Even long-time carpenters have learned this from me! Just a little lather will fix everything

Рет қаралды 1,542,463

2 ай бұрын

Hello everyone! You are watching video " Even long-time carpenters have learned this from me! Just a little lather will fix everything "
I hope you enjoy watching my video!
► Subscribe me !!!
On Inventor K channel, you can learn various inventions, science projects, crafts and DIYs teaching how to reuse or recycle.
© Copyright by Inventor K ☞ Do not Reup

Пікірлер: 872

@mrmog3833 Ай бұрын

The tools used for fixing it do costs more than buying another new hammer..

@ernestocritzmann8927 Ай бұрын

Lousy fix! Get a new handle and do not waste time!

@frankbusch4747 Ай бұрын

agree!

@otmarraus8060 Ай бұрын

It depends on the point of view

@davidreynolds309 Ай бұрын

$8.49 ball peen hammer at Harbor Freight

@ernestocritzmann8927 Ай бұрын

@@davidreynolds309 That means about $3 ± 1$ for simple handle.

@guztavomartinez1776 Ай бұрын

It’s the challenge!

@daveworthing Ай бұрын

No one in their right mind would ever trust a repaired hammer handle! Just buy a new one, job done!

@inventorK20 Ай бұрын

Thank you for commenting and sharing, my good friend, have a nice day

@andrewwalsh531 Ай бұрын

not only that but the waste of time involved is huge....new hammers are cheap!

@AquiliferArgentus Ай бұрын

A carpenter or other tradesman working a commercial job would be open to incredible liability using a repaired hammer handle. Even in your home or garage, working around possessions, home furnishings, friends, and family, you are just one swing away from catastrophe. For the price of a commercially purchased handle, you have just transferred your liability to a well-insured company that must meet product liability standards.

@Cyberdactyl Ай бұрын

A new hammer handle $12. A sketchy repair and the handle breaks and smashes you in the teeth = $2200 in dental bills.

@billnoname8093 Ай бұрын

@@Cyberdactyl don't worry the toxic fumes will screw you up long before you smash your teeth

@gravedodger1 Ай бұрын

Great timing thank you ... i had just received a new hammer in the post to replace my old broken one ... i was able to use the packing polystyrene to fix my old hammer, threw the new one in the bin as it was no longer needed ... awesome.

@inventorK20 Ай бұрын

Hello, thank you very much for your positive comments to us. You are a good friend. We look forward to receiving your support in the near future. Wishing you and your family a happy new day

@mediaguardian Ай бұрын

I guess one good sarcastic reply deserves another.

@bernhardh1142 Ай бұрын

😂😂😂👍

@seshadrisrinath Ай бұрын

Packaging polystyrene ? Styrofoam ?

@gravedodger1 Ай бұрын

@@seshadrisrinath affirmative

@mediaguardian Ай бұрын

First, all you really need is a pole connector (a two ended threaded screw). You can also use a little epoxy to Strengthen the connection. And you have to be careful to align the opposing holes. But by the time the joint sets and is ready for use it is much simpler to put on a new handle. As most carpenters, blacksmiths, etc would do.

@inventorK20 Ай бұрын

Thank you for your comments and shares, thank you for the extremely valuable knowledge you bring to us, I will use them, thank you my good friend, Have a nice day! nice day

@Hanimichal Ай бұрын

need to be in love with that handle to spend time fixing it instead taking new one 😊

@inventorK20 Ай бұрын

Hello, nice to chat with you, thank you for your interest and sharing, have a nice day💖 💖 💖

@RAYGAZOIL Күн бұрын

C'est la seule explication... Ça m'arrive avec des objets dont je connais la provenance et l'histoire... Some kind of "mana". You're right, anyway: better use a new tool and keep the old one somewhere in the garage, for the mighty magic protection it gives...!

@user-bm7vs9sw2p 2 ай бұрын

Всем известно что делает кот, когда ему делать нечего.

