How to use INPA to FIX your BMW - Walkthrough of INPA

In this video I go over a walkthrough of INPA which is a powerful tool for diagnosing issues that are wrong with your BMW. This applications lets you read/clear errors, activate jobs and features. If you do not have INPA/ NCS-expert installed, please check out the link below.
Link to buy K+DCAN CABLE (used for coding): amzn.to/3qNOLew
WATCH THIS to setup INPA/ NCS-expert: • The EASIEST Setup Guid...
SMASH that LIKE button and subscribe!
CHECK MY AMAZON STORE OUT: www.amazon.com/shop/evangoyuk
Check out ECS Tuning for all your Euro part needs. Use my affiliate to help the channel: bit.ly/2JqszXb
YT INSTAGRAM: / evangoyuk
***Using the links below will help out the channel ***
Link to buy BMW Sweatshirt: amzn.to/2yzdRsq
CARLY for Coding and Diagnostics: bit.ly/3c9uMiV
Use my link for VRSPEED: www.vr-speed.com/ref/53/
Link to 3in1 Shine Armor quick coat: LINK TO BUY SHINE ARMOR: shinearmor3062.grsm.io/evango...
Link to Thermostat: amzn.to/2wkMDof
Link to Expansion Tank: amzn.to/2XftE9O
Link to Fuel Pump: amzn.to/2Xha9xB
Link to Maf Sensor: amzn.to/2yJ4d6n
Link to CCV kit: amzn.to/3e0gsLP
Link to buy K+DCAN CABLE (used for coding): amzn.to/2WkPo1O
eManual Link: shrsl.com/1cw3h-11y0-aya4
Check out ECS Tuning for all your Euro part needs. Use my affiliate to help the channel: bit.ly/2JqszXb
HELP SUPPORT THE CHANNEL: www.paypal.me/evangoyuk
#BMW #E46 #Diagnostics This description contains affiliate links. If you buy a product through my custom link, I will earn a small commission at no extra cost to you. This video is for entertainment purposes only. Evan Goyuk assumes no liability for any repairs or modifications performed by the viewer as a result of the information contained in this video.

[@denzelw9664]

Kudos to you again Evan keep doing what you do, blessings to you and your family.

[@EvanGoyuk]

Thank you man!

[@patrickjones1061]

I have had the Inpa software and cable for a few years, I have never took the time to install it. You made it so easy thank you. 👍😉

[@richardabner9420]

Hi Evan, another great video you have dropped on us. I’ll have to check this out in my vehicle.

[@criticalfocus424]

Great videos - very helpful. If you have an error code, how do you identify which module it comes from? I have an emission air pump error so I know it's in the engine listing.

[@stephenpato5524]

Thanks for this! I recently purchased the INPA installation CD + cable, have yet to install though. I see there's a readout for oil temp, if only there was a way to code that into a permanent dash reading or at least see it in the hidden menu!

[@ConcreteJungle7]

Great tutorial Evan Goyuk thanks for the video. 👍

[@EvanGoyuk]

Thank you!

[@adareone]

Thanks for the information, I have the software installed but the batter button is off as well as the ingintion is showing as off--HELP

[@IgorKolupaev]

Great video, thanks Evan. 2 questions here. Is there way to translate certain sections from German. And another one: can you suggest where/if I can activate radiator fan for diagnostic proposes for E60 M5. Tnx.

[@halukpekpolat696]

Great tutorial! Thanks.

[@yasinavci9051]

Hi Evan Goyuk, nice and clear tutorial!! 👍 I wanted to reset the adaptions but its does nothing when i press any adaptiob to clear... perhabs you know whats going on? Reading errors and clearing is working properly, its only the adaptions. I own a N42B20 Thanks !

[@FlySindbad]

Hi, Nice video, I have a question, Why when you selected F2 for E46 ... No Function Jobs Is showing? how can I read all modules list in the E46 ??

[@tauseef7061]

Hi, i have ordered one for my car (e91 2009 LCI 318i). Would i be able to disable the auto start/stop feature?

[@szabolcscodra3002]

Hi. Thank you for the easy installing. I have an e83 lci (2007, m47), the program (inpa and ncs) not communicate with the engine, with the rest of others yes, i can read the codes in inpa, but dosent work to read the vin, or to code anithing in ncs.... Have u any idea? I have the same cable, with the switch, i tried all the positions for the switch. Thank you, Szabi:)

[@BimmerDope]

hi Evan do you know where in inpa to look for oil level sensor. i have no dash light but pa soft says sensor fault.want to check with inpa. thank you

[@danielrankin7766]

Thank you, Very Useful Video :)

[@richardabner9420]

Evan, re: the K+DCAN Cable with the switch. I purchased the cable from Amazon following your link to your recommended cable.Thanks. Mine has a push button switch rather than a slide switch. It clicks when you push it and clicks if you push it again.How do I tell when it is connecting pins 7+8

[@Handguardsandhandlebars]

Hello, did you ever make a video on the Tpms delete. I'd be very interested in it. Thanks for the video.

