etrailer | Westin Oval Tube Steps Replacement Step Pad Review

Click for more info and reviews of this Westin Nerf Bars - Running Boards:
www.etrailer.c...
Check out some similar Nerf Bars - Running Boards options:
www.etrailer.c...
Click for more info and reviews of this Westin Nerf Bars - Running Boards:
www.etrailer.c...
Check out some similar Nerf Bars - Running Boards options:
www.etrailer.c...
Click for more info and reviews of this Westin Nerf Bars - Running Boards:
www.etrailer.c...
Check out some similar Nerf Bars - Running Boards options:
www.etrailer.c...
Click for more info and reviews of this Westin Nerf Bars - Running Boards:
www.etrailer.c...
Check out some similar Nerf Bars - Running Boards options:
www.etrailer.c...
Click for more info and reviews of this Westin Nerf Bars - Running Boards:
www.etrailer.c...
Check out some similar Nerf Bars - Running Boards options:
www.etrailer.c...
www.etrailer.com
Don’t forget to subscribe!
/ etrailertv
Full transcript: www.etrailer.c...
Today we're going to be taking a look at Westin's Replacement Step Pads. These are going to be a direct replacement for your old worn out pads on your Westin tube steps. The pads come in varying shapes and sizes, so you'll want to use our website to determine the appropriate pad for your step. The pads are sold individually so you can replace just one, whichever is broken, or go ahead and replace all of them on your tube step. They're made of the same durable UV-resistant polymer plastic as your originals were. And while our old ones crunched and cracked below our feet, our new ones work great.This vehicle here is nine years old, so the tube steps on it are likely eight years and 11 months old.
But, as you can see, there's really nothing wrong with our tube step. Just with the pad that's on top of it here. It's all cracked and coming apart. You can just kind of flake it off like that. Well, with an easy, quick pushpin replacement, we could have brand new looking tube steps making our '09 looks like a '19.To remove your old step head, you're going to need a few things.
You're going to need a prying tool. We're going to be using a flat bladed screwdriver, a rubber mallet or soft face mallet, and having a pair of needle nose pliers can come in handy for a few tricky spots.So we'll start by prying or old step off, which if yours is anything like ours, it comes off pretty easy. But there are still barrel clips inside of our tube step that we need to remove. There's a couple of ways to remove the barrel clips. It's going to depend on your particular tube steps.
Ours here do not go all the way around, being completely enclosed. There's an opening at the bottom so we can just knock ours straight down and they'll fall out to the ground. If yours is completely enclosed, you want to have these needle nose here to pull them out.Before we can replace these, we'll need to crush them so we can get them out. And we'll just continue that all the way down the rest of them. Now, if yours was completely enclosed where you can't just drive them out like we did, you can pull them out the top.
You are still going to need your screwdriver and mallet to crush them, pushing in all the pins inward by crushing it, and then pull it out with your needle nose pliers.We've gone ahead and finished removing this pad, and our back pad also needed to be replaced. We removed it as well. Before we install our new pads, it's a good idea to get all the dirt and debris cleaned off of your step there. We've got some Speed Shine from Griot's here. We're going to just clean it all up till it looks new again. Glass cleaner will work fine for chrome steps like this, but you can pick up some Speed Shine here, which is great for all surfaces, including your vehicle, right here at etrailer.com.Now we're all clean. We're ready to install our new pad. We'll start by placing the new barrel nuts that come in your kit down in the holes. So you just want to get that started and use your rubber mallet to just tap it in place. We'll repeat that for all the remaining holes. And a little tip, if you have them offset like when you here, the ones that are closer to the door can be easier to install if you actually open that door there, giving you a little more room to get your swing straight down on

[@scott2228]

Thanks for the vid. Time to get started.

[@etrailer]

We are happy to help! Check out the following link for more information on this replacement step pad. www.etrailer.com/Accessories-and-Parts/Westin/21-0001.html

[@tony2tiger1]

Yes, helpful video. But aren't the old barrel nuts rattling around inside the tube while you're driving?? I noticed you knocked them into tube.

[@etrailer]

The bottom of these tube steps are open so the barrel nuts will fall to the ground. If your tube steps are enclosed, you can take one of the end caps off a blow out the barrel nuts. www.etrailer.com/Accessories-and-Parts/Westin/21-0001.html

[@ShiftyOutdoorsUtah]

Very helpful. Thanks.

[@etrailer]

We are happy to help! Check out the following link for more information on this set of tube steps. www.etrailer.com/Accessories-and-Parts/Westin/22-5001.html