EVERY Chevy Engine LEAKS Oil

[@MattsShop]

This is every Chevy oil trick I know! The intake manifold gaskets leak air not oil I misspoke lol I ment they get gunked with oil. Intake Manifold Gaskets: amzn.to/48HxZUS Oil Pan Gasket: amzn.to/3NOVbZa Mobil 1 Oil: amzn.to/3TLX50w Valve Cover Gaskets: amzn.to/3H7NGbS WIX Long Oil Filter: amzn.to/3Sf6Rap Oil Drain Plug Seal: amzn.to/3S21OK2 Oil Pickup Tube O-Ring: amzn.to/3S33uTK As an Amazon Associate I earn from qualifying purchases.

[@ChunkMoney91]

Do you need to add rtv to the oil pan gasket linked in you comment

[@p.b.3443]

Great videos. I have an 01 1500 Silverado Hd with 193k miles. The truck has been maintained perfectly through its life. It leaks coolant, power steering fluid and oil. Do you think it's worth it to repairor just buy some fluid here and there?

[@brycemiller8294]

@@MattsShop check your transmission fluid with engine running and switch through a few gears, before reading the stick!

[@brycemiller8294]

@@MattsShop your a dip💩🤡 for highlighting some guy who freaked out on me for no reasons reply 🤣🤣🤣🤣 be bias if you want idgaf🖕✌️💯

[@Flub_Kub]

​@p.b.3443 if it's your baby, it's worth fixing.

[@codymcglaughlin5258]

I have an 05 Tahoe with a 4.8, all of these videos are super useful. Thank you.

[@MattsShop]

You're welcome!

[@Langloiswad]

@@MattsShopHello I own a Chevrolet express 6.0 LQ4 with 90,000 miles, I live in France in a region where the climate is temperate, I do 6000 miles per year, I mainly drive in summer at 100°F, and I tow constantly a 6000 lbs trailer, should I stick to the oil recommended by the manufacturer 5W30 or can I use a 5W40 which is supposed to resist heat better?

[@condor5635]

Transmission dip stick. Make/scribe your own mark to use when engine cold and off. 285k on mine and always correlates exactly to the manual explained way of checking it after its hot and being at the top hash marks. Gives you ability to check whenever you want

[@TheGreatEscape77]

I just got a 99 5.3 and i love the truck definitely useful videos 👌

[@MattsShop]

Thanks man. Love the GMT800 trucks

[@RubenTevreden-q7t]

I have a chevy ❤ 2003 pick-up Braziliaan with oil leak below Just renew front motor seal but is stileakig i help me out how to Fix Pls 10:32

[@TurnThemWheels]

2013 Chevy Silverado 1500 P219A Chevy 5.3 Replaced injectors (Acdelco) Replaced upstream oxygen sensors (Denso) Replaced plugs and wires (Acdelco) Cleaned throttle body (Relearned Throttle body - scan tool) Replaced purge valve (Acdelco) Cleaned Mass air flow sensor Replaced air filter Running 5QT Full Synthetic 1QT Rislone Treatment Running range afm disabler obd2 Live data looks goods, MAF,MAP,No Misfires Fuel trims usually look good, oil pressure is good

[@spelunkerd]

The other thing that will fool you on these old chevys about a possible rear main seal is a leaking oil pressure sending unit. It's above the rear main so if that sending unit leaks it drips down and you'll think it's a rear main. Old chevys also had a tendency to leak from the front left inboard axle seal. Above that seal is a large round plastic cover with a vent tube attachment. That cover can also leak and fool you into thinking the axle seal is leaking.

[@MattsShop]

Yeah, it's true. Those seals will leak down and trick you. You'll think the rear main seal leaks, and it doesn't. Most guys keep saying they swapped the rear main seal, and it still leaks. That's why they have problems.

[@chrisprada9901]

Do these leaks appear on driver side wheel well? Having trouble finding small leak it doesn’t get on my driveway , could this be the sending unit ? 04 2500HD

[@97GibsonsgOhyeah]

Oil streaming from the bell housing, for sure. My 01 4.8l made a puddle under the trans tail. Changed the sender. Boom, the sender was saturated.

[@ASEWorldClassTech]

There were allot of things you left out. Allot of times leaks towards the rear of the oil pan can come from a Cam Sensor on Gen 3 & lower or the Oil pressure sending unit. They will leak oil down and onto your starter bolts and oil filter. Also the rear main seal & cover gasket like to leak oil as well. The rear main seal cover gasket is overlooked allot. Also the reason you have moisture on the oil cap is because your PCV system isn't working correctly. Some engines have a make shift PCV valve that's not really a valve but the little tiny port on the Driver Side valve cover "The Dirty Side" gets clogged. That is the port that dumps oil into your intake manifold. On some LS engines GM has a updated Drivers Side Valve Cover. Good Luck!

[@rm5902]

Mny Thx

[@leebuck180]

thanks for the video and the oil filter number. in a pinch, an oil filter for a 2014 Chevy Impala will work.

