EQ Trick They All Use

[@boogiesnail]

Thank you for sharing this technique 🙏👍

[@Venjent]

Streaky always brings home the bacon 💪 Cheers for another G tip mate!

[@Streaky_com]

Very good 😂

[@DjJay]

Pure Gold My good man. Been producing, mixing and mastering for about 15 years now and probably watched most of the videos, trick and tips out there, but you come up with stuff I've never seen or heard of before on a regular basis. I just tried the Pro Q3 vocals sidechained to the instrumental method in my last mix and was blown away and how effective it was. This sounds bloody awesome too, can't wait to try it out!!!!

[@Streaky_com]

Nice one cheerfs

[@eroero830]

@@Streaky_com I want to master from stems but I don't own a plant can you help me?

[@shellunit]

@@Streaky_com Can someone link me to the "Pro Q3 vocals side chained to the instrumental" video? Thanks.

[@branchyapple]

@@shellunit you mean this one? kzbin.info/www/bejne/n4LEo2NjqZlrrs0

[@branchyapple]

@@eroero830 you dont own a plant?

[@flemgrem4241]

This is fine if your track is all in the same key and uses a simple chord progression, and you want the end result to sound samey all the way through. (Like dance music does) I challenge you to apply this to a track with slower guitar/piano and vocal progressions, where the focus is less on the beat and more on the nuanced listening experience. The mantra is do no harm, but you'll be taking away frequencies that make the 2nd and 3rd harmonic speak to the listener. Those clashes are super important in the relationship the listener has to the track. For example, if you Q the key frequencies and then then play the tonic (I), it will sound 'musical', but for The next chord the IV and the V (for example) you've Q'd frequencies that are not cadent to those chords, and so you lose the essence (harmonic interaction with the tonic) of those chords, until you return to the tonic. So effectively your emphasising the tonic, but in so doing your also removing the dissonance that could be important for the feel of the track, that the artist intended to portray (whether they knowningly intended it or not [this one of the reasons why a song is a hit or not, imo - why does song A speak to volumes of people and song B does not]) So im my humble opinion: you're taking away from the track and doing some harm in the process. 🙏 I love your stuff, and continue to listen and apply your advice all the time to my mixes and masters. But I feel i had to raise this one with you, as a musician to the mix engineer. 🙏

[@Marchuevoreal]

I do this with keys use in the melody of the song, usually 5-7, for me it works good only using those.

[@Embee-Juice-Splash-Recordings]

you have a great way of showing pro tips and tricks i have just apllied this rule to a song im working with that is in C Major but contains the chords G-C-D-F Maj 7 so with out highlighting the notes i have in these chords on the EQ CUT this has been a massive step up in sound in other words some of the black notes have been emitted from the EQ cut to follow the chords thank you for the tips

[@lukather1]

You could just use scaler eq.?

[@ClosetoHumanMusic]

I've been using FabFilter for as long as I can remember, but never really got the utility of the dynamic EQ. Is it just engaging when the band surpasses a volume threshold?

[@Streaky_com]

It’s on proq3 and then it’s the outside ring

[@singhamar85]

thank you so much for teaching can useful each instrument ?

[@Nedvio]

Thank you Streaky. Subscribed. Best mixing and mastering channel ever. I even bought FabFilter plugins because of you. God bless 🙏🏻

[@tilliinfinity]

do you know mr bill? its more about production and sounddesign but also some mixing tricks. he is my absolute favourite youtubetutor and i learned a lot from him.

[@StevieBoyesmusic]

Those scale things get my music wrong often. Also I wonder how much different this sounds to turning instruments down ~2dB and using a +2dB high and low shelf boost, given how subtle it is reducing midrange.