@user-yd9jv7or5y 2 ай бұрын

Таких тупых и Безруких котов не бывает.

@inventorK20 2 ай бұрын

Hello, nice to chat with you. Maybe what I do makes you unhappy. I will try to make it better. Thank. Have a nice day.

@user-do8ct6rw2m Ай бұрын

Нравится пусть занимается, а на самом деле нужно насадить на другой черенок.

@user-yd9jv7or5y Ай бұрын

@@user-do8ct6rw2m да ради бога, пусть занимается. Всякой хернёй.

@user-do8ct6rw2m Ай бұрын

@@user-yd9jv7or5y мы посмотрели ему уже плюс, а там уже нравится или нет это мнение в комментариях. Сейчас таких людей много. За это время легче самому черенок изготовить.

@Viktor_Pertsovich Ай бұрын

проще и быстрее выстругаит новую ручку для молотка )))

@newchiche Ай бұрын

in France, we often say with a laugh : why make it simple, when you can make it complicated

@Viktor_Pertsovich Ай бұрын

@@newchiche логично... когда коту делать нечего, он яйца лижет )))

@Viktor_Pertsovich Ай бұрын

@@newchiche между сделать глупость и усложнить, большая разница !!!

@newchiche Ай бұрын

сделать что-то сложное не значит сделать что-то глупое.

@ju1ceman802 Ай бұрын

Ручка 100₽ стоит Но ты посмотри видос, потрать еще пару часов на ремонт ручки,испорти стакан, получи люлей от жены и потом можешь хвастаться соседу «как ты круто ручку молотка отремонтировал»

@frankhornby6873 Ай бұрын

WHY DID I WATCH THIS???....😱

@otmarraus8060 Ай бұрын

Because now you know how to fix the broken hammer, finally. Of course.

@reynaldoquirozquiroga5900 27 күн бұрын

Nuevo mango es la solución y no perder el tiempo buscando soluciones que no duran.

@Gingerwhale Ай бұрын

Thanks for posting this fix. However as mentioned by others I would prefer just obtaining a new handle at a local hardware store. Also this fix removes about 4-5 cm of hammering leverage. Finally breathing petrol and foam fumes does not seem very wise.

@inventorK20 Ай бұрын

Thank you for your comments and shares, thank you for the extremely valuable knowledge you bring to us, we will try to improve it, thank you my good friend ❤️ ❤️ ❤️, Have a nice day! nice day! nice day

@user-xm9gi4ns7x Ай бұрын

Из серии-стирать презервативы.

@user-xm5tb1ll2w 2 ай бұрын

Кучу клея, шпилька, время проще купить новый черенок

@user-yd9jv7or5y 2 ай бұрын

Я больше скажу: со шпилькой тупой развод. Всё, что он делал было вкривь и вкось.

@user-yd9jv7or5y 2 ай бұрын

Тупой монтаж. Тупой во всех смыслах.

@user-ec1xu5fi2p Ай бұрын

нахрена покупать из любой чурки сделать два пальца ....... .

@paksilevivan4406 Ай бұрын

Взять ножку от стула или табурета.

@user-tt6ym1vd7c Ай бұрын

@@paksilevivan4406 И, следующее видео, как сделать ножку для стула, если одной не хватает...))

@iogangrozny9228 Ай бұрын

Надо же, как же я раньше без этого жил? Хотя в жизни не видел переломанной ручки молотка.

@user-jk8eo1hh7m Ай бұрын

За это время можно три новых рукоятки выстрогать

@inventorK20 Ай бұрын

Hello, nice to chat with you, thank you for sharing ❤️ ❤️ ❤, my good friend, have a nice day

@GeorgMcAl Ай бұрын

Вручную сверлить без отклонения осей надо талант иметь!😏 ...и да, скорее новую рукоятку сделать можно!😜

