Essential Tools For Appliance Repair Business!

For my Appliance Repair Business Course,
click here ---- www.applianceprofit.com/Start
Below are links to every tool that I carry in my toolbag for my Appliance Repair Business!
Klein Tool Bag: amzn.to/3R9Q0oX
Fieldpiece meter: amzn.to/3sGtw4T
Dewalt 90 degree: amzn.to/485hH8w
Dewalt razor: amzn.to/3P3ZtMc
Needle leads: amzn.to/47YZzx3
Temp thermocouple: amzn.to/483vEnn
Electrical tape: amzn.to/3P2JCgN
Venom gloves: amzn.to/3LafRcG
Non contact voltage meter: amzn.to/3EsaP7J
Outlet tester: amzn.to/45XPdMd
Gel filled wire connectors: amzn.to/44KZRER
Channel lock pliers: amzn.to/484ZAzu
Side cutters: amzn.to/3Z7uKm3
BEST wire crimpers: amzn.to/3ZcwEBJ
Wire strippers: amzn.to/3PdnbFU
Puller tool: amzn.to/3PdnbFU
Impact driver kit: amzn.to/3PrY9nK
Puddy knife stiff: amzn.to/3Es1n45
Inspection mirror: amzn.to/3Z3uSmu
Mini ratchet kit: amzn.to/3Z6PHgJ
Nut driver kit: amzn.to/3RcVSxR
6n1 tool: amzn.to/3r9RF3g
Microfiber towels: amzn.to/3LfKJIP
Torpedo level: amzn.to/3Z6wprV
Adjustable wrench kit: amzn.to/3PpV87b
Infrared temp gun: amzn.to/484pZxC
Subcompact impact driver: amzn.to/4850JqM

[@theapplianceprofit]

Wanna find out how much money you could possibly make with Appliance Repair? Check out my FREE PROFIT SIMULATION at www.applianceprofit.com/FreeProfitSimulation

[@MrMultitool]

That tool is a tack puller. You're right ,it comes in handy to pry and lift connectors.

[@theapplianceprofit]

Thank for clearing that up! Now I can quit calling it a "crows foot"! Haha 😂

[@mavenfeliciano1710]

You revealed one of my secrets. When even the 90° tool doesn't work I use the micro wrench. I usually use a larger (like double sided) bit instead of the short ones to make it easier. If its difficult I use my other hand to apply pressure. Also another secret, I keep the 90° angle drive adapter at home and use the dealt pivoting bit adapter. It locks onto 180° (keeping it straight) and when pushed out it moorings to freely rotate up to 20° I think. Its only slightly larger than a traditional bit holder saving a bit of space and bulk, and work 95% of what the right angle adapter does. It does start to jamb over time so I keep a small hammer or pliers I tap with to get it loose. Still worth every penny. *edit* I had paused the video to comment but after resuming I noticed one in the bits box. I guess it's good to carry both but when carrying it around with other essentials as I do, it makes a difference to cut down on bulk and weight.

[@theapplianceprofit]

Yeah I love that little tool! And you are right about cutting down on bulk and weight, my toolbag is pretty darn heavy!

[@ww45818]

That NC voltage meter can save your life. Had a fellow appliance tech go to check a washer and dryer and the dryer was shorted and had voltage going through the entire dryer. He didn’t know that, he went to look behind the appliances, put one hand on the dryer and one on washer and made himself a path of least resistance. He died at the customers house unfortunately. So before I touch an appliance, I use that volt sniffer to see if an appliance is shorted by any chance.

[@theapplianceprofit]

Man, sorry to hear that! Yes it is an awesome tool

[@NewLineApplianceRepairllc]

Steady is the key to success and patience just like anything business. Good days and Bad

[@blakkmontana7699]

I’m glad you back man

[@senioradvocates3262]

So much better when slowing down on speaking. Watching an earlier video where many words are repeated made it very hard. Like “I say, I say…”. You can tell you slowed down a lot. Much much much better. Keep up the progression and you’ll be crushing it!

[@theapplianceprofit]

Thank you! Sometimes I talk fast and almost stutter my words! 🤦

[@ryk1265]

Your FIELDPIECE SC260 multimeter (personal favorite) has the NCV feature that function exactly like your KLEIN non contact voltage stick.

[@theapplianceprofit]

Yeah it does. I guess I never use that function because of the size of the meter. Alot of times, I use my little non contact to reach behind dishwashers to see if the recirculation pump motor getting power! But yes they are all so handy

[@89DrFunk]

Man from looking at your video I thought you stole my tool bag...LOL. We have the same bag with the same tools but with different brands of course. I have the same fieldpiece meter love that bad boy. I need to get that Y pry tool that you have that will help a lot in the field. Great video!

[@theapplianceprofit]

Hahaha that's awesome! I guess that just confirms that everything in that bag is sufficient for repairing appliances!

[@justmakeingit]

Great video can’t wait to see the special tools in the van I have my feet wet I guess you sort of say in the appliance repair being a local handyman but there are no more appliances repair people around me so was thinking of doing some schooling to get involved more in the trade

[@daltonhutcherson2999]

i have the same klein bag as an apprentice and i love it!!

[@theapplianceprofit]

I love mine too!