[@sarpyilmaz7697]

what he did would almost sound exactly the same if not better if he sidechain compressed the piano to the clashing frequency range of the vocals slightly , I assume what u suggested would also do the same job with better results then his comb filtering weirdo technique , Some may think Im a noob and he is a pro so he must be right , although I would simply say I have just as much experience and knowledge as he claims he has ( btw if he would grant us his real name we could investigate his credentials but because he hides it , we simply can't ) has but because ad homenum argumentation is a proven fallacy I would just ask one question to the ciritical thinker , How did any legendary engineer or producer used this trick "THEY ALL USE" before roughly 2010 's where unlimited band digital EQs with unlimited flexibility in frequency choices and q settings came on the market, how did they simply do it ? With Graphic EQ s ? very unlikely cause as we all know Graphic EQ s are fixed frequency , with all due respect teaching a techique U think would work and showing it to others is fine but advertising it in a way as if u are revealing a secret technique that every pro uses but is hidden from the masses kinda thing is just another level of .....

[@ElectricEddieDaus]

@@sarpyilmaz7697 Everyone's needs to stop trying to put a Bandaid on things with Sidechaining , Compression and other Plug-ins. Get the music tight first. Don't try to fix a bad arrangement or sloppy playing by having the engineer try to fix it in the mix......... Also if the singer and the Piano player are all plying in the scale of Fmin then there should not be an issue with wrong frequencies unless were dealing with a bunch of harmonic overtones which can be possibly fixed in the arrangement.... I think more of the problem is the arrangement and the lack of Good Lyrics that fit nicely over the instruments... There's more going on in this example then notes that are not in the Fmin scale.... Thx ElectricEddie 😎

[@johnc3451]

@@sarpyilmaz7697yeah I’m not buying this technique. This seems like a very improvised noob technique that just seems clever because it’s different. No human ear is discerning the difference in doing this comb thing from just sidechaining out a whole band and inharmonically saturating it back in. There’s a lot more standard ways to tackle that frequency mess, easiest of which is binning that whole mess of a song. The lyrics don’t need to be slamming with the same energy and pace as the keys are doing and conversely that obnoxious synth / piano that hits overly percussively is doing nothing for the feel of the song except giving a headache. Engineering should never be used to fix bad music compositions. This is powertool chiropractor stuff

[@johnkleanthous5057]

Hi Streaky, just wanted to ask about this method as it confused me a bit, im new to music production, purely out of hobby with hopes to do it proffesionally, so when should this EQ secret be used? what if the piano has a certain frequency to boost where the notes are? do you just add 2 EQs 1 just to subtract the frequencies of the notes and another EQ to do your regular equalization? if my key is F major then it means we need subtractive EQ for those notes not in the scale, on all tracks/channels that have instruments? Greatly appreciate your tutorials thank you, and thanks in advance to whomever can answer this.

[@juanochoa2586]

Been recording professionally for 20 plus years but i'm new to mixing and mastering my own music and your videos have been like GOLD to me!! I just bought your FF ProQ3 preset pack and was'nt sure how much I would use them, if any but your some of your presets sound like they are polishing up my mixes to an industry standard level... This preset alone is worth the $30 I paid fo the whole pack so I am a more than happy customer! Thank you for sharing your secrets and wisdom with us aspiring engineers!

[@RealBassPhat]

Streaky, I've been watching you for years now and you're an incredible resource. I purchased your FabFilter presets which are really useful and a huge time-saver. It feels great to support you. I'll be looking into your other offerings. Really appreciate how you're helping a lot of producers up their game.

[@Seanrayamusic]

For those that own Soothe by oeksound, you can achieve a similar effect sidechaining soothe. I find it to be a really transparent way to do this. Trackspacer is another great plugin for spectral sidechain. Also, techno would like to have a word with your "every track has a key" statement 🤣🤣

[@lamarasamuel]

soothe does it by key?

[@hearmenow909]

Techno isn't really known for pianos and vocals and Trackspacer is a really limited plugin and not useful in any way for this method. Soothe is ok but you can't pinpoint notes that are not in a key like you can in Pro-Q, unless you have a method for Trackspacer and Soothe that you want to share with us?

[@Mixedbyjojo355]

⁠@@hearmenow909 soothe and trackspacer will only tame the opposite of whats feeding them when in sidechain mode! But doing what streaky is showing here, is more of a specific scenario where you haven’t much control on individual elements! Bcz you are taking way so much harmonics making the sound thinner! And creating phase artifacts!