@inventorK20 Ай бұрын

Thank you for your comments and sharing with us, thank you, Have a nice day

@dowtingtomas.695 Ай бұрын

Finally ! I broke my hammer 13 years ago , but just this last month I repaired it with this video ! Only cost me 10 hours of work and 10 bucks for equipment. Lucky I didn’t waste time and money on a handle 😂😂😂😂😂😂😢

@inventorK20 Ай бұрын

Hello, nice to chat with you, thank you for sharing ❤️ ❤️ ❤, my good friend, have a nice day

@georgemacdonald5282 Ай бұрын

I can see the sense in the video telling us how good the adhesive is but I think you used the wrong guinea-pig as a hammer shaft could be renewed in a very short time and since you used a bolt to join the two half's then any adhesive would have done, try it on a different subject.

@anmael3544 Ай бұрын

Thank you for the video, in principle. I can see this being useful for fixing something that is not as cheap and replaceable as a hammer...

@Alotipsalo Ай бұрын

"Thank you for another amazing video! Your demonstration of repairing a broken hammer handle using foam and glue was not only fascinating but also incredibly practical. The way you explained each step made it easy for even beginners like me to understand and replicate. The key lesson I took away from this is that with a little creativity, even the toughest problems can be solved. Can't wait to try out this technique on my own woodworking projects!"

@inventorK20 Ай бұрын

Hello, thank you very much for your positive shares, ❤️ ❤️ ❤, you are a good friend, we look forward to receiving your support in the near future. Wishing you and your family a happy new day

@iangreen4572 Ай бұрын

It's quicker and easier to buy a new hammer.

@inventorK20 Ай бұрын

Hello, nice to chat with you, thank you for your interest and sharing, have a nice day💖 💖 💖

@Jerlynvins Ай бұрын

No glue will hold up to the forces of repeated hammer strikes.

@inventorK20 Ай бұрын

Hello, nice to chat with you, thank you for your interest and sharing, have a nice day💖 💖 💖

@D.B._Cooper Ай бұрын

Зачем я сидел и смотрел это? Ведь ежу понятно, что ремонтировать ручку молотка - идиотская идея.

@joseph-ui2xc Ай бұрын

Not only has the strength of the hammer being compromised but it's also shorter just buy a new handle and be done with it ☺️

@inventorK20 Ай бұрын

Thank you for your comments and shares, thank you for the extremely valuable knowledge you bring to us, thank you my good friend ❤️ ❤️ ❤, Have a nice day! nice day! nice day

@12101967sim Ай бұрын

Плотники такой хуйней не занимаются. Изготовить новую рукоять минутное дело. Это будет самый надёжный и безопасный вариант!

@cristobalgarcia1976 Ай бұрын

No es mas facil cambiar el mango?

@inventorK20 Ай бұрын

Thank you for your comments and sharing, we use batteries as solder for aluminum, thank you for your interest, have a nice day

@cristobalgarcia1976 Ай бұрын

@@inventorK20 es buena idea, pero precisamente como solucion para un martillo, donde la solucion de cambiar un mango es tan facil, no la veo mejor.

@user-zs4bs4yv4n Ай бұрын

Yo haria un mango nuevo.......soy carpintero........media hora me lleva......ademas me quedaria derecho............y mas fuerte.......

@Antonioperezperez41 Ай бұрын

@@user-zs4bs4yv4nYO también soy carpintero con cuarenta años de experiencia.Me sale más barato comprar un mango en la ferretería por 2 € que utilizar las máquinas en rebajar madera ,hacer el mango y barnizar lo,no vale la pena.

@veger2001 Ай бұрын

Using this idea to fix a hammer is hugely impractical however the idea itself could but used for other repairs.

@inventorK20 Ай бұрын

Hello, thank you very much for your positive shares, you are a good friend ❤️ ❤️ ❤., We look forward to receiving your support in the near future. Wishing you and your family a happy new day

@rameshrao7759 Ай бұрын

Amount you spent & time you spent you can buy the spare handle or very easy to make a fresh one.

@inventorK20 Ай бұрын

Hello, nice to chat with you. Thank you for your interest and sharing❤️ ❤️ ❤️, Wish you a nice day.