[@MattsShop]

You're welcome. The longer WIX filter doesn't come up at most parts stores.

[@shakka65]

i have a 2003 4.8l Chevy Silverado 1500 LS with 268,000 miles. Love this truck easy to work on. just hate where the heater core is located. Also only use Mobil 1 5W30 oil and Mobil 1 oil filter. No leaks that I know of. I change oil and filter regularly to include oil pan and transmission filter @ roughly every 60,000 miles. No major repairs so far. Thanks for the info.

[@Rick-zk9ou]

Owner since new of a 99' Silverado LT, 5.3 liter, 4x4. 200+k miles. Can not complain on the engine at all. Still runs well with general prescribed maintenance. Best part of the truck. Well done Gm! However, it does have assorted oil leaks. Miracle, lucky for those that do not. Short of seal replacements, within ease, all are original, but reality is they usually fail with age. All rejuvinator additives, in my case maybe slow the drips down. My question, if you could estimate your hours, or a shops/mechanics time on replacing all the seals as you have done on the Avalanche, what would estimate, realistically, not "repair book" shop hours, on realistic time for replacement as you have done on the Avalanche?

[@josecastrosemental]

Matt, thank you so much. I just bought a GMC sierra 2005 that I’m planning to fix it up and I know I have to change all those things big help.

[@MattsShop]

Awesome! Glad I could help. I have a lot of other Chevy tips. Check them out!

[@ThatWisco5.3]

Fixed valve cover gaskets, oil pickup tube, now rear main seal.

[@MattsShop]

Nice work!

[@332ARA]

I just did valve stem seals too. 167k miles. they needed it

[@westernsoutherner1]

I used that Mobil One Extended Performance too-2010 Silverado 5.3L with 245K Miles. Im going to start using the High Mileage in hope that some of the leaky seals soften and work better.

[@Itsme83.]

For the oil pan gasket and rear main on my 06 4.3 shop said 2k. I’ll just keep adding oil

[@arthurprice-ju7lj]

I have a 2003 Chevy Silverado with 329800 miles on it and it is all original 5.3

[@BellaRocko]

I have a 2003 Silverado 1500HD with the 6.0, all original, but only 170K miles. Great trucks!

[@PaulPena-nx2hs]

2006 5.3 supercharge 60 000 miles my bby

[@TR-qr9hs]

I got 03 cat eye 376 or 380k best truck ever i tow carry engine for uncle thsts a mechanic.

[@brycemiller8294]

@@arthurprice-ju7lj i have an 03 Sierra 6.0L 2500hd 273kmiles, runs like a dream, cant hardly hear the engine running its so smooth and quite🤩

[@boondock6055]

98 1500 with 265,000

[@ricktaylor3748]

You have to pull the engine, or drop the front differential to take the oil pan off. It's easier to pull the engine, it makes everything easier to get to. It's an all day job, or 2 or 3. I'd change the timing chain & gear, if your engine has high milage. Mobile 1 ... 10 W 30 is the way to go. Use AC Delco parts when you can.

[@MattsShop]

I agree, it is a major pain. Much easier on 2WD trucks. A real pain to do on 4x4s. I agree. Use OEM parts whenever possible.

[@thebiguy7231]

Love your content...I want to change my rack and pinon on my 02 silvarado 2wd 4.8 engine .which one do you recommend plus it has a set of 24inch rims on it and does that make a difference?

[@MattsShop]

I just get the remanufactured ones as long as it has a lifetime warranty.

[@RobertCrawford-z3m]

If you live in the rust belt and it's not a big leak like half a quart in a oil change you benefit from the coating under the vehicle.I run a 2002 lesabre from the Poconos to Morris County New Jersey 4 days a week that 3800 series 2 has a little drip but the whole underside of that car has no rust at 190000 miles,I change my oil myself usually every 4 to 45 hundred miles.

[@Charlie-dv7ev]

Every engine leaks. There isn't a single engine from any manufacturer that doesn't eventually leak.

[@MattsShop]

If it leaks oil its got oil.

[@Charlie-dv7ev]

@@MattsShop For now at least.

[@JRock84]

If theres no oil under it then there aint none in it 😂😂😂​@MattsShop

[@brad1367]

I got a two stroke that doesn't

[@Charlie-dv7ev]

@@brad1367 Go look up what 'eventually' means.

[@bensfixitpage341]

Mine used to leak... so I fixed it.. now it doesn't leak! Mine used to have low oil pressure... cam bearing fixed that. Mine used to burn oil... I found my oil wiper rings on my pistons were stuck. After freeing them... it quit burning oil. I've reused my original intake gaskets everytime I've removed the intake. Wix filters suck almost as bad as K&N filters.

