This video walks you through process of servicing your Espar furnace on your tool truck. Any filters and adomizer screens you may need can be purcased at summitbodyworks.com or call 866-514-8184.
Пікірлер: 65
@robertmencl91696 жыл бұрын
Clearest oration and presentation of any how to video.
@jeffallbright44495 жыл бұрын
One of the best how to videos ever produced. Atomizer screen and fuel filter was $13 so it’s a cheap fix. Thank you for the information, saved me a pile of cash!
@dmj615110 жыл бұрын
Great tips, thanks for posting it
@shanegronvold57626 жыл бұрын
Another common smoking problem and not starting is the gasket inside under the burner assembly. They will split after awhile. The heater is quite easy to disassemble so once a year I totally take it apart and replace gasket and blow the burner out and change atomizer screen and fuel filter. I find doing preventative maintenance before the cold weather hits is much better than being pissed off and freezing in a cold truck.
@dejavu40635 жыл бұрын
Thanks
@andrebias61826 жыл бұрын
God bless you for making this video.
@dmwi15493 жыл бұрын
Great information. Thanks for posting this in 2013. Watching in 2020. I’m going to refer back to this in the future. What is the recommended service interval for filter, atomizer screen and brushing/picking carbon? Do you go by total hours run or calendar? Obviously fuel quality will vary and so will interval. Just asking because I just installed one in my travel van. Is there also a service interval you’d recommend for complete disassembly to fully clean and inspect the burn chamber? Thank you.
@sweetpadre4 жыл бұрын
Looking forward to being warm again. Thanks.
@danielmiller47945 жыл бұрын
Money money money money that’s all that was designed for
@rami5986 Жыл бұрын
Any one can tell me what to do if I’m getting overheat code 13
@jasb782 жыл бұрын
why not just spray the burner with parts cleaner?
@odairtaveira56754 жыл бұрын
Great explanation thank you! I do have this problem! Smoke when turn on and then the smoke goes away!
@stevendan98782 жыл бұрын
I damaged the glowplug hole thread while trying to remove that screen 😭😭😭 is there anyway i can rethread that hole so i can screw the plug back in
@AJ-qn6gd Жыл бұрын
A machine shop can fit a helicoil thread insert for you or you could do it yourself if you’re feeling adventurous 👍🏻🇬🇧
@Swallabat6 жыл бұрын
Excellent teaching. Thank you.
@johnwyman63315 жыл бұрын
Any way to remove the inlet fuel filter and install an inline fuel filter from a riding mower or something?
@sunnydhatt96143 жыл бұрын
I put new glow pin new screen new fuel filter cleaned the air intake hole but the heater still blows white smoke!!! What should I do?
@nelsonnarciso17914 жыл бұрын
Great video. I have a d3 unit that was smoking bad and fuel coming out of the exhaust. Replaced unit with new still getting smoke. Not S much still smoking is that due to the flex exhaust pipe possible dirty inside. Or can a bad dose meter pump make it smoke also.
@erhanezer48553 жыл бұрын
thank you for clear explanation and all detail.best way the thanks trucker.we will save lot of money and covid time hard the get mechanic to fix our problems
@sidhuamanz3 жыл бұрын
Nice video, my heater start then stop after few minutes and says fan stopped working, fan work all the time but when massage pop up then it started, if anyone can help
@gettingtheredonohue61584 жыл бұрын
Cool vid my heater starts up then shuts down it said error 6 I have checked everything even the motor on a 12 volt battery that's fine I don't know how to fix it
@cbcarper96813 жыл бұрын
👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍
@hookahb82994 жыл бұрын
Thank you for a very informative video!
@cp2974214 жыл бұрын
Please do a service on d5scw. Mainly correct way to install atomizer screen. Where the welds should be pointing.
@philkong26424 жыл бұрын
Do you think you could use a butane torch (i.e mini creme brulee torch) to clean out the carbon build up in the burn chamber?
@bobo28denmark6 жыл бұрын
Thanks a lot. So helpful.
@johnnybattlelife3 жыл бұрын
Im getting a H1 service message on my espar, any suggestions? Thank you
@tomwestermann81673 жыл бұрын
I had the same message during the extreme cold snap we had here with overnight temps of -31 F. My Heater died just as it was speeding up after startup. I believe it was due to the low voltage shutdown. Even though I run the heater off a new (fully charged) dedicated 100ah battery the startup procedure used so much power from the weakened battery (due to the extreme cold) that it shut dow. I kept the battery indoors last night and had no problems this morning. Apparently there is a way to adjust the shutdown voltage, but I have not been able to find out how to do that with the Easystart controller. Anybody know how to do that?
@wallacegrommet93436 жыл бұрын
My heater has performed flawlessly on my sailboat for five years but smoking at start now. Time to change the screen; did the filter already last year.