@valerazdorovec9422 Ай бұрын

Чем бы дитя не тешилось, лишь бы не вешалось😂😂😂

@user-gl4gq5kp4m Ай бұрын

Лишь бы онанизмом не занималось.

@singincowboy36 Ай бұрын

they still sell handles for hammers if your attached to the old one

@inventorK20 Ай бұрын

Hello, nice to chat with you, thank you for your interest and sharing, have a nice day💖 💖 💖

@user-qj2fp2pe5g Ай бұрын

I win! I had a bet with myself that this long-time carpenter would use a hacksaw to cut the handle parts.

@inventorK20 Ай бұрын

Hello, nice to chat with you my good friend, have a nice day

@boban1553 2 ай бұрын

Поговорка "заставь дурака молиться ,он лоб расшибет" В действии....

@inventorK20 2 ай бұрын

Hello, nice to chat with you. Thank you for your comments and sharing with us. Have a good day

@user-zb4tr4fh1b Ай бұрын

Сие называется сверхбедность, заштопал г-дон менной проволкой

@pavelsoviet9008 Ай бұрын

Дешевле , безопаснее и выгоднее купить новую рукоятку.

@inventorK20 Ай бұрын

Hello, nice to chat with you. Thank you for your comments and sharing with us❤️ ❤️ Have a nice day

@haradsalip9966 Ай бұрын

Crazy idea. Why not buy a new hammer, or make a new handle.

@inventorK20 Ай бұрын

Thank you for commenting and sharing, my good friend, have a nice day

@user-yq6ou4xg6p Ай бұрын

Смысл ролика не в том как ремонтировать молоток, а в том что бы показать возможности клея

@user-uc2db7lf1z Ай бұрын

За это время я сделал бы новую ручку из твердого дерева. Она бы была лучше ремонтной

@inventorK20 Ай бұрын

Thank you for your comments and shares, thank you for the extremely valuable knowledge you bring to us, thank you my good friend ❤️ ❤️ ❤, Have a nice day! nice day! nice day

@frankhornby6873 Ай бұрын

😱...WHY DID I WATCH THIS???

@inventorK20 Ай бұрын

Hello, nice to chat with you. Thank you for your comments and sharing with us❤️ ❤️ Have a nice day

@darkshaman7087 Ай бұрын

Me buy a new hammer

@inventorK20 Ай бұрын

Thank you for your comments and sharing with us, thank you, Have a nice day

@darkshaman7087 Ай бұрын

@@inventorK20 good idea but myself also uses an estwing so will not break, I have used poly and melted it in petrol to use as a filler on shed roof repairs

@Gieszkanne Ай бұрын

Or just a new handle

@darkshaman7087 Ай бұрын

@@Gieszkanne yes, but for a price of a hammer I sooner buy one with a metal shaft

@cclye3267 25 күн бұрын

@Inventor K, I respect your interest to post creative DIY repairs. My salute on your efforts. There is just a principle that certain items should not be repaired and re-used as they can lead to dangerous consequences for the users. Eg hammer handle, knife handle, saw handle, foot of chair etc. All these magic repairs using super glue and styrofoam or melting down plastic cable ties are great to repair broken plastic surface which pose no danger if the repair fails. All the best.

@inventorK20 23 күн бұрын

Thank you for your comments and shares, thank you for the extremely valuable knowledge you bring to us, thank you my good friend ❤️ ❤️ ❤, Have a nice day! nice day! nice day

@robertalexander7661 Ай бұрын

What's wrong with just getting a new handle?

@otmarraus8060 Ай бұрын

Too easy! This is much more fun."

@maxpinson5002 Ай бұрын

I have several ball peen hammers of different sizes, but I don't use them for driving nails

@melvinsutton5984 Ай бұрын

Wow!! a ballpeen hammer for nailing a board 😮

@Chatsky69 2 ай бұрын

An elaborate procedure for emergencies. But not really economical and environmentally friendly. It would be better to get a new wooden handle.

