in 2:19 you mentioned the tilting motion of the internal box... that tilting motion is for people that don't have a 100% leveled tank and need to adjust the leveling on the box to get even water flow.using a rubber gasket, rubber Washer or a drop of acrylic solvent cement once you have it set to the perfect level. in 3:07 you showed us the Foam insert for the "back Box" and the noise reduction tube... I agree with you about NOT using the tube but I have the foam insert on to pick up any "Large Trash" and instead of cleaning my sump's filter once a week, I clean out that foam every night about 10 minutes after feeding the fish and and before the filters turn back on. in 5:50 you mentioned that you had trouble with priming the U-Tube for the back box... You should be able to remove at least 75% of the air from the tube with the airline tubing. what I do to get it 100% is get it going with the airline tubing in the U-Tube and once the water starts flowing it will push the air bubble to the opening of the airline tube where you will be able to suck it out OR just stick the overflow boxes unto your tank sideways until the two boxes "AND the U-Tube are full" , straiten them out and lift them out of the water and the back box, the internal box and the tube will be filled and the tube WILL be primed 100% ;) The only problems I've had with those types of boxes are simple fixed problems. The first is that the back boxes on most of them don't give you enough space to place two U-Tubes into it and the second problem would be that the internal box's baffle is not open all the way up to the top to empty the tank if you get too much water flowing into the tank all at once. but in case of Emergency I don't have to worry because I had enough problems with those boxes that I (NOW) have two overflow boxes in every tank so that I never have to worry about the tubes getting clogged
@truevillain77883 жыл бұрын
Wow
@swamppnus3 жыл бұрын
They sell 60$ sensors that’ll shut off your pump when the syphon breaks and display starts to flow. Good thing to have as well, 2 overflow idea is also cool
@MilkSpotsCauseMeToSpazzOut210 ай бұрын
@@swamppnusdo you have a link to the sensor ? If so can you post it here..
@MilkSpotsCauseMeToSpazzOut210 ай бұрын
Thanks man seriously that was some good info
@ryanrussell96706 жыл бұрын
There is an air bubble because your aerated water from the sink is feeding it bubbles 🤦🏻♂️
@patterdalezipsuzilil5 жыл бұрын
I also fitted a bleed valve with a tap in the top of ubend if you send the bleed tube into the exiting water on outside of overflow box it pulls the air out perminently without using an aqualifter
@thechaun5 жыл бұрын
Your silencer is upside down, the clear acrylic tube is supposed to be up in the air, not down in the bulkhead.
@angelachan16184 жыл бұрын
I am using this PF 300, I usually just shake side to side up and down to get the air bubble out, it works great with my 75 gallon tank.
@ritesha80503 жыл бұрын
Does is fail or is it reliable
@severin11363 жыл бұрын
thinking of getting this one too. Do you have a standard 75 gal aquarium?
@ritesha80503 жыл бұрын
@@severin1136 ima build mine. I m using a pump of 6000l/h. I can't spend $350 on overflows😂😂😂
@severin11363 жыл бұрын
@@ritesha8050 🤣 lmao. Did a little more research on hang on back overflows and I am gonna try this on my 75 gal
@ritesha80503 жыл бұрын
@@severin1136 I'm going to build mine. Might cost less than$50
@MrGrantdw6 жыл бұрын
Do not put oil any where near plastic it will cause it to perish and go brittle use ptfe plastic safe lubricant.
@Deon0026yickadee7 жыл бұрын
I agree only one wing nut come on man: but..... overall that joint looks nice and solid I agree again. Thanks for sharing I can’t wait to hear the full review.
@Deon0026yickadee7 жыл бұрын
You’re good with a tape!
