Esatto 7kg heat pump dryer common faults & tips and tricks

I'm filming on Samsung galaxy S22 Ultra: amzn.to/3MQlkEc
Held by ram mount: amzn.to/2MbpAEB
or
GoPro Hero 10 I got from here: amzn.to/3NMj55h
Don't have money for genuine GoPro gear, me too. I got my accessory kit here: amzn.to/3t9xbE5
Do not click here: tinyurl.com/y8...
Thank you for watching. If you like this or perhaps any other videos on my channel ( / gregyurchenko ) as a token of appreciation for all my hard work please subscribe, hit the notification bell and choose subscribe to all.

[@bloodnut822]

I have loved my dryer, which is now 3-4 years old but it has started constantly throwing the 'full' light fault before washing is dry. Like ten minutes in to the cycle! Over the last 24 hours I've restarted it the same load 9 times after cleaning out the filters and emptying water tank EVERY SINGLE TIME. I've always emptied both of the filters after every load like you said to do. After a year or so I noticed the radiator grills were very dusty but the lint around it is always wet (lots of condensation around that area). I've had to spend hours lying on the laundry floor cleaning the fins every month or so. In another video you said this was due to not emptying filters regularly, but that is definitely not the cause in my case. Being wet, the lint is wet so it's very hard to get off the fins. I've tried toothbrushes, vacuum cleaner brush attachment, fine tooth combs, even a very a thin needle to pull the lint out and down so it doesn't go back in to the grill. Please tell me how I might be able to fix the problem of the 'full' fault so the dryer will work! I've pulled the machine out and checked the hoses. There is no blockage in the external hose. Thanks

[@GregYurchenko]

Aww, I'm so sorry to hear that. To be honest with you, I'm not home appliances tech, so anything I'll hint on will be a speculation. From what you are describing sounds like a condenser fault e.g. nothing you can do... However, before you assume that you need a new dryer make sure that your dryer's drainage is working well e.g. you can see that it actually drains the condensation out. Also clean the sensor that is tacked away between filters (kind of inside between internal and external walls), it always get dirty. Sorry if it doesn't help, but I hope you get it going again. All the best!

[@bloodnut822]

@@GregYurchenko That's a great tip to clean the sensor. Can you please show photo of where it is?

[@GregYurchenko]

@@bloodnut822 When you open the front door, take the filter out. if you look down in that hole it looks like a metal knob poking out. Also, it is great idea to clean as much as you can the whole area...

[@bloodnut822]

@@GregYurchenko Great, thanks for your help!

[@tboss1111]

@bloodnut822 mine started doing this. Did you end up getting a repair person out to fix this? it's definitely not filter related and is either the water pump or sensor

[@scottday5632]

Thanks for the video. We have noticed a significant increase in lint being outside of the dryer. We clean the filters and heat pump as suggested but still find lint on top of and around the dryer. Would you know why this is happening and any possible solutions?

[@GregYurchenko]

Thank you for watching. Only guess here, but if you find an increasing amount of lint around that maybe the sign that one of the filters is not sitting properly or totally blocked. I clean both filters and heat exchanger fins after every run. Hope it helps.

[@mayankcscchannel1052]

Nice video

[@GregYurchenko]

Thanks

[@Rajuchannelforentertainment]

Well done

[@GregYurchenko]

Thank you

[@entertainmenttrice3826]

Amazing

[@GregYurchenko]

Thank you! Cheers!

[@madakamrajasekhar7804]

Amazing video

[@GregYurchenko]

Thank you

[@rickplant8055]

I'm getting whirring sound from my Esatto heat pump dryer. When I pause it, the dryer stops but I hear something still spinning for a few seconds before it stops. Is it the pump? Do you have a video explaining how to check pump? Thanks

[@GregYurchenko]

Yeah, sounds like pump. It does sound like that. Sorry, don't have a video as this is more or less sounds like normal appliance operation.

[@user-yw7iu6dk7r]

Hi I have the lace of my shorts stuck in one of the holes of the dryer drum. It seems to have gone in and done a loop. I don't know if should just cut the lace and keep using it. But I'd ideally like to loose the front shield with holes to unloop the lace

[@GregYurchenko]

Wow, sorry, no idea

[@silversystem8158]

Good video

[@GregYurchenko]

Glad you enjoyed

[@markn7533]

where can I find the moisture sensor? I find that my dryer doesn't fill up the water tank like it used to

[@GregYurchenko]

Unlikely to do anything with any sensor. You may need to clean well heatsink fins and off course all the filters.

[@joekwong9773]

I have been using it for 2 months. Recently,the dryer keeps stopping. E.g. I set to standard dry,it says it takes 1:10 to dry. it would stop after 10 min and turned itself to anti greasing mode. I checked, all the clothes are still wet. Is there anywhere I can fund the sensor?

[@GregYurchenko]

Check that all filters are clean. If they are you may need to clean heatsink fins. If all clean try to force it via different cycle like cotton extra to see if it makes any difference.

[@brendanohalloran892]

Anyone know if the fan on the front off the dryer behind the grill is ment to be on the hole time using the dryer? I notice mine doesn't spin.

[@GregYurchenko]

Not all the time for sure. It's on and off as it needs to cool a heatsink unit on demand.

[@5ammy13]

Hey my dryer stopped heating. I went out of station so I turned off the power mains. And now that I'm back I turned them on and the dryer isn't working 😢 any suggestions? I feel it's something to do with the power because it was running well before the trip.