@inventorK20 Ай бұрын

Hello, thank you very much for your positive comments to us. You are a very nice person, nice to meet you. We look forward to receiving your support in the near future. Wishing you and your family a happy new day

@charleslamica5123 Ай бұрын

It's a heck of a lot easier to replace the handle rather than go through all that trouble to repair the broken one.

@johnhiggs325 Ай бұрын

That’s a lot of extra work. Why not just buy a new hickory handle?

@inventorK20 Ай бұрын

Hello, nice to chat with you ❤️ ❤️ ❤, thank you for sharing, we will improve it, My good friend, have a nice day

@johnhiggs325 Ай бұрын

@@inventorK20 It was still awesome to see how strong that mixture can be.

@ksman9087 Ай бұрын

That's a lot of work when you can just get a new hammer handle at your local hardware store for about $7.50.

@inventorK20 Ай бұрын

Hello, nice to chat with you, thank you for sharing ❤️ ❤️ ❤, my good friend, have a nice day

@maxcarter3413 25 күн бұрын

I am speechless.

@govindraghav5236 Ай бұрын

Funny... The cost - material plus efforts involved - is much more bigger than buying you a new sturdy handle..

@JackRoyal82 Ай бұрын

i would rather replace the wooden handle than going through all the trouble

@tdkreatif 2 ай бұрын

Trik anda sangat luar biasa bagus kawan👍🙏🙏🙏🙏

@inventorK20 2 ай бұрын

@user-jm6oz5fb4g 2 ай бұрын

Даже заморачиваться не стану, просто приварил железную ручку и все

@magnumkgb1766 Ай бұрын

Не жалеете вы свои руки. Да и есть такие работы, что физически не выдержать такую отдачу!

@user-jm6oz5fb4g Ай бұрын

@@magnumkgb1766 нормальная отдача, для 1,5 кг молотка. Мне же не ковать им) хотя и было дело, вот уж как 5лет как мделпл его на рмботе все не нарадвюсь что пошел на конкретные меры!

@user-wq3uu7hi3b Ай бұрын

Я не люблю железные ручки, сделать черенок из доски старого поддона, делов то пол часа.

@FILM...ZEMLRNE 10 күн бұрын

Из резины делай ручку,амортизация будет супер,но это в том случае если ты целыми днями долбишь молотком,а так ....можно и железную

@user-cg3fg3db8p Ай бұрын

In der Zeit hätte ich schon lange einen Hammer im Baumarkt besorgt . 😉

@inventorK20 Ай бұрын

Thank you for your comments and sharing with us. Have a good day

@bernhardh1142 Ай бұрын

Vielleicht sind Baumärkte in Russland im moment nicht so gut bestückt, aus Gründen. Die Industrie hat wohl anderes zu tun als Hammerstiele für zivile Zwecke herzustellen, wer weiß ;)

@user-ev8tr5fh1o 25 күн бұрын

Резка ножом пенопласта - лучший АСМР.

@billmccart2861 Ай бұрын

Lots of wasted time for the cost of a new hammer

@ChankwokmanChan 17 күн бұрын

無錯好始,鐵鎚都買不起吧！

@Aleksej.Yudin.96. Ай бұрын

I'm a carpenter. In situations like this, I buy a new handle.

@inventorK20 Ай бұрын

Hello, nice to chat with you, thank you for sharing, I'm happy that what I do can help people ❤️️ ❤️. ❤Thank you. Have a good day

@kuval58 2 ай бұрын

нормальную ручку поставить можно было несколько раз за это время

@inventorK20 2 ай бұрын

Hello, nice to chat with you again. We look forward to listening and absorbing your good ideas. We will try to improve what you say. Dear friends, Wishing you a happy new day.

