EPOXY RESIN DOMINOES IN 3 HOURS WITH PICTURES!!!!! | FILLING THE DOTS ON YOUR DOMINOES (BEST METHOD)

[@daelizdixie9693]

Tips! I purchase clear 12.oz plastic cups from Amazon that already have the measurements in ml & ounces and 10ml syringes ( LIFE saver!) Base layer 4 oz of part A 4oz of part B (TOTAL 8oz cup of resin) Filling the cavities Use 10ml syringe. Dip syringe in cup Pull resin to the •8ml• line fill a cavity & repeat 27x's Top layer 2oz part A 2oz part B (TOTAL 4oz of resin) Repeat syringe technique but use 3.5ml but no more than 4ml unless you want a hot mess lol. Math time: 8oz (base)+ 4oz (top)= 12oz makes a COMPLETE set .. No more guessing, running out or left over resin 😊 FYI it's a "lil bit " more time consuming using the syringe but once you get the hang of it you'll breeze right along. Keep in mind you do have to work a lil fast or as you know the resin will get hot clump n that's lost product/money. Lastly I recently started running a blade along the sides instead of sanding the domino when needed.. sis sanding is the DEVIL! Hope this is helpful and I wish YOU and any other crafter reading this many blessings & much success 🤗💕 🚗💨💨💨

[@CraftingwithKandor]

You're an ANGEL!! Thank you soooooo much for this!! Im pinning this comment 💙

[@daelizdixie9693]

@@CraftingwithKandor you're welcome Queen 💕

[@mstressboss]

This is great information thank you so much

[@cv2562]

Sharing is caring!!! I appreciate this channel...I needed these valuable tips!!!🤩🥰

[@JoyLynn82]

Now I gotta buy a dam toaster oven. Have you tried this method with rolling trays?

[@CraftingwithKandor]

😂 i have not tried it with rolling trays, but just make sure you get one that’s big enough. Because the one i have a quite small.

[@TheJosephine26]

😆

[@InvictusP37]

Lmao.. I said the same thing, lol

[@andersonwilliams402]

Where do you get the plastic boxes you use to package the dominoes? I really like those! 😍

[@SoulLaughterBeats]

Groovy tune. Sounds like Patrice Robert's tender. Love the vid thanks

[@CraftingwithKandor]

Thank you for watching!! 💙

[@CraftingwithKandor]

I also sell stickers, check out my etsy shop 👇🏾 www.etsy.com/listing/989671465/custom-decals-for-resin-dominoes?ref=shop_home_active_1&variation0=1913173985&variation1=1913173989

[@lourdescastaneda4072]

Beyond glad I saw your video before trying my first Resin Epoxy pour! 1) how do I stop domino in having concave at end?

[@OnePlus-pb1ds]

Hey where did u get your case for the dominoes?

[@kaybryant7987]

Can you use oven with other type of molds

[@JustMercy415]

Speaking of burning down the house... may I recommend, if u can NEVER heat resin inside the house, meaning go ahead n use ur toaster oven but have the oven outside, patio porch backyard garage etc.. we wear mask inorder to not breathe in the toxins of the resin, but the. When we bake it the fumes/chemicals are released into the air x100!! Be careful and CRAFT ON!!❤

[@CraftingwithKandor]

Thank you for the pro tip!! 💙

[@calvinamason6184]

Do you think if I put the mold in an electric oven at 150 degrees withou me buying a toaster over it would work the same.

[@kashkelly1508]

Look like edges are rough

[@tonyavann880]

I use Mr. Crafty Hands resin. How do you get out the bubbles? I always have bubbles. And it ruins my set. Thanks for your help.

[@pamalakukoyi8327]

Nice video how log should I bake the for and what temp. Also I want to put a resin rolling trey how long should I leave it in the oven

[@CraftingwithKandor]

Thank you! I baked my dominoes at 150 degrees F for 30 minutes to an hour. Rolling trays may need an hour +. My oven will not fit a rolling tray so i suggest buying a bigger one, you may want to bring your mold with you. I do not suggest baking resin in a regular oven since resin is highly toxic. You don't want it anywhere near your food.

[@therichardsonway9109]

Your molds didn’t get messed up by putting them in the oven?