[@kaneel36]

@@Mixedbyjojo355 that's true with phase. but all of us can hear difference in this video, vocals are clearer

[@naughtyducky6325]

@@Mixedbyjojo355ou can do exactly what he’s showing here in sooth2 aswell just sidechain an audio source containing all the notes outside the scale to it. Just generate a sine wave in serum or sylenth and put it to the midi you want. It will tame those frequencies then

[@AlexCaspian]

How can I get stems from Nightcap track "How It Feels"?

[@zwsh89]

This trick is great for folks mixing for artists who exclusively stick to one key, but many songs will borrow notes or chords from other keys, and I wouldn’t trust these auto-detect websites to catch that. For example, buddy holly by weezer is mostly in F minor also. It’s a very simple song in almost every sense, but even in something as basic as that, in the prechorus, the song uses a C# minor chord which is not in the key of F minor. That chord has an E natural, one of the notes we saw that you should turn down in this demo. So if I’m the client and my mix engineer puts negative gain on all the E naturals across the mix, I’m probably firing that person. Theyr reducing the impact of my prechorus by using cheap tricks and internet shortcuts instead of learning how to actually analyze my music and treat it properly. This truck works fine for top 40s style pop for the most part, edm, house, club, etc, where many of the artists don’t understand this either… but I want to mix for truly creative musicians who are pushing the boundaries of their genre, and I will never impress them with tricks like this. I’m sure this video wasn’t intended to be a “one size fits all” solution, but it was presented that way, with no mention of talking to the client, or analyzing different sections of the song to ensure that the verse and chorus are in the same key, or alternative solutions like having an instance of pro q with E natural turned down for the verses, and another instance with E natural turned up that would get turned on or off with automation for the appropriate sections of the song. My point is-as a mixing engineer who also is a musician and composer, this trick is indeed great, but is much more advanced than this video implies. In the wrong hands, it can cause way more problems than it solves. This would never work on a Radiohead song. I’m not saying don’t use it, I’m just saying… be careful, and maybe make sure your clients know you’re doing it so they have a chance to let you know about that E natural in the pre chorus before you unintentionally damage your own mix

[@molem348]

I did think the same as I was watching.... great tip but does need care. Another thing to consider is if the track is in a mode like Phrygian, a lot of the key detector apps usually default to telling you it's Major

[@zwsh89]

@@molem348 that’s true, I thought about that too, but then it hit me that even thought the websites will probably tell you that something that’s technically in G mixalidyan or D Dorian is in C major, that’s all still the same 7 notes. So I give the pushers of this trick a pass on that aspect, but you’re asking the right questions. Another concern I had with this trick is overtones and harmonics that don’t fall into the natural key pitch frequencies. Reducing the “out” notes could be unintentionally changing the tone of the instruments in a mix, like a piano for example. Some of those frequencies might be clashing with other elements of the mix and muddy it up, but if you just throw this trick on every mix because it’s being sold as a “make anything better” pill, you might piss off the piano player who invested thousands in that vintage Steinway and treated room, and then paid you to bring it to life, not to use free, untested, aggressive mix moves to try to make their incredible piano somehow sound even more “musical.” We don’t need to try to fix problems that aren’t there, and while I love some of the content on this channel, click-batey tag lines like “the pros do this on every mix” are definately confusing the message. It’s a cool trick but you gotta consider when, and more importantly, how to use it.

[@relaxactive3545]

@@zwsh89 dude the tip it´s there, what you say it´s obvious for any mid-lvl producer... and if you are a beginner you shouldn´t even be watching how to mix hahaha but ye i got your point, obviously if a song is in more than a key dont do that, ok, tho you could then automate 2EQ´s(one for verse and other for chorus) or maybe even 1 EQ looking at both scales...no?

[@chaddonal4331]

Exactly! Also, I don’t like the idea of websites to tell you what key a song is on or what notes don’t belong in a scale. If you don’t have enough music theory to determine these things, then this whole tip is appropriately out of reach. Also, the technique - even if used by those who know what they are doing - seems specious. Generally, non-tonal notes aren’t played, so cutting them is reducing harmonics which provide richness. If they ARE played it is intentional for spice (to go out of the key) and shouldn’t be randomly reduced. I’m thinking that there are other ways to suppress resonance. But I admit have not tried this selective approach.

