Ethanol Recovery: 2L RotoVap from Best Value Vacs

[@atowler09]

Wow....All I can say. You have opened my eyes up to a new world. I've been simple minded for way to long by staying with flower only. This plant has brought a quality of life to me that I was sure I would never see. I am so thankful for cannibis. Thank you seriously. I am in mode one as of now. Collocation of data and know how, and I'm on my way to extracting. GREAT vids.

[@fregrowli]

Flower is too OG for me =P

[@Rauchgestein]

I swear, your voice sounds like Archer. Could listen to your videos forever.

[@shawn80j]

Excited too see your short path video. Subscribed!

[@MoreTubContentOnMyChannel]

Awesome! Extracting in the Springs.

[@MoreTubContentOnMyChannel]

So many garbage videos, this is clean.

[@jessicasessions1814]

Damn stranger! Great to hear ya, waiting on them garden vids, super long time sub.... but no pressure😆

[@davidcombs5468]

Very , very INTERSTING looking forward to the next step

[@fregrowli]

Meeeee too! :)

[@SurprizedDaily]

me 3....great stuff fregrowli

[@ronwitek4539]

I've done countless testing on hydrocarbon extractions and the ppms left over are not in a range to fail testing these tests were done with oil made for a toddler with severe siezures point is when you use hydrocarbons they don't get trapped like ethanol because the boiling point is so low :) happy extracting

[@noncents2664]

Great information! really looking forward to video #3! Have plans for that?

[@kevinkuhle3257]

That's what I'm waiting for.....

[@hoffmans.choice]

Thanks for the knowledge. Cheers from the Mitt!

[@aaronhuynh2160]

Thank you for the great educational video. Will there be a 3rd video soon in this extract series?

[@darknezzgrowz3366]

Nice brother! Would be nice to bump heads I'm self taught and would be nice to understand the tech your one of the few that seems willing to teach 👊✊👍

[@dhuff9844]

Thx bro!!

[@joemascarello4244]

I just purchased same set up. Burnt my first batch. Water too hot. Then I watched your video and no problems. I cannot find the next step video you talk about. Please let me know where to find. Thank you Joe Nyc

[@drphil4209]

Aaawe yeah, thanks for sharing 💨💨

[@nicojordan3542]

Please make a short path tutorial much like this.

[@okccitizen4400]

I agree with this comment please. Subbed liked.

[@dexterzoldyck334]

After it comes out the oven is it safe to fill cartridges are does it need to be heated or anything or cut

[@alexstaehlin236]

Great videos! Any chance BVV will be sending you a diamond miner for you to demo for us? There's no explanation from them or anywhere on how those function, while others have said they prefer mason jars instead. Thanks!

[@fregrowli]

Alex Staehlin I was hoping/thought they would, but I do not have one yet.

[@getupgonow3231]

How soon will you do a video on fractional distillation or is it possible with this equipment. Again well done!

[@clueless4185]

So when will the next in the series be uploaded?

[@user-io7zb5eq4x]

Very nice brotha

[@H4rdstyl30wns]

Very interesting. What happens when the vacuum is too strong?

[@StreetbikeVinny]

Part 3!!!!!

[@thegoldenchild4657]

Apparently he gave up

[@shawn80j]

Any chance you could make a more in depth video on the water aspirator ? Where it hooks up to the rotary evaporator? What the two lines coming from it do. One pushes water the other is a return? How does it pull a vacuum if both lines are hook up to the coil. Do u have to pull a vacuum than put it on the coil. Does the rotary evaporator hold the vacuum once u draw one or do u have to constantly pull a vacuum or add vacuum now and than?

[@shawn80j]

Got mine today. Two ports on the front are both vacuum ports. Theres two ports on the back. One delivers water the other receives water back to the res. You do have to keep running it the whole time your distilling. Only to keep your coil chilled. I feel like its expensive for what it is. About 550 shipped to your door. But it is better quality than i expected and works better than i thought it would.

[@Fulken16]

Hi everyone, alternative medicine researcher here . I am putting pristine extract and when I’m distilling my product darkens a lot, I was doing 30C. I am working on some medicine research and was wondering if the RPMs on rotovap affect quality I’m using a 1402 Welch.

[@Billy011]

I think you need to be colder temps during extraction or to winterize after extracting. Maybe try dry ice.

[@getupgonow3231]

Thank you so much for sharing your knowledge! I hope to be able to fulfill my goals and will support your endeavor as much as possible! Well done young man! Nicely done ! What is the best way to contact you?

[@aljoejoe1]

Is that recircualting vacuum pump strong enough to run In a short path distillation kit?

[@fregrowli]

No

[@aljoejoe1]

@@fregrowli thank you, saved me alot of time. I really appreciate all your videos cant say anything has helped more.

[@reelthing4u]

cheers bud

[@fregrowli]

cheers!

[@mktrooper700]

Bro.... where is your labcoat?

[@cyberhog8546]

sick

[@okccitizen4400]

Liked and subbed bravo!

[@darbals9063]

What is the "PPM"?

[@fregrowli]

Parts Per Million

[@aljoejoe1]

Im curious as to why he would decarboxylate it again, was it not decarbed before extracting?

[@fregrowli]

I have never decarbbed before I extract. Ever.

[@aljoejoe1]

@@fregrowli thank you for the quick reply, I love all your videos. Is there a reason why outside of quicker thermal decomposition?

[@fregrowli]

@@aljoejoe1 decarboxylation kills all of the terpenes. Not a problem of you are going just for distillate, but I basically never do at this point.

[@aljoejoe1]

@@fregrowli okay thank you for the insight I really appreciate it, and keep up the amazing content!

[@gatorcookie738]

Can you recover the terpenes if you destillate the carbs with good old fashion distinctions process, with the copper wire , kindof like the moonshiners did it?

[@vitalechristopher4792]

You inspired me more videos please

[@livinglife8953]

can this setup be used to make distillate ?

[@fregrowli]

It's part of it. While there areultiple options, the steps after this may include a short path distillation package.

[@johnnyxxxxxx6506]

Can you do this with winterize rosin? Will my rosin oil remain liquid after the rotoray evaporator extract the ethanol, so I can still vape it? Or will it dry up back into rosin/shatter?

[@fregrowli]

I suppose you could. It only stays as liquid as as much a) solvent is in it, and b) terpenes are in it. Those are the two viscous portions. If you rotovap (or purge) the ethanol off, it will become less viscous, but you don't really want to be vaping ethanol.

[@johnnyxxxxxx6506]

I am thinking about getting the same one you have from best value vacs. If I was to rotovap all the alcohol out. Do you think it would be viscous enough to vape or would I need to add terpenes? Thank you for your time and making this video. I found it every helpful.

[@generalstuffreligion2ndcha453]

what if i decarb before winterize. may it save the terps?

[@rvgold8301]

No... when you decarb you loose terps no matter if is before and is better after, to remove all the ethanol.

[@greenskeletons1896]

✌👍✌👍🔥🌳🌳🌳sweet video!!!200 proof for life

[@theophrastus9029]

They did warn us that smoking grass would lead to hard drugs

[@thegoldenchild4657]

What ever happened to "part 3". What a let down😢

[@BTobias84]

How bout a sauce how to?Can’t find your goodies since miracle medicine left us. 😪

[@sheepdawwg]

hello friend i have some questions do you have a email i can message you at