Epson WorkForce WF-2850 | Wireless Setup Using the Control Panel

[@roxannerains3047]

EXTREMELY HELPFUL. 61 years old and my first printer set up.THANKS!!

[@mariabohaty6596]

What about setting up the Fax machine ? You never mention this.

[@luxxiplaylist3573]

Is the connection process the same for the Epson workforce 2835

[@adamguymon7096]

I have an Android phone and I am trying to scan and print from that, is there a video for that?

[@epsonamerica]

Hi, Adam - please contact our Support Team for assistance at 562-276-1300 Mon - Fri 7am-4pm PT. Note - we will be closed tomorrow and Friday in observance of the holiday. Thank you!

[@quenniepearlborja2222]

Can this printer allowed documents from android to print?

[@sparkie92567]

yes... go to setting on printer and set up for the wifi printing

[@LeroyRichardson-bi7to]

Eeveryone doesn't use WI-FI , Does this printer work with a land line computer ?

[@epsonamerica]

Hi, Leroy - Yes, the WF-2850 connects via USB as well. Standard Connectivity: - Hi-Speed USB - Wireless (802.11 b/g/n) - Wi-Fi Direct

[@gklantone3535]

Yah I did all this and it still wouldn't connect....so frustrating.

[@epsonamerica]

Hi, Eve - please contact our Suuport Team for further assistance at 562.276.1300 Mon - Fri 7am-4pm

[@ashrenae4889]

If you don't have a computer can you still do WIRELESS printing?

[@sparkie92567]

yes

[@D3athly._Hal0s]

@@sparkie92567how???

[@bobsellers9364]

I have a new computer. how do I get the epson wifi 2850 connected to it and print?

[@epsonamerica]

Hi, Bob - for help with wifi setup, please call our Support Team at 562-276-1300 Mon-Fri 7am-4pm PT. Thank you!

[@shawnstone1164]

Thanks for the help!

[@ellenstein3832]

I set up the wireless and was printing fine. I shut it off for the night. And now turned it on and the wireless is not working. Do I have to put in the password each time I turn it on?

[@epsonamerica]

Hi, Ellen - please reach out to our Support Team - they are available Mon-Fri 7am-4pm PT 562-276-1300. Thank you!

[@VERADZN]

how to insert ink cartridge

[@juancarlosmendez4943]

Need help, the printer is not printing anything at all, head clearing 5 times already/ change the ink new ones 3 time / IS this the sworware problem???

[@epsonamerica]

Hi, Juan - please contact our Support Team at 562-276-1300 Mon - Fri 7am - 4pm PT for assistance. Thank you!

[@Sarca.torres]

Do we have to pay for the software?

[@epsonamerica]

Hi, Karla! Please visit epson.com/Support/Printers/All-In-Ones/WorkForce-Series/Epson-WorkForce-WF-2850/s/SPT_C11CG31201 for all downloadable software

[@patriciaaskew2325]

How do I cancel the printing job?

[@epsonamerica]

Hi, Patricia - there are two ways, either by the print manager on your device or using the control screen on your printer. Please call 562-276-1300 to walk you through it. They are available Mon-Fri 7am-4pm PT. Thank you!

[@DrDavidIllig]

So far I have failed to find any help on using a cable to connect. I know wireless is being worshipped. But everyone doesn't want to use it. What type of cable works? Thanks

[@epsonamerica]

Please contact our Support Team for assistance. You can reach them at 562-276-1300 Mon-Fri 7am-4pm PT. Thank you!

[@lukeg6355]

Same here!!

[@lukeg6355]

About to return this machine

[@injusticeberserker2800]

Where to load paper for this machine

[@sparkie92567]

in the back of the machine ...make sure you adjust the 2 blue tabs (in the back were paper sets) to fit the paper or printing will be offset

[@williambonneau1220]

i want to know the ip adress of my printer any solution for this ?

[@BillyKing21]

From the printer's control panel go to: Settings-->General Settings-->Network Settings-->Advanced--> TCP/IP

[@xLdakingx]

If your WiFi has a 5G and a regular network make sure the printer and computer are on the same one , took me an hour to realize why they wouldn’t connect

[@rehanaginwallaabbas2078]

the printer doesn't find 5g network. What shall I do? Thanks in advance

[@rajvirrose7915]

@@rehanaginwallaabbas2078 did you manage to figure out? Because I am struggling with this arm too

[@FuzzyFerretz]

just saved me longer than an hour probably, thank you

[@nicolepaquaud1214]

Vidéo en français ça n'existe plus.

[@TimberHillRedboneDogs]

Worked for me

[@amparollorenteperez8037]

En español

[@ggam0989]

do i really need to pay 9 dollars at month for a one time use software i call that bs

[@teriod5475]

That's a third party vendor.

[@sparkie92567]

this should be free for an update to the software program