[@zwsh89]

@@relaxactive3545 ya that’s really what I’m saying. I’m not saying “don’t ever do this, streaky is wrong.” I’m just saying you gotta be careful. Two eqs, automating, there are plenty of solutions, you just have to already know the material you’re mixing and what’s appropriate for it. The way this trick is explained in the video implies that you don’t need to worry about that, it will just work. The problem isn’t with the trick, it’s the presentation. It’s like me saying “you can use a preset you like on a compressor for any sound and it will always do the same thing…” no, you need to know your input level, the dynamic range of the material being fed in, the appropriate output volume for the track, the harmonic content (is it a bass with lots of boomy low end, lots of sustain, and dull smooth attack, or is it a high-register synth pad playing short sticatto notes) etc. there’s almost nothing that works as a “one size fits all” mix trick

[@matt_nyc_audioengineer]

I would be concerned this could lead to some pretty nasty comb filtering artifacts in some instances tho. Seems like it could be useful in the right context but I would be very careful and make sure to listen for artifacts.

[@abrotherinchrist]

I thought it took a little life out of the mix. It sounded a bit stale to me. Maybe he just overdid it. It might be better to go through and find which are the most important notes to duck and leave some of the harmonic character in tact. I could see this being a very situational technique.

[@matt_nyc_audioengineer]

@@abrotherinchrist Agreed! It sounded much flatter when the eq was turned on. I'm sure in some situations this may work but there are many techniques to deal with masking that work better in my personal opinion. As you said, I would find the specific frequency range that was causing the masking and treat that to solve this problem rather than pulling out the frequencies that relate to the key of the song. I can just image the phase issues this technique would cause as well hahaha!!

[@hertzouttahell]

⁠@@matt_nyc_audioengineerLinear Phase for no issues is the way to go then.

[@pigknickers2975]

I would just use the Q3 mix control to wind it in. Mastering is always about subtleties. Q3 would not make artifacts really, that's the wrong word. It may sound like a comb if exposed but on these stems it works fine.

[@matt_nyc_audioengineer]

@@pigknickers2975 Wait, you think Q3 is incapable of creating artifacts? What exactly do you think an artifact is? The sound of comb filtering is an artifact lol. Also, what does sound like a comb mean? Just curious...

[@palinoman]

You quickly became my number one teacher. Great techniques and easy explanation. Thank you.

[@TokyoSpeirs]

I’ve done this before in small degrees, it’s awesome. I limit it to only turning up the notes in the melody up dynamically instead of removing the notes not in the melody. Similar concept

[@OmnionAmbients]

isn't the fix a lucky byproduct? In essence you are removing out of key freq also affecting the vocal etc as well, it just happens to reduce the piano more as it sits louder in those out of key freq?

[@AshleyGodfrey-Keyte]

Would this mean you then have to automate in a separate Eq plugin ,if the piece was to change key ?

[@mendiapodaca]

Do you do this with every bus/stem? Cheers.

[@papitoredmusic1]

I've learned more in a few months than I have in many years of trial an error. The journey is fun, but this type of micro-learning is great, easy to assimilate and retain. Thanks again.

[@siliconchip5933]

Tried this technique for the first time tonight, and it worked great. Great trick to keep in the toolbag.

[@negvey]

Absolutely amazing pro tip, thanks so much!!!

[@ChrisThomasBone]

Just use a broad scoop, people. The net effect is a broad scoop, but this will eat up 10x as much of your processor. Just scoop your dang mids

[@hermanshermits705]

I was always taught that using too much eq (and narrow bands) will make a sound dis-jointed. This example sounds great, you have amazing original ideas that I was never taught!

[@Streaky_com]

Tight cuts broad boosts

[@soundscienceuk]

you are just comb filtering though right, and surely if you are doing this type of drastic cuts you should put the eq in linear phase mode? Also, I dont get why you dont just kind of work on inverting some of the notes/eq notches, and create almost an chord in the scale instead of removing non existent notes with in the scale. Please help me understand further?

[@soundscienceuk]

I feel like i would of put the eq in M/S mode and then boosted the notes, creating more space .

[@Hive5ive]

Hey, I bought your eq presets and I don't have these, what gives?

