7 Channel

[@JHEpon]

I don't know why people do not view this videos...awesomee👍👍👍

[@raheelkhan9518]

My dear, for watching only video, this video is perfect. But for implementing its not good. You should explain the parts also. All parts.

[@camplays487]

@Internet Gamer'z 360 that’s not an explanation, its a list

[@x-6790]

don't talk like idiot

[@kevalproject5164]

Nice vedio ...Mai bhi aisa hi project banaya hu

[@mrigankasingha3674]

Very good project I liked it

[@EtDiscover]

Thank you

[@EasyOne]

Nicely done

[@_titasroy_]

From which state you are

[@naola6456]

Excellent project. But I'm unable to download the schematic diagram, it's not found!

[@TechKiClass]

How can i make it

[@amankumarsharma1672]

Which camera you used to make videos

[@darshandongare4359]

Can you please make one more transmitter and receiver but of 14 channel. Bro please make it we all are supporting you . Please please please . This was very nice and beautifully made . Your videos are awesome . Please make it

[@surajsingh-wb5wj]

What rf module will be use if want to increase the range and libe streaming camera also

[@EtDiscover]

Next episode

[@dhanashreetodkar9556]

If I make this then do I will need KK flight controller to control drone?

[@mohammedasadbubere6519]

Sir please make a rc car and interface this remote contoller with it.

[@intelligentcam]

Good project 👏👏👏. Good editing

[@abhishekrai3342]

How did you solder?

[@suhas.esuhas.e8349]

Hi, sir in this drone use camera to fit this option is available

[@apoorvdeepak7333]

Kitna distance cover kr skta hai yeh drone.. Aur age range increase krna hoga to kya krna hoga. Yeh bhi batiye na..

[@ranjeetchhajer49]

Please tell me all over total budget for this project

[@zaidhussain5206]

Nice work, thank you for sharing , please keep the good work

[@EtDiscover]

Ok I’ll

[@CalvinSJ]

Can we use this reciever for brushed motor drone Please reply

[@EtDiscover]

No

[@CalvinSJ]

What changes should I make on the reciever for making brushed motor to work

[@PradeepKumarVelidi2002]

yes

[@bobbarinagaratnam6033]

Excuse me ....can you tell me which couse did you study to know about all this stuff

[@natheerkhan7955]

Thanks for your clearly explanation But I have a question. If I can use a lora module for more rang.. And what is best module that provides less time delay

[@proyectosaescala523]

Hi this is an incredible project, congratulation and thanks for sharing

[@Cyberdyne_research]

Wait… you’re offering the gerber files for free?? Bro you are my hero. I’ll donate to you In a little while. Ty so much.

[@universeofcubing3736]

Can we use a coreless motor in this

[@hmadmbarki9939]

Great i watch your videos for a long time they are wonderful , i'am ahmed one of your fans from morocco

[@EtDiscover]

Thank you so much

[@hmadmbarki9939]

@@EtDiscover you ate welcom every time

[@rachit_25]

What should i use from ur list provided in description if i want to make only 4 channel transmitter nd reciever ?

[@hamarabareilly575]

Atmega 328 p sm ke uper jo ic attach hi uska name btaiye aap

[@EtDiscover]

Ams 1117 ke bat kar rahe ho app??

[@alphayt6434]

Which programmer modules did you use please?

[@electronic7979]

Excellent

[@EtDiscover]

Thank you

[@shlokpandey2463]

Can we use it as flight control board for brushless motor drone

[@ElectroVilla]

Bahi pls ek rc sports toy car banaao plsss luv your videos

[@guptarahulsunil2149]

Can you plz provide rotary encoder switch link and which type of rotary switch we have to take plz replay Asap......,Thank you

[@quranohadees6515]

How to make circuit diagram

[@rohitgujar5072]

Sir where can we get the programming?

[@taaniyasharma3787]

Bro AAP bressles motar bna sakte ho

[@SIKHGT650]

Hey , I have already made it few days back but throttle joy stick is little tricky, did you modify it ? I have excluded spring so It can stays in same position.

[@EtDiscover]

You need to change Value of millisecond

[@parshvapatel8484]

preet charan what will I have to study to make this mu higher education

[@SIKHGT650]

@@parshvapatel8484 degree in electronics

[@princebadboy12354]

What should you do with these diy projects after making these projects can you tell me about this

[@kahosheshohe1320]

Can this work with unchangeable batteries ? Please reply

[@mrtechsavvy8835]

If I use this for making a quadocopter then I have to solder the accelerometer on the transmitter board???? Am I right ?

[@VIJAYMOGILI]

where you got that components pls give me link

[@harrishdhakshinamoorthy5383]

Google drive link is not working bro Plz help me with it 🙏

[@venkatesanjayaraman2987]

Please sir tell me where is it possible for me to dtmf and 2 mobile phones and use it as reciver and transmitter

[@akerman1345]

How much volt did you used for reciver can we use 3.7v

[@ylmazgumus2641]

Hey bro what is the menziles? This transmitter

[@quoctoan4437]

PCB on Easyda ?

[@ryanranawaka4164]

Where does The ANT wire go

[@nimeshsuriya9035]

I like to use transmitter control via Bluetooth control in mobile, what type of board can I use, please give a good suggestion.

[@kabulubotha1766]

That's cool bro;;;I'm about to know it too

[@dr.renukasingh9547]

which switch i can not hear in trans mitter

[@abhinandanmishra534]

How did u do that yo your joystick

[@mr.woldwide]

Sir me 2 remote Banana chata हू... To kya 1 transmiter se 2 receiver nhi chalege.. Na??? Code me kuch changes karna padega kya.. ❓

[@iamzairulofficial]

Awesome.ty for sharing

[@Ankitkumar-tb6vi]

Can we increase the range and the no. Of channels??