[@GregYurchenko]

Sorry to hear, but I'm not a technician. Is it still under warranty? If not, you may need to choose between the repair and getting a new one.

[@5ammy13]

@@GregYurchenko no worries. I got it second hand so sorta screwed. Will check if a repair makes or getting a new one makes better financial sense.

[@GregYurchenko]

@@5ammy13 😞 absolutely

[@MSNIC]

Hi my dryer keeps on turning the electricity off I’m clean both filters after ever use as you said to do and I’m not overloading it It was going fine but it’s on ever load now would u know what the issue is a new dryer too

[@GregYurchenko]

The normal electrical circuit is designed for 10A. 10A = 2400W. At the peak of consumption this dryer does not exceed load of 1200W. In plain English: It is either your dryer developed an electric fault or your electrical circuit is already loaded more than 1200W that load of your dryer trips it over. Solutions are pretty easy. 1. Connect dryer for one operation to a different electric circuit (mind you, you really need a different circuit as number of power points can be connected to the same circuit). If it doesn't trip the power that means your dryer is OK and you need better power distribution within the circuit. If it trips the power then.... 2. Likely your dryer is still under the warranty. Call them and fix it up. Either way it should be easy to identify and take care of. Good luck.

[@MSNIC]

@@GregYurchenko thank you so much for your help I tried everything you said Called the shop where I bought it from they’re sending out a person to look at it I think it’s faulty when I explained what was happening they said they will fix it or replace it or give me store credit I just want it work like it was before But the dryer gods have a different plan hahahah🤣

[@GregYurchenko]

@@MSNIC No worries at all, I'm here to help as many people as I can. Glad it was useful to you. Good luck!!! 🙂

[@derekauret8574]

I got the faulty full problem as well

[@derekauret8574]

fixed, it was the sensor inside the first filter area needed cleaning, thank you Greg.

[@GregYurchenko]

You're most welcome. Thank you for watching. Glad I could help.

[@blakeknapping4252]

​@@derekauret8574HI Derek, I also have this issue! 😢 Can you please explain what sensor you are talking about?

[@mohammadraza158]

Nice

[@GregYurchenko]

Thank you

[@philemonmuriithi3224]

wonderful

[@GregYurchenko]

Thank you! Cheers!

[@francistaylor1822]

The comments look strange, all one or two words without content...

[@GregYurchenko]

Yes, not sure what happened there🤨. Hope the video was helpful to you. Thank you for watching.

[@muhammadzohaibsadaqat2502]

good video......

[@GregYurchenko]

Glad you liked it!

[@LIONY325]

does it make big linen into a ball?

[@GregYurchenko]

Yes and no. Most of the time dries perfectly, the other time leaves a couple of wet patches. If it does I untangle it and start again (doesn't take long to finish). Hope it helps, thanks for watching.

[@grantkahale8933]

Hey play start button not working? Any ideas it's like the door isn't closed

[@GregYurchenko]

They have 3 year warranty. Is it out of warranty?

[@grantkahale8933]

@@GregYurchenko yes out of warranty

[@GregYurchenko]

I can see only 2 ways to go about it... 1. Call in service to check and quote for repair. 2. Get the panel off, verify that start/play button is faulty and order the new one. Sorry, after all there is no magic with faults like that.

[@asjeot]

Does this dryer reverse tumble?

[@GregYurchenko]

Just for 20 - 30 second once a while

[@jalindarc8108]

Good

[@GregYurchenko]

Thanks

[@ghufrananees888]

stay bless

[@GregYurchenko]

Likewise

[@santouchesantouche2873]

It's a shame you cant remove the condenser to wash it. Bosch has a self cleaning condenser which uses the water from drying the clothes to back flush

[@GregYurchenko]

Thank you for watching. Yes, there are surely better appliances than Esatto. At this price point I don't mind cleaning it once a while. Especially when reported lifecycle of Bosch, Samsung and Esatto reported to be very comparable.

[@santouchesantouche2873]

@@GregYurchenko fair point. I have a condenser dryer and you can remove the heat exchanger to rinse all the crud out. So I light brush and vacuum will help but let's be honest it will be full of stuff. It's a design flaw imo. Should be able to remove it to clean

[@GregYurchenko]

@@santouchesantouche2873 Absolutely! No doubt about that! Surely they need a number of ways to reduce the cost. This is one of them. I'm just glad that as consumer we have a choice. Again, thank you for watching and commenting. Real appreciate it!

[@makeupwithragini9026]

Information

[@GregYurchenko]

Awesome

[@angeeragond4429]

Very nice

[@GregYurchenko]

Thank you

[@sjja2715]

great

[@GregYurchenko]

Thank you

[@dasucheeduru3454]

Exllent

[@GregYurchenko]

Thank you

[@rahmanchannel4351]

Good luck

[@GregYurchenko]

Thank you

[@lukiejames]

Uncut 😂😂😂😂😂

[@GregYurchenko]

♥️

[@ImARBOY]

Hlo❤️👍

[@GregYurchenko]

Thank you

[@sidrausman3489]

Amazing video

[@GregYurchenko]

Glad you think so!

[@fouziakhan8525]

Nice video

[@GregYurchenko]

Thank you

[@solamonsaju7266]

Nice

[@GregYurchenko]

Thanks