[@dinhvanpham8102]

Hi, thank you for a great video. Which version of Inpa support BMW F11 525D xdrive 2012?

[@JUNGHO15]

HI, Evan, I followed up your instruction to install it, why the NCS-EXPERT open it, after F1+F3 , do not indicate FG and FA NBR , that is only Chassis E70 come out. I check software, do not find the SP-DATEN. Whether or not some where miss the software or others. thank you so much

[@chrysa757]

Ok great. Thank you Evan !

[@jurisdort4498]

Hello! I can't read the information from the old engine control block, so I can install the information on the new block. question? will this program help me?

[@ecmod8075]

Thanks for the video. Can you say, how you fixed 5DF5 problem? Thank you for your answer.

[@TrickMasterPC]

How can I set the I/M status to completed for the secondary air system monitor?

[@kawasaki5006]

Hey man, u know why i cant read body or chassis codes? it says error: ifh-009 no response from control unit. Engine codes work fine and clearing etc. Car is e46 320d 2003, tried with pins 7-8 bridged and without too.

[@sssds8573]

Thank you matey absolutely top dude managed to install it thanks

[@robertgreco2433]

How do I register a battery in a 2013 X1 with INPA? I believe it's an E84. Same AH and AGM as the original battery, but not a OEM battery. Thanks!

[@Tatonka88]

I don’t get the battery or ignition on for my e46 through the obd2 under the steering column. My inpa software and cable work on my e38 with the 20 pin adapter thou. What is this about bridging pins? Should I do that or should I have the battery and ignition on before I mess with other stuff?

[@teamskattefritt7672]

Hello, is it possible to lower a BMW e61 with the cable you linked?

[@dafinsfan1]

Great video, thank you. I need to program the LCM on a 2004 E53, with the VIN, etc. What's the best way that you'd recommend?

[@EvanGoyuk]

You need bmw scanner and inpa. I have a video on this when I retrofit my led tail lights it’s part 2

[@docfeelgood111]

I had bought BMW DIS V44 V57 SSS V63 & TIS V8 INPA EDIABAS DIAGNOSTIC SOFTWARE USB 20-16 PIN. I noticed your version has a lot more English than the version I got off ebay. Is there a setting to change it to English on the program or is it just a difference our softwares? Your version looks a lot easier to use for someone that speaks English where my version is a lot more German.

[@lukewalker6961]

do you know what to do about error #95? i think im missing the right .prg file for my EDIABAS folder

[@mdiloutube]

Evan, Thank you for these great videos.... super helpful!

[@Abszurdista-fatalista]

Hi, thanks for sharing. I didn't find the function for learning the valvetronic positions. Can you tell me what I need to select in INPA? It just boggles my mind. Or is it not possible at all using INPA?

[@TheLongrange9]

Excellent video! Been working with INPA for the past couple of months and I'm learning. Can you tell me how to read the low fuel pressure sensor readings and the high pressure sensor readings on a BMW e90? Thanks.

[@eaglerider94]

Hi, just installed INPA but need to use if on my E34 and E30 but don't see any F functions for those models. I've been told I can use this for them. Any truth to that?

[@gogglebro9421]

What software is used to change the programming in the DME?

[@deseancarter9643]

Great channel. You’ve helped me out more than once with these. Keep up the great work man

[@EvanGoyuk]

Thank you

[@omarpellot2065]

Hi Evan, I need support w INPA set up for E36 Transmission module.

[@BugmanVlogs]

Does INPA have the ability to change the engine idle rpms. I have the 3-2-1 bump and its a rebuilt transmission so before buying another valvebody as it could be the low pressure valve, I wanted to try the raising of idle rpm values that is another trick to fix this. Yes I have reset transmission adaptation values with no change.

[@LockMonster]

Hi. I fitted a new idrive button, guess they are programme to the 2009 535d E60? how do i make it work?