[@christinazoina7409]

So, you’ve basically eq’d and compressed all the notes that the piano isn’t playing, since they’re not in the key!! If the notes aren’t there, then you’re not eq-ing anything. However, since the eq frequency band is likely a little wider than just the ones you’ve chosen, it is having some effect on the edges of the notes that are being played. But basically, you could get the same effect by using a multi band compressor.

[@OfficialStevenCravis]

*Streaky* this is cool, and fascinating to me because I was once asking Izotope if using their Master Assistant to reference another track would be impacted by the reference being in a very different key than the key of my own song being mastered, and they agreed it does make a difference. VERY cool that you created the FabFilter ProQ presets. Just bought it. Thank you for the deal!

[@ibahrain1984]

Thank you for the wonderful explanation and information from a wonderful person... My question is why did you add a key (F#) from among the keys and reading why from the site did not include this note?It F was just not F# please explain ❤❤

[@PLHaagmans]

can you do this on other EQs or do I need the fab filter?

[@bcraigcraig4796]

Great video I do not have Pro Q EQ just eq how do I approach this Thanks

[@Streaky_com]

Watch and copy

[@loveit8602]

omfg this is life-changing. thank you streaky i hope you know how much we love you

[@lalocura1828]

I been using this concept for the past 2 years amazing

[@sharonsoulmusic]

Great lesson. Thank you. Links for preset aren't working for me.

[@Barncore]

Do you get problems with phase from doing that?

[@Streaky_com]

Depends you need to listen

[@shinyisshiny7780]

yes

[@miRogMusic]

Streaky! I've watched so many of your videos and even going back through, I really wanted to try to find a good video on backings and adlibs, how to get them to sit in the mix properly. No one does it well on youtube, I've learned how to use Multiband compression to assist helping vocals sit right, but how do you properly differentiate your backings from your main vox from your adlibs within the beat??? Would be amazing to see you do a video on this I really hope you see this

[@TheDilligan]

This is brilliant. just slightly decreasing all dissonant harmonics.

[@OperculumAudio]

Amazing! Streaky, you are one of the best!

[@muffvn4060]

Is this better on the master or individual busses? Would you apply this to drums etc?

[@Streaky_com]

No rules try it on anything but not always only if something is off key wise

[@CesarMorera82]

So are all notes in the octave in your mixing folder presets to use like the ones here?

[@tomdouglas6053]

dude your the man I have to hire you to master one of my records in the future.

[@444zzz]

How do u know what keys aren't

[@mauricemm]

Thanks Streaky, is the preset in the master or mixing folder?

[@corosta]

I did not quite understand on exactly which tracks/buss this should be applied. even drums ?

[@SteveGietz]

Excellent little tip. You can probably get away with just saving two presets (Cmaj/Cmin) and then transpose up and down to match the key of the song. Easy as pie with the Pro-Q. Good stuff 👍

[@RAISING_WOLVES]

Seriously powerful techniques, again!! Thanks Streaky 👌👌👌👌

[@xlsxmusic]

I've seen a similar thing before but by boosting the notes in the key. Quick question about your method though, aren't you technically just turning down the piano because looking at the lines on the EQ it looks like everything is getting around 2db cut between the wrong notes?

[@jairrobalino]

It’s making space for the vocals in those little pockets, which is helpful since in this scenario he doesn’t have the piano stem just the instrumental as a whole

[@xlsxmusic]

@@jairrobalino thanks for responding. I understood that bit, it just looked like when he added the dynamic 5db cut it was then pulling the EQ line down a couple of dB on the areas between as well.

[@AKAtAGG]

This is frigging amazing work. The difference that step made was insane.

[@iamjusd157]

brilliant !

[@ronpasch72]

So, the song is in F Minor (and changing chords mind you) and you are taking away the frequencies of the piano notes that are *not* in F Minor (and not any other chord it changes to), and that is then giving room to the vocal? Please explain the theory behind that because it sounds to me like a commercial to sell your Pro-Q3 presets. If two things clash and I want to put one of the two in front, I use things like Trackspacer with a sidechain input. Probably much more accurate as it reacts on the frequencies that are actually clashing. But by all means, try to convince me I'm wrong and this technique is much better.

