Espresso with Kin Grinder K6 and Commandante C40 | ASK Coffee Roastery | 32 Seah Street

[@anonylesss]

i just pulled a shot with a lever machine as well - Flair Pro2 and the K6 - 20gm medium roast at 37 clicks. it took 44 seconds to 41gm out. i think it takes me about a minute as well to grind 20gm

[@dvs3308]

Very nice review!! I purchased the K6 a couple of weeks ago. Used it on holiday with my V60 kit. And now using it at home with my LaPavoni and with the Moccamaster (since I'm still waiting to buy a new electric coffee grinder, most probably DF64V or DF83). I love the K6. It feels really good (better than my Commandante from which I never liked the glass cup). I prefer the taste of the K6 over the Commandante. To be honoust, I'm doubting if I still need to buy an electric grinder 🙃.

[@CaffeMartellaSingapore]

i think you will need as after grinding 2 espresso...my arms arw aching😂😂😂

[@dvs3308]

@@CaffeMartellaSingapore Free workout 🙂

[@wytties3399]

i have df64v and thinking of buying k6 to have something to compare shots🙃

[@CaffeMartellaSingapore]

its a good conical grinder to have to vary the tasting notes between flat burrs and conical one.

[@dcseah]

​@wytties3399 I have both and pulled a few shots on my BDB from the K6. Grind output is very consistent and definitely comparable in quality to the output of the DF64V. Tastes will be slightly different as CY had mentioned as it is a conical vs flat burr.

[@snazpizaz7706]

Hi - thanks for this K6 focus - i see you are demonstrating the newer K6 model with the smokey /opaque hopper lid - are you able to tell me the diemensions of the grinder - height, width and handle lenth at all ? cheers !

[@morgant6508]

For espresso or around espresso (turkish coffee and moka pot or aeropress I think); the Kin grinder K4 isn't better ?

[@CaffeMartellaSingapore]

This test for eapresso grinding i will.do a separate video on it.

[@YPStudioBrunswik]

waiting for your comparison video of k4 and k6 🙏

[@nyang1010]

Grind size 1 in comandante?😮😮😮 Manual says espresso grind size should be between 7 to 15.

[@CaffeMartellaSingapore]

haha. in my case i have to grind at size 1.😂😂. tmr i will try at slighty higher grind setting.

[@bernardvantonder7291]

@@CaffeMartellaSingapore sounds like it is not zeroed/calibrated

[@russman6577]

Hi there, you didn't actually tell us what grind click (from your 0) that you used on the K6. I think I could see based on camera angle that you were at 41 or 42. That was a pea berry, medium dark roast, right? Elevation and origination? Process? Thanks!!

[@CaffeMartellaSingapore]

i will try to do that in the next video.