[@scooter1391]

would this work with 2010 mini cooper r56 to synchronize the ews

[@TheBlackfalcon5283]

Hi, i have the cable connected with pin 7 and 8 bridged, impa reads the code for the engine and the values of it but don't read the rest of the chassis/bodies etc Also if i use ncs expert it doesn't work. I have a 323Ci. When i open impa even if the cable isn't connected to the car tells me ignition on and cable connected.

[@edwardcanty7259]

I was checking out my steering wheel angle sensor data in INPA and accidently hit "delete protocol". Do you think I just screw up my car?

[@tznutz4824]

Where can I find your version of INPA at? My version doesn’t have a coding feature like yours do let alone half is english and other is german.

[@dennisrobinson8008]

Can you test your cooling system fan speeds with INPA?

[@sharjeelasghar7625]

Question, so I can just download this onto my MacBook and then plug in ob2 to usb?

[@johannnolan7274]

Hi, Thanks for these videos, it makes alot of scense now. I would like to know, I replaced my ABS controller unit and pump, how do I code the new one onto the ECU, as I keep getting a VIN mismatch error, and also the ABS light is on, on the dash and is yellow, I was told to recode the ABS Vin.

[@EvanGoyuk]

I can help. Message me on instagram @evangoyuk

[@chrysa757]

Hello thank you for making this great and helpful videos!👍 - I have a 2008 BMW e90 and I need to reset the adaptations after a transmission service. Will this software be able to do it and what is the correct type cable? Thank you!

[@EvanGoyuk]

Yes

[@EvanGoyuk]

Kdcan cable

[@sajadkhan-hk2zm]

Hi great video. Can you reset vanos solenoid adaptation with inpa

[@GymMotivation2]

1--Can the ps of the car with this cable K-dcan. 2-- Can the map version be updated by this cable

[@Lavernator]

I have no system diagnose option in my INPA menu after following your install video, I can get in to read engine status but cant get in to code injectors

[@adamshebib8319]

Yes Thanks very much Evan. K+DCAN Cable you linked is not available is there another you would recommend?

[@EvanGoyuk]

Link has been updated: amzn.to/3qNOLew

[@jeremyhetrick]

Hello Evan! So I installed the software and I have a cable, hooked up to my 2007 E83 with the N52 engine, and all was well until I started deeper into the menus - they were in German. Is there a fix for that, besides translating?

[@Stian2001]

Quick fix is to take phone and picture translate it:)

[@Cakewithaj]

Can you code out the alarm system on e46 using inpa?

[@juancarrion834]

Hey is the car running while you’re using INPA? Or just accessory mode? I noticed the engine rpm speed and intake temperature were moving with the analog values. Is it safe to code the car with the engine on? I’m afraid of draining the battery if the engine is off

[@EvanGoyuk]

I code in accessory mode and run tests with engine on!

[@soheshpatel3502]

How do you change the INPA setting to show the information in English? I downloaded the easy install, but once you load INPA its all in German.

[@wdwillson]

How would you code a new/used Abs/DSC module an E46 convert? Also do you have a direction for ISTA?

[@EvanGoyuk]

I will be making a video on coding a new DSC module I need to replace mine. Email or message me on IG for help with ista

[@durvalbbk6786]

Hello! how can i scan the f56?

[@gman103]

I'm curious to know how you got all of your other menu's to stay in English... my main page is English and all the others are in German

[@broderickmaxwell9501]

Eric do you have any information on how to code a 2011 f10? If so could you share it? Thank you.

[@EvanGoyuk]

Yes video to comes using esys! I do have a video using bimmercode!

[@Latecomersband]

Im glad i found this on how to use inpa in simple terms. I have a question, my inpa only works with the engine codes but not on the other functions like its body controls, transmission, etc. It says “No response from control unit. Program will be stopped”.

[@Latecomersband]

INPA error IFH-0009

[@carlwood5501]

Same here

[@darsana.p2456]

Hi sir can I fix vp44 opel Astra 1999 pump to bmw e46 318d 2001

[@gwad_cranzybylmnprod3513]

hello can i have the inpa software download link for windows 7 How much does it cost

[@christopherlaskoski189]

Great videos man. This is the second of your videos that I have watched - specifically trying to learn quickly how to use this software (already downloaded and the profiles copied in) and how to FIX both of my e39 540iT. I have a 2001 (Gandalf The Grey) and a 2003 (Gandalf The White). The Grey is actually stranded somewhere not at home after suddenly misfiring all over the place..... right after I cleaned the combustion chambers out and it drove extremely well for about 90 minutes. Then I parked it for about 5 hours while at work and then I tried to go get lunch and it was not even the same car I drove that very morning. I replaced all four O2 sensors, but the car now refuses to start and run - I'm thinking codes need to be cleared - but I'd really like to hear from you or someone about this. I've never done this kind of work before and it frightens me to think that I will start screwing my cars up by not having a clue. The White, sitting now for two years in silence, has had a TRANSMISSION FAIL SAFE MODE problem for about three years now - it's been driven very little and is in fantastic shape overall. Do you think I can correct this fail safe problem using the cable and software? Does anyone know anything about this? I likely will have to join and hit up a real forum. But any help is greatly appreciated for sure. I've done a pretty damn good job at working and repairing my 5 vehicles since I started in 2014 - but I'm coming up against another steep learning curve and I feel lost. Thank you.