[@fytstaff4570]

Maybe using something like Wavesfactory Trackspacer would be better for this problem. This seems like a way to create some nasty comb filtering. But that's only my opinion. Love your videos.

[@soundscienceuk]

exactly my thoughts and the phase shift would be bad if not in linear mode

[@ThijsNaus]

Wow unbelievable what it does ! This is magic ! Thanks for sharing again !!!

[@markl5998]

Can you do this in fl studio with stock plugins

[@cameronblack7984]

Other KZbinrs definitely give some value but you can just tell how much more of the real deal Streaky is.... thanks!

[@kevinlentz7604]

Streaky you seem amazing been watching for a while,looks like I’m gonna binge on Streaky videos for next three days

[@reubenza3781]

holy shit dude that's so cool, i guess you could also sidechain the vocal to this eq so it only attenuates the piano when the vocal is there

[@DOX808]

Brill, cheers streaky.

[@NeonCityDreamsOfficial]

i’m seeing some pretty negative comments which is understandable. Everyone has their personal preference when it comes to mixing. I’m no pro by any means at all, i’m still learning. However, to those really just hating ask yourselves; what good is it complaining about something I didn’t mix?Honestly, how about just making a video of your own and sharing the knowledge that you supposedly hold I mean if it is solid like you want to claim, then make a video showcasing that. Words are cheap, actions speak louder. Personally i’ve been trying to train my ears to hear the subtle differences when mixing because it is something i struggle with at times. In my opinion i heard the difference between the two. If you think it flattened the mix, you listened to the mix with a different intention or mindset. I think the Before’s piano is flat because the two elements are def competing for the same space which makes the mix muddy. In the after you can hear the piano ducks a tiny bit enough for the vocals to breathe and give a nice back and forth between the two. Yes there will be amateurs who watch the video and not know what they’re really listening for but, i find there is also people claiming to know what they’re talking about and yet they still don’t know what they’re listening for. So all in all, i just want to say keep shining and because of your tips i’ve been able to help develop my sound. Still amateurish but it’s progress and the beauty about that is that progress never stops unless you do. To those who are being negative ask yourself; why? are you building people up or tearing them down? I will not respond to any negative comments the minute someone replies with one i’m deleting the comment. It’s just energy badly spent, people will find any reason to put you down for their own shortcomings. Much love everyone ❤

[@JimWolf]

Dude. Your vids kill. Next level concept

[@bladetj]

Wow this is a great tip. Thanks for sharing!

[@ElectricEddieDaus]

Hi Streaky, Just started following you and have picked up some Great tips along the way. But something does not add up here. You say the key is in Fmin and your removing all of the notes that are not in Fmin scale. If the keyboard player knew what he was playing, and I am assuming he does. Then notes that are not in the Fmin scale are not being played to begin with.... So then whats the point in removing some of the frequencies of these notes not in the scale with the Fab Filter if those notes are not being played in the first place?? Also not sure why you're saying the paino notes are grating against the vocal, because if the piano player and the singer are both in Key there should not be any kind of Rub. Can you elaborate? Sound like the issue is more of the arrangement since it seems very cluttered....... Thx ElectricEddie .... 😎

[@Streaky_com]

Harmonics

[@ElectricEddieDaus]

Ok... that thought crossed my mind but I wasn't 100% sure if harmonic overtones outside of the scale would really make that much of a difference. But it seems like they may. But is it that noticeable that it needs to be removed? I didn't hear much of a difference if any at all with the before and after and I'm listening with Adam speakers. Although I gotta say I think KZbin steps on the sound a bIt which can keep the finer points from being heard. So I don't know if that's why I'm not really hearing a difference.

[@Dane_Riazer]

I never ever EVER thought about doing this! This is why I subscribed and hit the bell notification you got the good stuff!!! 🙌🏾

[@TOPBOYish]

Could I add this to every musical element of or should this only be used sparingly on certain sounds ?

[@phladjki]

this is amazing. sounds so much better. I wonder what related techniques exist.

