Pure lead Ball vrs Hard cast! Part 2

[@tomgoodwin9161]

Another outstanding video. Pure lead was what I wanted to see the results of. Pure lead imparts the most shock to a flesh and blood target. Very well done and informative.

[@alltree78]

I would like to see a 3 inch, 29 long shot, double ought with a mg 42 at 70 yds

[@russhayes4882]

This was really interesting !

[@miketheo3425]

Thanks for all the great info, you are a great teacher.Mike from Minnesota

[@2thewds781]

Your a darn good teacher .

[@samwilliams1142]

I have around 5 pounds of .243 round ball from a single cavity mold. Glad I got Lee 18 cavity now.

[@BubbaRountreeOutdoors]

Yessir!!

[@c3outdoors]

Awesome 👌 love the 2.75 ,we load tons of them!

[@richardfuhr7165]

Another fine video. Thanks Wade

[@antonelloromeo2118]

And different test penetration on wood for soft and hard cast pellet...? Tanks👍

[@todddykes3577]

Great vid.

[@travisweldmaster7815]

I like me some BAM 00 PLUS, 10 12 AND 14 PELLET buff, mg 42, cb1138s and ol patternmaster anaconda mid range oddly enough is the best buck shooting choke I've ever seen, or had

[@widdy]

Why do you change shotguns and powder loads at the same time? If you want to see true differences between different loads, only one variable should be changed at a time. I enjoy the information. How does hard cast penatrate vs soft lead?

[@vernonwilson4762]

Awesome job wade

[@BubbaRountreeOutdoors]

Thanks brother...

[@michaelbarrett2346]

Thank you for this, another great video

[@camoshotgun6912]

could you do a video on how to read the shotshell reloading book (how to pick a load for the hull you have) because it is more confusing than a load book for brass ammo. no one has a video on it and it would be good for people getting into reloading shotshell. or you could do a series on reloding shotshells for beginners

[@BubbaRountreeOutdoors]

I'll see what I can do...

[@nsein001]

What about slugs? Is it hard on the shotgun to use hard cast slugs?

[@Maddad_39]

Another video already😮 WHAT!!!!😵 let's go 👍👍👍

[@davidjefferis5832]

When discussing lighter loads using less powder, have you had any experience with Hodgdon Clays? I made up some loads using Cheddite primed hulls, 18.7 gr Clays, TPS wad, and 9 #00 buck shot, Original buffer, with roll crimp. I used shot I cast and obtained some of the best defensive patterns I have had to date, outside of Federal Flitecontrol.

[@brucelewis1017]

What reloaded are you useing to resize you're high brass with

[@l.a.3887]

They looked about the same and good groups I would rather use less powder also I love my old 870 good job man

[@Maddad_39]

I had an anomaly with the spherical buffer in one load I had been working on it was a high velocity steel 3 inch goose load using federal hull 209a primer aliant steel powder, it happened several times about one in every 90- 100 pressure spike, torn/split hull, petals torn of mutimetal wads, sound and felt recoil change, and patern blowout I only had it happen with size TTT and larger. I have since switched to BP buffer in that load and have had no "anomolies" with it. I am curious about the cause now that you had mentioned it happening in some of your buckshot loads.

[@BubbaRountreeOutdoors]

That's what happens to me! Same stuff. Round sounds weird and doesn't perform well. And many times it will rip the hull!

[@ruizhou9612]

@@BubbaRountreeOutdoors Bubba, I use BP buffer only so no experience with Precision's. Do you think the buffer is experiencing a melt-clump then a spike from a semi heat melt? Then the pressure is enough to blow the possible heat clump out the barrel. That would tear the wad and blow out hulls and leave no trace as the clump is powderized again as it goes downrange. Just guessing here of course.

[@charlesdriggers199]

A lot of good information. Have you ever went over 30 grains of Longshot.And if so , how did it react?

[@BubbaRountreeOutdoors]

watch this Charles: kzbin.info/www/bejne/oGTPhn1spKqSi7M

[@sobersportsman]

Cabelas has black powder ball ammo, swagged. Any good?

[@BubbaRountreeOutdoors]

it should work well!

[@outdoorswithroostercurrie6984]

I was wondering if you’ve ever loaded any 000 Buck in a 20ga. And if so what were your results. And if not what is the largest Buckshot size you’ve ever loaded or could recommend?

[@l.a.3887]

The crimp looks good to me

[@williamcrawford7982]

Hard cast penetrate deeper, pure lead explains more ?

[@BubbaRountreeOutdoors]

pure lead has better terminal performance. it expands better in a soft target than the hard cast.

[@MLupacchino]

​@@BubbaRountreeOutdoors what about for close range dangerous game defense?