[@CraftingwithKandor]

Nope!! They are heat resistant up to 400 degrees I believe

[@therichardsonway9109]

Oo ok thank you!

[@plfelay55]

Did you spray your mold before pouring. I have the same toaster oven and the bottom of my dominoes came out with holes

[@CraftingwithKandor]

You know what, I thought it was just me not properly cleaning my mold. Some of them did have tiny holes. What do you suggest spraying them with? I'm going to try again.

[@daelizdixie9693]

Hi ladies, I've been doing dominos since Aug 2020 and for a very long time STRUGGLED trying to get rid of those lil corner holes on the bottom of the domino. After researching I found that coating the mold with baby powder those damn holes disappear! When I tell yall my a$$ was STOKED at the results its an understatement 🤣. I pour powder in each cavity and use a blush brush to smear around really good, then flip the mold over, smack it against a box/table to get the excess out. If I can still see powder I just blow it out... give it a try and yall won't regret it 🤗

[@Proud2BAMother]

What’s the case you used and what’s this oven I saw? I never knew you could put it in the oven.

[@CraftingwithKandor]

I got the case from dollar tree in the cosmetics aisle & yes i bought a toaster oven from Walmart for $20 just for resin!

[@diva46226]

Great work ...Where did you get the box

[@CraftingwithKandor]

Thank you! I got it from dollar tree

[@its_Am]

Here you go with another one 👍🏾😂

[@CraftingwithKandor]

I had to put you guys on! 😂 My mind was so blown lol

[@gerrikamonique2951]

Could I use my normal oven?

[@CraftingwithKandor]

I personally would not because resin is very toxic that’s why they tell you to wear a mask, gloves and even eye protection. I just don’t trust to put it anywhere near food.

[@gerrikamonique2951]

Okay, thanks. So when you work with it, do you work in your garage or a well vented area?

[@CraftingwithKandor]

A well ventilated area, i make sure all my windows are open & a fan because resin is STRONG

[@daelizdixie9693]

I ruined 3 sets of dominos using a regular oven on the lowest setting. They had bubbles EVERYWHERE smh. Also my house smelled like resin for a few days 🤦‍♀️ so I don't recommend it either

[@Msbossyga]

Ok sis mine are bubbling in the microwave what am I doing wrong 😩😩😩😩 I have the same oven

[@CraftingwithKandor]

Uh oh! What temperature do you have it on? 😳

[@Msbossyga]

150 I figured it out it was the metallic acrylic paint🥰🥰 . I do have another question actually 2 please. What makes the paint not take in places in the front ? I wish you had a Facebook group so I can message you pictures. 2nd question what do I clean my mold with after o use them?

[@shayemarie6886]

Lol mine did too for the same reason lol 😆

[@daelizdixie9693]

@@Msbossyga interesting to read.. so do you still use acrylic paint to color your resin? I used mica powder & acrylic paint the one time I used my oven and ruined 3 sets 😖🤦‍♀️. Them mother suckers had bubbles everywhere and I was so damn baffled as to why. Lord knows we aint got time to be wasting resin!

[@daelizdixie9693]

@@Msbossyga I use packing tape and run a blade across the mold.

[@TheCraftingNook]

Great job. I just done a dirty pour domino set last week. But before that I done a tutorial showing how to put it together using two sides. Check it out if you get a chance. Love your work. Keep doing good as you are. You have my support 💕

[@jenniferjasso5947]

I also set my project on fire hahaha .. It should have been common sense not to use the lighter on the resin right after the alcohol but.. 🤷‍♀

[@CraftingwithKandor]

I’m glad I’m not alone 😂😂😂😂

[@cassandraperonel7153]

What the name of the pink and white tool used for filling in?

[@CraftingwithKandor]

I have no idea what the actual name is, but i know you can find it at dollar tree in the craft section!

[@BambiBats]

Do you have a website or a Instagram? I love love your videos I found the keychain video sooo useful! Thank you for making these videos 🥳 🤯🤯🤯🤯 in the oven

[@CraftingwithKandor]

First off, Thank you for watching & subscribing!! 🥰 & Yes I have both! My website is Kandorcustoms.com IG: @CraftingwithKandor