@nathansmith82824 жыл бұрын
Can I use carb cleaner to help get atomizer screen loose?
@MyGoogleYoutube3 жыл бұрын
Anything different for a B4?
@Familyfun20064 жыл бұрын
Mine started saying no flame detected what is that mean
@paulbarnes89626 жыл бұрын
Very useful thanks!
@josephanderson474 жыл бұрын
Where ur shop im having same problem
@gmanrior5 жыл бұрын
What size is that steel brush do you have and where did you buy it? Amazon has them just wondering the size to fit in the camber hole..
@dejavu40635 жыл бұрын
You can go & buy a variety pack from harbor freight & tool with various sizes under $10.00 stair step sizes of 4 or 5 maybe 6 I was too lazy to lift my bunk & see.
@wesleycartwright25813 жыл бұрын
Great video, thanks
@Wild.win.4 жыл бұрын
Any one know where to get fuel pump for a Chinese heater in Oregon
@barrysoutthere4 жыл бұрын
China. Alibaba, VVKB
@stonenpebble8 жыл бұрын
A very helpful video. just ordered my new screen and tool and now know exactly what to do. Thanks. my heater starts and doesn't smoke but stops after 15 mins and been advised after changing the fuel filter that it could be the screen so going to try that before replacing any sensors.
@MYY11115 жыл бұрын
How large of a wire brush works well?
@GenXFarmer775 жыл бұрын
Ok wheres the filter?
@alertgps76515 жыл бұрын
I have an Eberspacher, version: D2. It sometimes, throws heat and sometimes it doesn't. I did notice that one ones it did throw out white smoke. Ever since then it's a bit of miss when I turn the heat on. Any suggestion?
@havenmeesteryakan20155 жыл бұрын
Albert Gps Dit you even look at this film
@dejavu40635 жыл бұрын
I have the same problem I'm about to do a filter replacement as I've seen on this video and hoping that would resolve the problem plus check in the burn chamber and break it down even further and clean out the burn chamber as I seen another videos
@dejavu40635 жыл бұрын
@@havenmeesteryakan2015 lol
@kafi24645 жыл бұрын
thank you Brko
@allywilkeforsenate6 жыл бұрын
Pos 'S should be maintenance free for 1000 bucks.
@tylersnider34796 жыл бұрын
thats like saying i shouldnt have to change my oil because i spent 30 thousand dollars on my truck.
@dejavu40635 жыл бұрын
That's like saying when I use to have a woman I put so many sex miles on her body that I'm a professional now and since I'm single now any woman l choose to step to now will have me because I'm a professional.
@c.a.mcneil75994 жыл бұрын
That's like saying why to I have to buy tires. Wait it's also like deer crossing sign they should not be on highways so the deer does not cross a busy highway.
@stevensvideos59184 жыл бұрын
That's like saying "my ass is red raw from from my homemade wooden dildo, it should cost 100O Bucks".
@quinni3b5 жыл бұрын
How long does it take to service these two items?
@adam2eve5 жыл бұрын
It takes me about 45 minutes to an hour to change the screen. I know some might do it faster, but that's how long it takes me. It takes me about 15 minutes to change the small fuel filter. located by the fuel pump, outside of the truck. So, all together, by the time I clean up and put tools away, about 1.5 hours labor. I've been doing this for several years now, and I usually service it once per year. But, the last time I did it, I went two years, because I did a lot of running in warmer states during those winters, and wasn't using the Espar as much. The fuel screen was pretty black by then, but to my surprise the burner screen was in pretty good shape. There was very little carbon build up, and it came out of the hole fairly easy. Hope this helps some. Trust me, this is time well spent. If you do this regularly, your Espar will always fire up (without the huge clouds of white smoke poisoning everybody in the truck stop) and keep you warm. Good luck.
@CashNYC6 жыл бұрын
Mines don't even come on all of a sudden it stopped working.
@CashNYC6 жыл бұрын
Fixed it the fuel pump was plugged out
@Speedfreak19847 жыл бұрын
Great video, keep up the good work!
@dan_youtube8 жыл бұрын
very clear and helpful video. thanks
@kevinneil44045 жыл бұрын
I've searched for a clear and informative video. This is the one
@tonycarey18087 жыл бұрын
That was a great video - yes indeed it helped a lot!
@scp84126 жыл бұрын
your awesome! thanks for this
@RumbleTouchDroid6 жыл бұрын
Samuel Chenelle *you're*
@CampervanCulture.com-Official8 жыл бұрын
Thanks for this video. I was just going to pull my heater apart as it was smoking loads on start up and cutting out. It would start up with the engine running though. It was the little filter in the pump that needed a clean like you said. Thanks again. Jed