, 3 and 2.75. Get up a few more before I mail them. Do BRO have email or something I can get an address from. Gods speed to BRO crew, friends, fans and family. 👍🇺🇸

[@BubbaRountreeOutdoors]

hey Joel! Just contact me thru my website: www.BubbaRountreeOutdoors.com

[@ClarkesonTheMarksman]

They look sick as f^^k

[@1984wasthebestyear]

What kind of Red dot are you using?

[@BubbaRountreeOutdoors]

I use a TruGlo Triton Michael...

[@brucelewis1017]

What temperature do you run you pot at

[@BubbaRountreeOutdoors]

I run mine at 7 to 7.5 Bruce

[@1LRLRG]

Does the screw make a lot of difference?

[@BubbaRountreeOutdoors]

for me it has made a lot of difference! It may not if you're shooting out of a rifled barrel.

[@dannyray8159]

Who makes the rifled chock tube?

[@BubbaRountreeOutdoors]

The only ones that I have seen available now are made by Carlson. Mine is an old Beretta Mobil tube that I've had for years.

[@michaelrandell4021]

CARLSON for rifled choke tubes.