ERD bulletCentral FX Impact precision magazine review

[@Maloneranger0311]

Outstanding! On waiting list for one right hand .35 cal. Glad I’ve put off waiting to order a second one

[@Crazyhorseracing461]

I like. I’m so happy someone finally made a left handed make. After all these years 👍👍👍

[@richoperezinho7215]

@ernest in .22 what is the most bigger slug that can operate..? 40 grain.? Or just 34 grain.?

[@MrBad4fun]

Ernest, I thought in your opening, you mention Bullit Central making left handed magazine..?? Where and when will the left handed magazine be available..?

[@FreeFarmPestControlUK]

wow 🤯 I really hope that you guys have made 10s of 1000s of these because I reckon these will be extremely popular 👌 👏👏👏 very nicely done indeed!!

[@FodzyleGEEK]

Hello Trouble with the kit tensioner. to fix the carbon tube of the kit you have to screw the bolt at the end of the barrel on the screw that holds the liner. But these screws that hold the liner and the carbon tube are tight, the slugs go all over the place, there is no more precision. Ernest Rowe shows us how to tighten the tensioner kit but tightening the kit tightens the liner screw and we lose precision. It would take a stop for the screw that holds the liner. Do you have a solution ?

[@milkybaravenger]

It would be nice to have a magazine that could hold more than ten 40g slugs without the spring failing. Do they have some extra space for longer slugs?

[@kirbysands3197]

Hey Ernst. Like the video on that new Bullit Central left and right-handed magazine. When will u do a video of the installation of the plate to make the left-handed magazine work on the m3? Really get a lot out of your videos.

[@Rollin-With-Kirk]

So I just have to chime in a little. By no means throwing any disrespect at all because Everything Ernest Rowe has made I've bought, everything He's talked about I've somewhat followed and somewhat Abided by. But Please, Please tell Me Other than Precision machining, different retention spring, a bearing, less pellet wobble/shake, ability for a little taller slug, what or how does a $128 magazine make an FX impact more accurate than a $45 magazine? I ask this because I remember when the Eaglevison came out and It was the Shyt, best magazine there is, precision made by cnc machining, high tolerance, better longevity for $150. I bought one! My gun didn't shoot any better with the $150 magazine than it does with the $45 magazine and I've shot over 3000 slugs through My $45 magazine/s and never had a failure and they're still not worn out! You also mention below much better for hunting, more precise kill? So how much more accuracy will this magazine add to My already average 1" sub-moa at 100yrds? Just an honest question! Hope this doesn't come off as rude, disrespectful or with having some kind of attitude!

[@ernestrowe5061]

I Respect your opinion with past experience with EV mag. I don’t think i can convince U in anyway about the BC P-Mag, u just have to wait for actual user reviews.

[@MasonStormSunny]

​​@@ernestrowe5061 there is no way that magazine can make the gun more accurate if your old mag is in axis good enough so that it does not damage the slug during chambering. The slug alignment in the bore is done by a probe, not the mag itself.

[@Rollin-With-Kirk]

@@ernestrowe5061 Thank you @Ernest.. I do have Huge respect for what you do, your opinion on better enhancements, Your Excellence in Engineering and tune/tuning help! Firm Handshakes!

[@Tunnelrat6666]

I only have the FX mag that came with the gun and it is shit. I just what a mag that works the way it should.

[@Ineedcoffee-n4j]

@@MasonStormSunny if the mag has the slug at an angle the probe will just mash it into the chamber at that angle creating flat spots on the slug

[@franciscocarvalho2424]

another success was dreaming happy for you like guaranteed always here in Brazil 🇧🇷

[@59dojomo]

Can not find a .30 caliber 700 mm barrel kit for my FX Dreamline... Does anyone know where to purchase the .30 caliber 700 mm Barrel Kit...?

[@MrBad4fun]

Could someone please show me the left hand magazine installed on a M3

[@ArturoGarcia-kx8pq]

From the Philippines. How to avail your new ERD Bullet Central FX Magazines

[@allenhaymond5934]

Where you buy it

[@andrewholt7075]

Does any one know where to get these in Canada?

[@redgum1340]

The clear cover might be Polycarbonate, I suppose.

[@artekdiablo]

Hi Ernest where can I buy them??????

[@masneobarbar573]

Where can I order such a snare address?

[@varmintknockers]

Lots of good information at 22:33

[@bcml8]

Hopefully they will be available ALL black ??? The gold just doesn't look good !!!

[@ernestrowe5061]

We tried black, but it was hard to tell Dark gray against black carousel and case

[@dougiefresh3767]

Gold will look good with my bronze m3. Sorry brotha.

[@ernestrowe5061]

@@Maloneranger0311 , much better for hunting, more precise kill

[@dougiefresh3767]

@Maloneranger0311 I've harvested plenty. Don't know where you hunt in an open field. Secondly, nobody is making anyone buy them. Lmao!

[@Maloneranger0311]

You are right Ernest, since the gold is to the rear it won’t matter👍

[@ctom4103]

Will there be one in.177 left hand?

[@ernestrowe5061]

Hi, its on there website

[@ctom4103]

@@ernestrowe5061 Thanks Ernest, your videos have all been very helpful and very interesting 👍

[@masneobarbar573]

Hello dear, I have been watching for a long time the new products from the series FX impact Mk2 M3 please tell me to fit long bullets Slugs 40 grein thank you 🙏 in advance

[@Yi-ren-jun-tuan]

这款图纸卖吗？我想买图纸

[@llablancheHermineBZH]

bonjour seront il fabrique en 7.62 pour panthera

[@AhsvvwjwGewjabsvsv]

How to buy

[@marktemple9315]

Ernest can I get one shipped to uk?

[@ernestrowe5061]

Hi, please as BC if they ship to UK

[@ctom4103]

Hi Mark. I could do with mine shipping to the UK. Have you made any progress? The one I want is out of stock anyway but just curious. It could be a problem with it being gun parts perhaps.

[@marktemple9315]

Hi Charles I haven’t managed to get hold of supplier yet to find out but will let you know if I have any news 👍

[@ernestrowe5061]

@@marktemple9315 - bulletCentral is willing to Ship to UK,

[@franklinknisley1953]

Lexan?

[@ernestrowe5061]

Yes!

[@Ineedcoffee-n4j]

why hasnt FX fixed their own magazine? they sell a 2k rifle then pair it with a flimsy shitty magazine.

[@ernestrowe5061]

The most current mag are updated

[@rychardsertao7193]

👀👏👏👏👏

[@MasonStormSunny]

Poor design as it is impossible to insert the magazine without chambering the slug.