@kuval58 2 ай бұрын

@@inventorK20 thank you for your comment, appreciate. Your way to repaire is practical indeed, just is more complicated than traditional. All the best, good luck😀

@randyvillanueva911 Ай бұрын

It's took long time b4you fixed it and you have 2buy bolt for me just took a hardwood and make another1much easier and much stronger than the original handle

@quini8040 Ай бұрын

Esta muy buena la Reparacion del martillo pero le falto la proteccion de la Maquina que corta fierro. Para tener mayor proteccion. Gracias esta muy bueno. Saludos desde CHILE.

@inventorK20 Ай бұрын

Hello, nice to chat with you, I'm happy that what I do can help people ❤️️ ❤. ❤Thank you. Have a good day.

@raymonditi4596 Ай бұрын

i think you could learn alot more from a carpenter .for instance using correct wood saw not an engineers saw for metal ,and the other thing wow why didnt you put the handle back in the vise when drilling .a little slip and youll have a hole in your hand...if this is on your video what else are you doing wrong

@inventorK20 Ай бұрын

Thank you for your comments and shares, thank you for the extremely valuable knowledge you bring to us, thank you my good friend, Have a nice day! nice day

@maxpinson5002 Ай бұрын

Thanks for spelling "VISE" correctly in your comment. Using the right word in the proper context is a vice of mine

@jaydblog Ай бұрын

My hammer has no wood handle, just steel. If it is broken, I’d buy a new one.

@inventorK20 Ай бұрын

Hello, nice to chat with you, thank you for sharing, my good friend, have a nice day

@josephkaminer2337 Ай бұрын

I'll just buy a new hammer, thank you!😂

@inventorK20 Ай бұрын

Hello, nice to chat with you, thank you for sharing ❤️ ❤️ ❤, my good friend, have a nice day

@AmazingSmart-ngth Ай бұрын

Thanks for sharing, great idea

@inventorK20 Ай бұрын

Hello, thank you very much for your positive shares, you are a good friend ❤️ ❤️ ❤. We look forward to receiving your support in the near future. Wishing you and your family a happy new day

@KarlHeinzSpock Ай бұрын

in germany, we call such solutions: driving the church around the village. 🤣🤣🤣 nevertheless: i enjoyed the video, and it is undoubtedly a solution. a complicated one, but it works.....

@aureliomorales7449 Ай бұрын

yo soy de la REPÚBLICA de PANAMÁ GRACIAS POR TÚ VIDIO.

@inventorK20 Ай бұрын

Hello, nice to chat with you, a friend from REPUBLIC OF PANAMA, I'm happy that what I do can help people ❤️️ ❤. ❤Thank you. Have a good day.

@jorgerueda1715 Ай бұрын

Una muy buena alternativa para reparar la herramienta. Saludos... 👍👍

@inventorK20 Ай бұрын

Hello, thank you very much for your positive shares, you are a good friend ❤️ ❤️ ❤. We look forward to receiving your support in the near future. Wishing you and your family a happy new day

@cvsreekumar9120 Ай бұрын

New info, thank you!

@inventorK20 Ай бұрын

Hello, nice to chat with you, I'm happy that what I do can help people ❤️️ ❤. ❤Thank you. Have a good day.

@user-uv7oe9nj9u 27 күн бұрын

проще и быстрее выстругаит новую ручку для молотка ))) it will be easier and faster to plan a new hammer handle)))

@inventorK20 27 күн бұрын

Thank you for your comments and shares, thank you for the extremely valuable knowledge you bring to us, thank you my good friend ❤️ ❤️ ❤, Have a nice day! nice day! nice day

@user-bf8qe6ex8m 14 күн бұрын

Техника безопасности,не пустые слова

@user-zm5um3ev4o 2 ай бұрын

О Боже! До чего же вы европейцы тугие! 😂 Я в школе на уроке труда, 4 урока(4часа ) молоток изготавливал, в возрасте 12 лет! Слава СССР!

@Vlad1830 Ай бұрын

Слава КПСС!