@jdofishtank60187 жыл бұрын
Deon 0026 Thanks
@anthonyromano54206 жыл бұрын
What’s the purpose of the acrylic pipes that are glued to the pvc? Mine broke off not sure how important they are
@jasondoherty36132 жыл бұрын
did u ever get an anwser
@anthonyromano54202 жыл бұрын
@@jasondoherty3613 nope
@patterdalezipsuzilil5 жыл бұрын
It won't work testing it like that it needs the pressure of the tank volume and works on how much return flow from sump I have this and a don't have thd air lock in u pipe
@karennation35805 жыл бұрын
What is this for? I am a newbie wanting to start and hide a filter. Its just a 10 gallon tank in corner of kitchen and i want o do a saltwater reef. I like things tidy. I dont want things hanging out. I am painting back black and thought of buying a hagger I thik, it called its submersible and has a spray bar and doubles as a powerhead, so (tidy) would blend in with black background.. I thought of buying a used one with a stand and could put a canister. I saw some clear pipes. Can I use clear pipes and tubing. Just anyway to keep things tidy. I don't know if I need a skimmer, i heard someone say that nanos relied on water changes so not necessary. I also heard of a HOB refugium. I have a 2inch space behind the 10 gallon thats painted black. Should I get a refugium, or maybe later down the road since I am such a newbie, and i think he had a skimmer in a refugium, so maybe I would have to change water once a week. Thanks for any advise
@jdofishtank60185 жыл бұрын
Karen Nation This is an overflow system for a sump. I’m no saltwater expert at all as I’ve never kept saltwater fish. But from everything I know a 10 gallon is too small for saltwater. And if you’re new to the aquarium hobby you may want to start with freshwater
@Capt_Billy4 жыл бұрын
How did you silence this monster? It is loud!
@djlancer882 жыл бұрын
So I have on of these overflows but do not have that piece of pipe to quite it down. What exactly is it? can I make one?
@jdofishtank60182 жыл бұрын
You could, or add a small piece of sponge
@yeayea24992 ай бұрын
I know im late but did you do this before you built your own?
@jdofishtank60182 ай бұрын
@@yeayea2499 yes
@OceanAddict4 жыл бұрын
I need your help, I have a 30 gallon setup (26 gallon main tank and 7 gallon sump) I have a 370GPH return.... Can you let me know if I should get the PF-300 or the PF-800? Really appreciate the help as i am thoroughly confused
@ericlind65816 жыл бұрын
you can easily remove air in the pipe by lowering water level and then pouring a lot of water all at once into one section. This forces a large rush of water thru the pipe and flushes out the air. Much easier than sucking out air from a tube.
@jdofishtank60186 жыл бұрын
Thanks
@ericlind65816 жыл бұрын
JDO Fishtank I discovered a better method. Bought two rubber plugs from Lowes for $2. fill tube up full and plug up ends under water so no bubbles present at all. Then deploy tube and remove plugs. Easy! if space is tight to retrieve plug, simply drill a hole in it or screw in a small screw and tie it to a string so it can be pulled out.
@Avoiderrors Жыл бұрын
If shake the tube it will get rid of the air bubble no need to drill.
@PhiCongDoan75874 жыл бұрын
Thanks for the video. Did you ever do the video with the tank and sump?
@jdofishtank60184 жыл бұрын
Yes
@ritesha80503 жыл бұрын
What’s the max flow rate it can handle
@yeeeentertainment82986 жыл бұрын
I agree with oiling the nut to adjust the level. I got the 1000
@jdofishtank60186 жыл бұрын
Thanks
@anthonyromano54206 жыл бұрын
Do you have a video on how you added the air line? Did you use silicone to attach it?
@jdofishtank60186 жыл бұрын
I originally used silicone but it didn't hold, now the airline is just pushed through the hole. Works.
@anthonyromano54206 жыл бұрын
JDO Fishtank thanks man!
@terra246811 ай бұрын
looks good👌
@davidsfishtanks93477 жыл бұрын
never used one before looks neat
@jdofishtank60187 жыл бұрын
David's Fish Tanks Thanks
@joec21743 жыл бұрын
PF 800 has two wing nuts !
@brad8236 жыл бұрын
I have a 1800 I used for a few months, double tube style of course. My complaint is that no matter what I did I could NEVER keep air from building up in the siphon tubes. ( the water flow into the intake box causing at least some bubbles, adjusting that box did not help at all) After a some months of using it I determined there is no way I can TRUST it not to break siphon on me, a potential to cause a disaster! So I removed it and reconfigured my whole aquarium set up.