[@rahultej2248]

Your work is great!

[@thetechworldbysoumen4274]

Brother i can not understand the s1 to s7 connectors or header pin purpose. please explain this. And if i attach a coreless motor with j1 header then dose it works??

[@EtDiscover]

This receiver only for brushless motor Not coreless , This Receiver just produce sense

[@abhasharma5386]

brother your pcb pdf link is not opening please tell me another way

[@martinnovotny6737]

Hello, I like your project, but since I am a beginner, I would like to ask. I need not only to send, but also to receive battery status data from the receiver. Unfortunately, I can't adjust the program to make it work. Can you please advise?

[@rustom767]

hello, thanks for this video i made the transmitter and receiver and their is a connection between them but i have a problem no channel on the receiver is resetting to 0 for example if i connect a led to a potentiometer CH the led doesn't turn off if the potentiometer is all the way down but i can increase the brightness of the led when i move the potentiometer up even servos don't move or the motor on esc ,i can control the throttle but not turn it completely off. the same happen with switches can't turn of a led but can increase brightness of led when turned on. please if you have any idea tell me thanks in advanced :)

[@artem_kyselov]

You are the best! Yhfnk you a lot!!!!

[@EtDiscover]

Thank you

[@techpinak]

Can i program microcontroller ic using arduino

[@EtDiscover]

You can

[@RameshKumar-rj1xl]

Nice video 😎 bro

[@EtDiscover]

Thank you

[@aaryanpatil9213]

I want to make one but I am making PCB at home and when I create schematic ,and tries to convert in PCB it says incomplete nets. Please help.

[@banglacreative2396]

please make a drone with this

[@yashwantkumar3233]

Exactly, please make a drone with Arduino flight control and this transmitter and receiver

[@whitedevil-io2cr]

Can i connect brushed motor to this

[@gersonmoura6634]

Hi, how did you modify the joystick potentiometers? Thank you!

[@viplavtripathi2461]

can lora be used for transmission

[@ayushjaiswal5324]

can we camera in it

[@nicktube8637]

Is this transmitter compatible with Whoop Lite F3 Mini brushed flight controller

[@shamimahmed-ux4jy]

Can we program ic with arduino uno ic socket by change this ic plzz tell

[@akerman1345]

Hlo i cant order pcb using jlc pcb because i am from india

[@ShaktiSwarup-np8lz]

Sir, what is the range of trancmiter and riciver

[@tawandamunyanyi2810]

this is good work. can you kindly share your schematic diagrams sir. and if possible your code fro this demostration . the link in the description is broken i guess. thank you

[@knowledgegyaan4778]

Sir your google drive link is not working please provide me a correct link i am also making a drone so i need this Tx and Rx

[@damo690]

Hi. I wonder can you help me. I have a parrot skycontroller for my drone. It is a wifi controller. The function for up down has stopped working. Controller connects to the drone and all other functions work. I can only assume the control chip in the joystick is gone bad. Where might I find a new chip to replace this? Parrot are of no help to me on this.

[@anirudhkundu597]

can this be made with STM 32? STM 32 has better ADC resolution

[@SumitSharma-do8ye]

How many metre done by without antena module

[@electroindia1008]

What are the 2 pin male header on the receiver for?

[@nohedsheikh3764]

how to program IC without ur that programming device

[@EtDiscover]

You can using Arduino uno nano as you want

[@pandrocutz9691]

@@EtDiscover how

[@ExtcWorld]

Sir i am havin a rc brushed motor mini quadcopter and i lost the tx, the drone is build with stm32f031k4 chip with xn297l radio chip, so i want to control that drone with ur diy tx, is it possible?

[@vkrishankumar3380]

Can I use atmega8A

[@kartikbhargavapsd]

Can I use it for flying drone . ??

[@prakash580]

Sir , circuit diagram link not opening,give me circuit diagram plz

[@anirbanchatterjee835]

please describe about the "rotary encoder"(sw1) in your ckt. where you have placed the potentiometer....can you give a link for the potentiometer?

[@raosonline9970]

can it be use in drone motor

[@rcplanelover1643]

Bro can I use atmega8 ic

[@stefanb.933]

Hello. what is the encoder on the board used for? . can you order a stepper motor?

[@onikislam6693]

Where can i buy it? Can i get from International shop

[@utkarshshukla231]

Can we connect a FPV camera with it ?

[@dharmdevsinhrjadav1290]

How to make ppm or sbus reciever

[@EtDiscover]

Coming soon, next video

[@dharmdevsinhrjadav1290]

Thanks for replying 😀

[@sunilrhce15]

Which application for maping

[@SumitSharma-do8ye]

How many metre it can recieve and transmit data

[@shreyasahu5906]

how many motor we can control with it?

[@sunitasharma8938]

I have only Arduino uno board can I directly connect it with transmitter for uploading the code . If yes then how?

[@Yves_Spencer]

can i use arduino nano instead?

[@tanushmaurya3388]

Can u make a racing drone using this transmitter and receiver

[@afranioafranio2]

Excellent work!!!

[@TechInventorAman]

from where do i buy that type of joystick

[@rc3d490]

AliExpress

[@TechInventorAman]

@@rc3d490 aliexpress has the joysticks which have center as the 0 position which does not provide the full range of throttle . so that is the one i am asking for

[@EtDiscover]

Amazon the purchase link is in the description box

[@abhishekmeena4634]

Cant you provide any circuit diagram for transmitter and receiver??

[@gunildrokhoirom4013]

From were we should order all this things

[@vijayalakshmi-vb8fk]

sir can the transmitter connect to any receiver