[@michaelschuster3848]

Very informative

[@philliphall5198]

If I was 20 I would get into this field and learn to repair them Seems to be a lot of work and the junk equipment you can get cheap and fix for resale also Lots of old stuff setting out side homes free also

[@theapplianceprofit]

It's not really alot of work. Alot of repairs can be made very quickly with high profit!

[@pajo2012]

Great video,I've gone back to using 12v impacts. They are way smaller,lighter, cheaper,and still have plenty of power for appliance work.

[@theapplianceprofit]

That's true!

[@sullivan9191]

Keep up the videos man!

[@theapplianceprofit]

Thank you! Any ideas on what you want to see next?

[@rzhunzhu1066]

👍👍

[@rayhaglerpiano]

Thank you What are those gel type connectors you showed for the humidity/moisture control on wires?

[@theapplianceprofit]

That's exactly right! And then that keeps the wires from corroding and becoming a bad connection.

[@dancinglightning1987]

Nuice 👍

[@shadmoney6617]

Great video

[@theapplianceprofit]

Thank you! I will upload a van tour soon!

[@shadmoney6617]

@@theapplianceprofit Looking forward to it. Speaking of vans, do you think a dodge caravan would suffice starting out if I took the back seats out? It is all white so I figured it would look pretty good with magnets on it. $4,000 grand is my budget. Would that be an acceptable start in terms of professional image?

[@theapplianceprofit]

Yes it would! When I started off, I used my Z71 single cab truck... gotta do what ya gotta do! 🤷 my truck was black tho and I feel like a white service vehicle is the way to go. Most service vehicles are white so it gives that clean, technician kinda feel. So you will do fine with that van!

[@shadmoney6617]

@@theapplianceprofit Definitely thank you for the vote of confidence!!!

[@showxating9885]

13:59 Panel tool

[@theapplianceprofit]

Thank you! 😂

[@theapplianceprofit]

Thank you! 😂

[@bukursglass6990]

Hey boss just bought all the tools in this video, also tools to do sealed systems, I really wanted to specialize in refrigerators , I got a trailer, so I can go and pick them up and even store a few, my question to you is, do you think doing sealed systems on drives is a good idea? Like fixing them and then flipping them, once I get more familiar with appliances I want to start a repair service

[@theapplianceprofit]

Yes I think that's a great idea! That would be my goal, is to get good at sealed systems. If you are good at sealed systems, your gonna kill it!

[@bukursglass6990]

@@theapplianceprofit thank you man!! Im excited, I just need to learn how to find the fringes at a better price 😅 I bought my first one for 200 and am putting quite a bit into with replacing the compressor and all

[@theapplianceprofit]

I agree! I wouldn't want to have to pay that much for each of them. $50 or less would be awesome.

[@bukursglass6990]

@@theapplianceprofit that’s the new goal, I learned so much on that first buy haha , hopefully I can get a thing going where I can locate fridges that need new compressors specifically , I was surprised to find out that appliance techs are rare but sealed system techs are even more rare, at least in the appliance world , I’m working on getting my 608 certification rn

[@theapplianceprofit]

Exactly! R600 is becoming more and more common.

[@philliphall5198]

Who do you buy the replacement parts from, most are really high price, but Amazon has fair prices most of the time

[@theapplianceprofit]

My favorite company to buy from is Marcone.

[@HereOnYouTubeCommenting]

i just had 2 refrigerators fail in 2 weeks, got the boards out to do basic component checking and i cant read anything on any of the boards, it looks like they put some layer of liquid or some wax film over everything so my meter prongs wont touch the component legs to read anything,. What do you do in that situation when there is a coating over all the compenents and the back side where the solder joints are ?

[@theapplianceprofit]

Yeah you are right, they do sometimes put a gel coat on them. You would need to make your tests at the connectors. Back probe wiring or disconnect the connector.

[@HereOnYouTubeCommenting]

@@theapplianceprofit well to check components i need to get to the component legs but i cant because they have that thick gel coat over everything. If i don't have voltages at the harness outputs, something is wrong within the components that i need to check but i cant ... Not without using some kind of knife or something to scrape that coating off but thats a lot of work to trouble shoot down to the component level when you got that gook all over it ...

[@theapplianceprofit]

Oh I see, you are wanting to test board level components. Yeah, most appliance repair companies don't perform board level repairs, we just replace the entire board when we determine the board is at fault.

[@HereOnYouTubeCommenting]

@@theapplianceprofit Well i had to trouble shoot 2 of them 3 weeks ago and one board was clearly bad, as i opened the panel i could smell burnt components, 5 poped caps, 2 burnt resistors and one burnt voltage rectifier. That was an obvious board failure. The other was appeared to be fine, no obvious bad components, but when you power it up, you could hear a relay clicking on and off and an led light blinking to the relay click on and off, the inside fridge light was also blinking to the relay, so was the thermostat control panel ... After un-plugging 3 times to try and reset, nothing, still kept doing the same thing so i un-plugged all the harness' and powered back up and same clicking issue so i said its done, needs a new board.

[@theapplianceprofit]

Want my FREE COURSE? www.applianceprofit.com/FreeAccess

[@johnwoo9247]

That a heavy tool bag

[@theapplianceprofit]

It's really not bad at all. I put it on my back and can still tote parts and other such things with no issues!