@bernhardh1142 Ай бұрын

Я слесарь, и во время учебы я тоже сам подтачивал головки молотков, но стандартные инструменты я до сих пор сам не делаю. А ремонтировать рукоятки молотков настолько бессмысленно, что вы никогда не получите той устойчивости, которую имеет неповрежденная рукоятка.

@antoninoercolano4443 25 күн бұрын

Sei un genio!!!!!!!!😭😭😭

@inventorK20 25 күн бұрын

Hello, thank you very much for your positive shares, ❤️ ❤️ ❤, you are a good friend ❤️ ❤️ ❤️, we look forward to receiving your support in the near future. Wishing you and your family a happy new day

@sun7production Ай бұрын

I think the fix is more so a teaching of how broken wood in general can be securely bonded than it is the salvaging of a broken hammer handle.

@Chang-cp3bq Ай бұрын

những mẹo rất hay, tôi rất thích xem video của kênh

@inventorK20 Ай бұрын

@brunoarcayacastagnino2770 Ай бұрын

Mas fácil y mas seguro...me compro un mango nuevo 😂

@inventorK20 Ай бұрын

Hello, nice to chat with you, thank you for sharing ❤️ ❤️ ❤, my good friend, have a nice day

@siamakazarian3583 Ай бұрын

Thanks

@inventorK20 Ай бұрын

Hello, nice to chat with you, I'm happy that what I do can help people ❤️️ ❤. ❤Thank you. Have a good day.

@miguelmartincano4735 Ай бұрын

No es más fácil y barato ir a la ferretería y comprar un mango?

@dimik3855 Ай бұрын

Well my friend, be careful not to miss anymore hammer blows since the wood will probably crack.

@inventorK20 Ай бұрын

Thank you for your comments and sharing, thank you for the extremely valuable knowledge you bring to us❤️ ❤️ ❤️. Thanks my good friend, Have a nice day! nice day

@user-nh4yv5ne5r Ай бұрын

А плотники со стажем не страдают такой ерундой. Если ручка сломалась на молотке делают новую

@williammouri1096 23 күн бұрын

I am assuming tools and handles are expensive or hard to find where you live. If so, good idea. I've got fiberglass or hickory replacements right down my street for a couple dollars.

@inventorK20 17 күн бұрын

Thank you for your comments and shares, thank you for the extremely valuable knowledge you bring to us, thank you my good friend ❤️ ❤️ ❤, Have a nice day! nice day! nice day

@AllanRice Ай бұрын

I appreciate the video and inventivnes 😂😂

@inventorK20 Ай бұрын

@JohnSmith-us2ru Ай бұрын

This is way easier than driving up the street and buying a new one. Sarcasm.

@mathew8 Ай бұрын

Здорово, только неизвестен состав клеящего материала... И не проще ли купить новый молоток?...

@inventorK20 Ай бұрын

Hallo, vielen Dank für deine positiven Beiträge, ❤️ ❤️ ❤, wir werden versuchen, es zu verbessern, du bist ein guter Freund ❤️ ❤️ ❤️, wir freuen uns darauf, dich in naher Zukunft zu unterstützen. Ich wünsche Ihnen und Ihrer Familie einen schönen neuen Tag

@mathew8 29 күн бұрын

@@inventorK20 heh, nun war es mindestens eine gute Uebung, ganz nuetzlich zu sehen :)

@hectorortiz1752 10 күн бұрын

Excelente

@inventorK20 7 күн бұрын

@MakeHann Ай бұрын

Первобытные люди с их прочными каменными молотками долго бы смеялись, увидев такие технологии.😁

@Jose-fk5pq Ай бұрын

Mas , como ideia , meus aplausos.

@inventorK20 Ай бұрын

Hello, nice to chat with you, thank you for your interest and sharing, have a nice day💖 💖 💖

@kestutisbagusauskas8323 Ай бұрын

Cheaper and quicker to make a new handle. You have to be spot on to drill those holes they have to be as accurate as for dowels otherwise your handle will end up like a dog's hind leg!

