#bmw #bmwe60m5 #bmwe60 In this video i show how to properly set vanos clearance , most people do this wrong and it could be the reason for early engine failure EVERY BMW OWNER Is Doing This All Wrong !!!
Пікірлер: 25
@tpazera1221 Жыл бұрын
You are using the wrong tool to measure lash. You can't use a regular dial indicator because you can't put it against the tooth, it's way too big. You need a test indicator and the correct angle in between the teeth.
@Iwillnotbepushed Жыл бұрын
Good video with rally good info. Big job.
@johncoss5604 Жыл бұрын
Nathan’s Porsche workshop great content
@DuaneMoore Жыл бұрын
That engine is beautiful
@robertthrem3382 Жыл бұрын
Torque it again with a short extension just so we can see how much difference it is then long one😮
@123hoffie Жыл бұрын
You beat me to it 👍
@petergoz7453 Жыл бұрын
Nice video Nathan, what a great engine & a massive job....might i suggest that that big long extension won't give u the correct torque, torque it with no extension for the correct torque, if clearance is insufficient for a short socket then use a deep socket, also i would suggest that not only the lub goes on the threads but also under the head of the bolt(provided that BMWs spec is for a lubbed torque & not a dry torque-lubbed torque will always go tighter than a dry torque)but i image u are all over that & it is a lubbed torque...good luck with your build.
@jeffreyhinman1397 Жыл бұрын
Believe it or not you don’t lose much if any with an extension, however a swivel is a definite killer, or an adapter.
@hamie63_m Жыл бұрын
I feel like you and I are the only people left who give a damn about the S85
@BmwMe-uh9sy Жыл бұрын
theres hundreds of thousands of people who still praise it, yall not the only ones little man
@hamie63_m Жыл бұрын
@@BmwMe-uh9sy 🥲
@brucepeninsula2036 Жыл бұрын
AND ME
@jeffreyhinman1397 Жыл бұрын
Had to repost the video I’m guessing cause monetization?
@keemoify Жыл бұрын
Sorry for asking this here. I saw you had a video about the 3 stage manifold for the n52 and was wondering, will the 3 stage manifold fit my n52. 523i. 2.5? Its the exact same engine as the 525i isnt it!?
@keemoify Жыл бұрын
@Cm. Kosmos no, N52.
@keemoify Жыл бұрын
@Cm. Kosmos this engine kzbin.info/www/bejne/oHnMgohom919bbc
@keemoify Жыл бұрын
@Cm. Kosmos yes.
@JimmyGambiniEsquire Жыл бұрын
Doing it wrong???!!! … THAT’S what SHE said ! 💥😉👊💫
@tristanmacc Жыл бұрын
hey nathan, im a junior in highschool still trying to get my hands on a first car. keep seeing bmws i like but am hesitant on getting one, what are your thoughts? i am willing to spend effort and money on maintenance but my budget is still limited.
@brucepeninsula2036 Жыл бұрын
DON'T BUY A BMW IN HIGH SCHOOL. WAIT TILL YOU GET A GOD JOB AND IMPROVE ON HANDS ON SKILLS MEAN WHILE. THEN YOU'RE READY. GOOD LUCK!! TRY YOUR BEST TO GET AN M MODEL.
@tristanmacc Жыл бұрын
@@brucepeninsula2036 thanks bruce
@hitom43 Жыл бұрын
e46 with an m43 is pretty reliable and cheap. Weak spots are rust, some bushes that repeatedly fail and normal stuff.
@tech42long35 Жыл бұрын
Sehr gut, sehr gutes Video. Ich habe viel gelernt und es genossen. Nathan ist der beste Mechaniker aller Zeiten.!
@teufelhunden2820 Жыл бұрын
THIRD!!
@jocrp6 Жыл бұрын
Hey Nat! I just serviced a 2015 Toyota 4-Runner with 100K miles and the bottom of truck was dry as a bone, Not even a seep of anything,, Think the krauts could learn something from the Japs?