[@b.piechos5099]

How did you get E39 profiles?

[@jonny2legs77]

Fingers crossed now I’ve watched this al use it on my mini

[@Chaz2k]

Hi the link for the K+DCAN CABLE doesn't say it supports E46. Will it work for my 00 323ci?

[@EvanGoyuk]

Yes it will, you may need an adapter to use the 20 pin under the hood

[@fernandohood5542]

I want to use this on the e39 520i but the menu does not have it listed.

[@JOHOR_BossM]

Is inpa free download or need to buy ?

[@richardabner9420]

(cont) How can I tell which click is connecting pins 7 + 8, and which click is disconnecting pins 7+8, there're is no indicator? I guess when unplugged I could use an ohm meter. TIA

[@EvanGoyuk]

Yes a meter

[@rickcampodonico]

Does he reply? What is the cable required to connect to a laptop (I assume this is Windows)

[@tempest411]

I've had a laptop loaded with INPA, NCS Expert, and a few others for the past five years...I'm afraid to let it get closer than 20' of my E53 for fear that I'll brick it. I know if I screw up there isn't shop in the land that will want anything to do with fixing my mistake.

[@lyndonp6296]

Will this work with BMW Mini ?

[@andrebr0212]

Hi guys. I get "Requestted control unit: 'PDC_87 ' not found. control unit found: 'PDC_65_2'. Program will be stopped!" How can i solve this?

[@bobafittness1346]

I love your videos. Can you check oil pressure using INPA?

[@EvanGoyuk]

Yes but I think it depends on the car

[@Dj_Ashy.D]

Hi Evan, Ash here. Wonder if you could advise me on something. I've been struggling to start my friends e46. Problem seems to be the anti tamper protection. I recently watched one of your videos on inpa and downloaded mikes bmw tools from the link you provided. I had a cable that i purchased from a shop here in SA, I think its a rip off as it doesn't have the switch from kline to dcan. When I connect to the car, the battery and ignition light stays on, on the inpa program. Even if i bridge the 7 and 8 pins on the cable. I somehow managed to read the error codes and it says 144 manipulationsschutz ews which is the anti tamper protection. I tried to sync the ews and dme, get a few messages in German that basically say start value already set. Do you maybe think that i should buy a proper cable? Its an e46 318i 2000 preface lift, with the 20 pin round connector not obd. This car was bought from someone, i think they tampered with the car before as well, so I maybe want to try and recode all settings back to factory as well, however for now I'd like to get the car started. Any advice would be appreciated

[@EvanGoyuk]

Hello, What year is this car?

[@Dj_Ashy.D]

@@EvanGoyuk its a 2000 model

[@EvanGoyuk]

You need to use the 20 pin under the hood

[@rafalwaszkowiak6165]

Hi i have bmw 330i e92 and can not connect dont see my car n53 in inpa :/

[@johncollier9901]

bought the cable and software and installed on laptop, I cant seem to find out how to fix my car with it though, 2A99 and 2F4A codes, car is a 2007 x3, just turns over and over and wont start

[@bobwright6588]

John Collier This is interesting. 07 x3. 2A99 and 2F4A. I'll look um up.

[@sanjeewaperera6950]

Thanks for the useful video, can I use your google drive software in Australia? can you update a new link in Amazon/ebay ( cable not available in ), I prefer Australia ebay link so i can get it faster

[@habibithingzz367]

Anyone could help me please some pages are English and some are in complete German how do I get it to all englishb

[@aussieknowhow]

Thanks for explaining all that, very helpful. Is it possible for INPA to tell you what modules your car has or is it a matter of clicking on them and if you have it it will work?

[@EvanGoyuk]

It can tell you under functional jobs

[@aussieknowhow]

@@EvanGoyuk Thanks for the reply. Sorry I don't know what you mean by 'functional jobs' in the context of INPA?