@gregstephens2339 Ай бұрын

He could have made anew handle in half the time

@user-of1kk8hn9v Ай бұрын

А ведь он по своему молодец! Показал заведомую дурь, но заработал кучу просмотров, 😅 !

@gadams47 Ай бұрын

That's a mechanics hammer pal. Try a claw hammer thats what "chippies" use.

@jairtoncosta8166 Ай бұрын

Legal sua ideia

@inventorK20 Ай бұрын

Hello, thank you very much for your positive comments to us. You are a good friend. We look forward to receiving your support in the near future. Wishing you and your family a happy new day

@BUJHRF Ай бұрын

плотники со стажем.просто сделают новую ручку.это быстрей чем клеить старую))))

@ebw_servant_of_GOD Ай бұрын

But the new handle for a couple bucks and put it on.... Quick easy and reliable...

@inventorK20 Ай бұрын

Hello, thank you very much for your positive shares, you are a good friend ❤️ ❤️ ❤, We look forward to receiving your support in the near future. Wishing you and your family a happy new day

@marctiltman9555 17 күн бұрын

2:15 Always have drills facing away from hands and other body parts.

@alexandrepercinculadossant8146 Ай бұрын

Muito mais fácil e rápido seria trocar o cabo😊

@inventorK20 Ай бұрын

Thank you for your comments and shares, thank you for the extremely valuable knowledge you bring to us, thank you my good friend ❤️ ❤️ ❤, Have a nice day! nice day! nice day

@meysam9 Ай бұрын

Good job

@inventorK20 Ай бұрын

Hello, thank you very much for your positive shares, you are a good friend ❤️ ❤️ ❤, We look forward to receiving your support in the near future. Wishing you and your family a happy new day

@TechnoViking2 Ай бұрын

Qué precisión 😂

@Wolfspiderxl Ай бұрын

This is the kind of repair you'd effect ìf the shops were all closed and you really needed to use that hammer.

@CarlWinter-oy8uf Ай бұрын

The alignment of the two broken Hamme handle halves ---drilling each broken bit requires precision ---other wise joint will be crooked ! always!

@inventorK20 Ай бұрын

Thank you for your comments and shares, thank you for the extremely valuable knowledge you bring to us, my good friend, have a nice day

@jolox. Ай бұрын

Fun video! Thanks! Where do you get the glue/solvent in America? What is it? Does Home Depot sell it? We have Gorilla glue, but is this something else? 🙂

@inventorK20 Ай бұрын

Hello, nice to chat with you, it is 502 glue produced in my country, Thank you for sharing with us, have a nice day

@seshadrisrinath Ай бұрын

What is lather ? Which country is it available in ? Cos in US I've never seen it. Cool trick, but hammers and handles are dirt cheap, there is some other applications I would use it for. Like a vintage amplifier case.

@inventorK20 Ай бұрын

Hello, nice to chat with you, thank you for your interest and sharing, have a nice day💖 💖 💖

@user-lu8lf7lh8m Ай бұрын

А знакомые плотники после такого урока не засунули тебе этот молоток в одно место?

@rumynKSF Ай бұрын

плотникам со стажем я порекомендую изготовить новую,нормальную рукоятку для молотка...тем более,что это не составляет никакой сложности..

@irenecruz7290 2 ай бұрын

Buenas tardes se ve que el pegamento que elaboras es efectivo pero que es solo se que es un pedazo de uno CEL pero el líquido no se que es soy de puebla felicidades de cualquier forma si pudieras decirlo porfavor gracias

@inventorK20 2 ай бұрын

Hello, thank you very much for your interest. That liquid is gasoline. When combining gasoline with foam, it will create a glue with very good adhesion. Have a nice day.

@antonioacevedodiaz5910 Ай бұрын

ES ICOPOR O POLIESTIRENO LO TRAEN LOS ELECTRODOMESTICOS PARA PROTECCION , TAMBIEN PEDE UTILIZAR GOTA MAGICA CON BICARBONATO