[@jsalvatori]

The problem is you're starting with a crappy over compressed wall of sound right off the bat. Get rid of the synth in the background, ditch all the compression on the vocals, and you won't need this "trick" at all

[@Streaky_com]

It’s just a demo not perfect but you get the point of it

[@RealBaba]

I can't find it on your website . Need a link to buy it

[@tariqtayab]

Thank you so much for all you do.. I love you man!

[@darkcharmrecords]

Have your preset pack, checked the mixing section, can't see any presets like what you are showing here... what's the name of this one?

[@Streaky_com]

Redownload

[@pandastick33]

Hey! What track is this? :)

[@choosers5177]

Can you do this using zynaptiq unfilter?

[@lumpyfishgravy]

Considering the dBs it's quite subtle - but good.

[@naughtyducky6325]

You can do a similar sorta thing if you have sooth2 just create a track with an audio source containing all notes outside the scale you could use a sine wave, then sidechain that to what U wanna tame.

[@ChaceBonanno]

Never thought to target unwanted frequencies by simply choosing the frequencies that are out of key but it seems so obvious to do now that I think about it

[@DavidFritz77]

Amazing thanks for the tips!!!

[@raphaelmas1852]

The only issue is that this track is not in F minor at all. I don't know how those sites are detecting keys, but the result, at least in this case, is completely off. This song is in B flat minor, or A# minor (depending on how one would want to write it).

[@georgezorbas9036]

Clever. So u prefer this approach vs trackspacer?

[@donnas8408]

Streaky you are a blessing - ty

[@bobless5517]

You're such a cool assistant-teacher! Thanks!

[@JSoulKeys]

Absolutely brilliant mate! goodness what a pro tip!

[@antoineschillemans]

fantastic Steakster!! greetz from amsterdam,,,,,,,i bought the presets

[@fwscoringmusic6670]

amazing thank you Stricky 🙂

[@maphirotron]

01:05 What? You write the track, so you know the key instantly 🧐

[@Streaky_com]

Hopefully but I don’t write tracks anymore just get sent others

[@maphirotron]

@@Streaky_com ah ok.

[@beaujaymes75]

Funny, a good friend of mine explained this to me but I didn't understand. I saw this video and now I see. This is a game changer

[@minstinct280]

You kick ass, Streaky! Can you pls do a part 2 (a related concept)?

[@dja.d]

Great guide, been a long time silent follower.. some great content!

[@Streaky_com]

🙏

[@JM_2019]

Can someone explain why frequecies are removed that the voice is NOT singing? I would have expected that those are removed that the voice is also using but that would be the ones within the scale.

[@Jabez007]

I appreciate the help because circumstances are the best at the moment Thank you ❤

[@luisavila9436]

Thank you, Streaky! You are God-sent! Keep doing what you're doing.

[@insertanynameyouwant5311]

maybe it will work for simple melodies like this that have 0 changes over time but with complex chords that constantly change and modulations, I wouldn`t do it. Sage Audio uses this trick in almost every video

[@crisjones2443]

Hi streaky. So, u apply this to instruments that r, let's say, secondary to the whole arrangement to give room for the main instrument/s which in this example works for the lead vocal, right??

[@crisjones2443]

U applied this to the piano, but also to the rest of the stems MINUS the lead vocal??

[@bobetterknow]

@@crisjones2443nah, only the piano as that’s the only thing causing the issue for this exact problem. The piano frequencies are fighting for the same pocket as the vocal. No need to do that to the drums and bass in this particular mix :)

[@DavidAskerMusik]

That’s a nice trick to get a cleaner mix 😊

[@tracktaylor2783]

WoW!!!Now THIS is a gamechanger.. tnk man..!

[@Rolanoid]

Mind blown. Instantly transformed into that PNAU sounding mix magic but actually Nightcap in this case.

[@mabian69]

Really skeptical... isn't this the entrance to a hell of phase shifting and fatiguing sound alteration? I think that the mix has from the start a serious excessive sidechaining problem and this is already an issue from the beginning...

[@technoisbeautiful]

Question: Are your Vocals and Piano on the same track? Would be cool to know whats in INSTRUMENTS and whats in MELODY - I guess everyone has a different approach on categorizing that :D

[@JTFuller]

WOOOOWWWW!!! That was crazy!!!! Thanks dude...

[@emiel333]

Great technique, Streaky.