[@EvanGoyuk]

Once you click on the car in the top left of the window that pops up

[@johnm-vo9cm]

Hi it is save to work on a bmw e60 2008 with this cable?

[@EvanGoyuk]

Yes this cable with work that is linked in my description

[@andykgoods]

Can you tell me what to use on an E84 BMW X1 to read faults I have inpa but can't get it to work

[@EvanGoyuk]

Inpa or ista will work

[@Skoobie-zx1000]

Thank u

[@josharagon79]

The cable will work for all BMW, specifically E39??

[@EvanGoyuk]

Yes

[@paulloper8333]

What's up Evan, first thank you for all your videos. However, I have a small inconvenience. I can read my ecu without any problems, but when I want access to another module I get the ihf-0009 error code. Any idea what it could be?

[@EvanGoyuk]

Thank you for watching! Ah yes this sounds like pins 7 and 8 are not bridged? Does your cable have a switch on it? If not I suggest buying the cable linked in my description it’s the exact cable I use.

[@paulloper8333]

@@EvanGoyuk Do I have to switch it if I want to read the other modules? I have that exact cable

[@EvanGoyuk]

What car are you trying to read?

[@paulloper8333]

@@EvanGoyuk 325i from 2005, e46 m54

[@EvanGoyuk]

Yes you need the switch set to all the way to the left

[@playa4lifesd619]

Oh man! I really need help here 🙏 I have a 2006 BMW 330i and I ran the process and worked the first time. I topped it off, turned on the car and it overheated. I tried to run the process again and I couldn't get it to bleed anymore. I checked all fuses under the hood as well and all are good. I can't figure out why it won't run anymore. I'm stumped 🤔 Can I activate the pump with this software?

[@EvanGoyuk]

Yes

[@playa4lifesd619]

@@EvanGoyuk I just used it to activate the pump and I got error 2E84 - Pump missing lol. It's still there 😂

[@millyhacham3342]

for bmw z3 1998 1.9 i need 2 cables?

[@pdl7083]

I do not see E39 in the list. Will it work with 2001 E39 ? Thank you.

[@EvanGoyuk]

Yes you have to go under older models

[@pdl7083]

@@EvanGoyuk Nice. Thank you.

[@skazariants]

Which pins are needed to be bridged to connect to E39 using INPA. There is no pin count in the K+Dcan cable. Does anyone has a picture of bridged pins?

[@EvanGoyuk]

Just buy the cable In my description and you won’t have to mess with anything

[@sickyrides]

@@EvanGoyuk I have the cable, how do i know which switch position is bridged

[@hergihergi8673]

What can i use for windows 11 ?

[@mannabatth4092]

If u know how to read fuel trims in inpa please make video

[@EvanGoyuk]

Sure! I make we used this to help diagnose Matts BMW e46

[@daveknight8807]

I need some help Coding! I have 2015 BMW X5 35D and I have loaded all the programs onto my laptop Windows 7 (INPA / NCS Expert & Dummie / BMW coding tool etc.) I have ordered two ODBII connector's now since I thought there may be a problem with the 1st one. One is USB one is RJ45 -Ethernet type. Neither seem to connect to the software. Basically neither INPA or NCS Expert can read my VIN or open any info on my vehicle. I have reconfigured the ports for the USB cable to COM 1 and the RJ45 I cant seem to read or get a connection with that cable. No audible beep when I connecting it like I get with the USB cable, nor any connection visible under System tool/devices. Both Cables show a power light when plugged into the OBD port. I did load some software from a disc that came with the USB cable. Anyone have any suggestions? Thanks.

[@EvanGoyuk]

You do not use ncs expert to code f series. I have a video on the basic using bimmercode

[@shayanmerrikh9254]

which one is the link for INPA

[@patrickmcghee.]

How do i check out abs?

[@delirinils1015]

Why does it not show models in my impa? I have Version 5.

[@glenglene8473]

after i selected the engine, it gives me an error message saying "data transmission to interface disturbed. Did I miss a step or something?

[@EvanGoyuk]

Drivers installed correctly?

[@somerandomname666]

how do i download the program onto my computer? My computer says virus detected or application not available.

[@EvanGoyuk]

It’s not a virus I promise

[@kayra4840]

how to find EML fault problem with inpa?

[@Defiler151]

Can't get a response from a single module in the body category, do I havet the wrong cable?

[@Defiler151]

EDIT: Yes it was the wrong cable, got a new one and everything worked like a charm

[@w4ryd]

Hi will this work with E63 (2005 6series)

[@EvanGoyuk]

Yes

[@hanisaid1820]

pleas help me about my abs i want coding