@ericlind65816 жыл бұрын
Brads Tropics The air comes in because of the falling water from the overflow slots that create micro bubbles that eventually aggregate and build up. What I did was I removed the overflow black box, put a sponge at the end of the siphon tube (to prevent fish from getting in) and put a plastic tall bottle into the external compartment that was cut to overflow at the right water level. Then the siphon goes direct to this bottle which then overflows at the right height. No more bubbles. Basically I moved the overflow action to the external side where bubbles don’t matter.
@mikesb69-876 жыл бұрын
You need a stronger flow pump to push the air bubbles through the tube.
@ericlind65816 жыл бұрын
Mikesb69 - true but hard to know how much stronger is needed. I suppose you can get an adjustable flow rate pump but they are costlier. I like my solution better as it removes stuff from the tank.
@xelitegaming4ever5 жыл бұрын
Eric Lind can you post pictures somehow?
@jacobkeller295 жыл бұрын
Would you recommend just making one of these on your own, rather than spend the money?
@jdofishtank60185 жыл бұрын
Jacob Keller You could, but you need to the geometry correct
@boostedbadboyzx12r315 жыл бұрын
By the time all is said and done, you could have just bought it for the price
@metenrog6 жыл бұрын
This was very helpful. Thank you!
@jdofishtank60186 жыл бұрын
Patrick Gornet no problem
@tmartin23474 жыл бұрын
Once you have the black box adjusted to proper height, lay a thin bead of super glue on the top, similar to a bead of caulk.
@pamelaalexander64214 жыл бұрын
GREAT review! Thank you, I completely understood everything you said!
@jc49fishniner4lif77 жыл бұрын
Cool I hope you show it when is your tank,, thanks for sharing
@jdofishtank60187 жыл бұрын
George Calderon Will do
@charsiedward64436 жыл бұрын
Do i have to suck air all the time ? Anything that can prevent that issue?
@richardportelli19836 жыл бұрын
Definitely looks 100 times better than a traditional overflow weir and gives you more room in the tank!
@jdofishtank60186 жыл бұрын
Yep
@TheBMH284 жыл бұрын
OMG do not drill the U pipe .......................... read the instructions, you will void the warranty, just place air line tube up the pipe and suck.
@rob93aquatics7 жыл бұрын
Looks like fun ahead can't wait...🐠🐠🤙🤙
@jdofishtank60187 жыл бұрын
Rob 93 Thanks
@samuelbrooks81995 жыл бұрын
Your wing nut is on the wrong side. I did the same thing at first.
@JohnnyRelentless6 жыл бұрын
I think you have the screw backwards, don't you? I doubt the head of the screw is supposed to be against the aquarium. Harder to adjust that way. Also, if it was me, I'd definitely use that sponge. The more surface area for beneficial bacteria the better, right? Having said all that, I'm not even really sure what an overflow box is, so take everything I said with a grain of salt.
@joec21743 жыл бұрын
Glue rubber drawer stops at each end . Don’t glue the overflow box to itself .
@Tht.TallTech7 жыл бұрын
Nice video!
@jdofishtank60187 жыл бұрын
MK films Thanks
@tomasmurphy71225 жыл бұрын
Here is the solution for the air bubble instead of drilling the tube. kzbin.info/www/bejne/rHW1iqWDm9p6gNE
@damiansgaragebuilds76633 жыл бұрын
The bubble wouldn’t go away because the faucet was creating bubbles
@lanphanh4 жыл бұрын
I think they over price for this box
@keepin_it_reel_fl69924 жыл бұрын
I got this box brand new for 35 bucks at my LFS
@coolgeorgiaboy6 жыл бұрын
The kitchen sink is causing the bubbles
@anthonyromano54206 жыл бұрын
Good points. Thanks for this video super helpful.
@Frank1joker7 жыл бұрын
Nice!
@jdofishtank60187 жыл бұрын
Thanks
@truthfactreality68143 жыл бұрын
Put it in corner. Can’t be moved then by fish hitting it
@hanzen9997 жыл бұрын
Add airline tube first to suck up the air. Don't drill it. It ugly 😂
@jdofishtank60187 жыл бұрын
Ady Yanto Too late lol
@hanzen9997 жыл бұрын
JDO Fishtank hahahaha. Sorry late to comment 🤣
@jdofishtank60187 жыл бұрын
Cuba Auto Sales, LLC I tried all that, nothing worked