[@sbc_jake_9677]

In my experience with gen 3 ls engines, they either leak a ton of oil or not at all. My 04 silverado with the 6.0 doesn't leak anything at 177k but my 00 trans am at 100k with the ls1 leaks like crazy. However, all ls engines do burn oil. I recommend getting a catch can. Especially on the DI gen 5 lt engines. Also if you change the intake gasket on a gen 3, change the knock sensors while you're there and seal them. Water will get into the sensor holes and cause them to go out

[@Mikey-wf9py]

Hey Matt, right on the nipple where the wire clicks on to the coil pack. One of mine has a crack like right on the plastic. Somebody broke a chip out of it. It's still clicks perfectly fine, but do you think that could affect it? Should I replace the coil? It seems like it's running out right? I threw a zip tie around that one too for extra love ... Whoever did it shoved a bunch of dielectric in there to try to prevent corrosion or moisture getting in I guess or arc getting out

[@wmkess]

My 2006 5.3l with 165k on it burns or leaks about a quart every 3000 miles. On mine if it has barely any oil in the dipstick and I add a quart it will take it to full mark. I basically run it for 3k miles, add a quart, and then run it until it gets low again and do a change. Equates to about 6-7k mile oil change interval.

[@MattsShop]

Sounds about right. If they get that low. I normally change the oil. If it's at the bottom of the crosshatch I normally add a quart of oil and it brings it up to the top of the crosshatch.

[@treygardener6892]

Keep the vids coming..great content..

[@MattsShop]

Thanks I will!

[@RichaRat]

It has been my experience that the oil life will not reset if there isn't enough light to keep the automatic headlights off. Being an after hours mechanic, I have used a flashlight on that dash mounted light sensor many times to reset the oil life indicator. Has anyone else noticed this?

[@RussellBooth1977]

My 5.7 litre Chevrolet Gen3 LS1 V8 engine is fitted into a 2002 model Holden VY SS Commodore which was built in Australia & it's pretty much the same engine as Holden put into the left hand drive Pontiac GTO then exported to North America. According to Holden, it takes as little over a quart of oil (1.1 litres) to bring the oil level back up to the full mark from the add mark,I normally add 1 litre of oil at the 5000 kilometre or 3000 mile mark because last time It burned through that much oil by then. I run 10W40 full synthetic engine oil due to how hot it gets in Australia although Holden do recommend using a 10W30 grade of oil,1000 kilometres (600 miles) before the last oil change I had to add another litre of oil but I used some 15W40 semi synthetic engine oil which I had lying around the shed because I didn't want to spend $23 AUD on a litre or a quart of semi synthetic engine oil. The engine doesn't appear to be blowing smoke & it's just clocked over past 400,000 kilometres (248,550 miles) & Holden considers anything below 2.5 litres or quarts oil consumption every 10,000 kilometres is acceptable. I might have some leaking valve stem oil seals which are just a tad leaky but I am not too worried about it, mine doesn't leak externally since I have resealed the engine & I have recently resealed the valve rocker covers which stopped it leaking oil so we'll see what its oil consumption is now after I replaced the oil seals !

[@LSMykie]

What’s your take on the timing cover gasket and seal?

[@MattsShop]

It's a pain to do. I leave it alone or see if the bolts are loose before I replace it lol

[@LSMykie]

@@MattsShop I’ve replaced every other seal except that one and if I start it and it leaks again I’m going to pull my hair out lol

[@madbrad7274]

What about the gasket on the plate that goes were a oil cooler would mount if it comes with 1 They all leak there

[@MattsShop]

Yes they can leak there a lot too.

[@edwincolar7646]

i have seen videos on the camshaft position sensor also can cause a oil leak on the starter wanted to know if this can cause a oil leak

[@jeffhutchins7048]

I changed my oil pump pick up o-ring by just going through the front and removing the oil pump. Not EASY but easier than pulling the pan on a 4wd.

[@MattsShop]

Yea, that's a pretty rough job. Sounds easier than dropping the pan on a 4x4 though.

[@Kenichi_one]

Oh man, I have a 4wd and I don’t want to have to do it 😢

[@jeffhutchins7048]

It's not bad until you have to actually do the oil pump to pick up bolt, there's only one.

[@stillwill1808]

The next time you drop the pan if you look you'll see two bolt holes you can use at the top of oil pick up tube. Move the bolt to the hole thats closer to front of truck. Then it can easily be removed from the front of engine. When it's time to replace the oil pump you won't have to drop the oil pan, diff, or as many f-bombs.

[@DeuceDeuce80]

Quality content. Thanks for uploading.

[@MattsShop]

Thanks, I do my best! You're welcome!

[@GweGwe-lu9ob]

My oil pressure moves up and down like very very little at idle but it never gets low just weird lol 😂 but I never get worried about it. I rebuilt my 5.3 with a performance engine kit off summit and after 3 years no leaks. But these engines do burn oil I’m at 3,000 miles since my last oil change and it burns about a quart every 3500 so it’s not bad just make sure you guys always check your oil levels every week or twice a week even without leaks keep changing your oil every 3,000 to 3500 miles

[@MattsShop]

Yes, they use a lot of oil. The updated valve cover is supposed to help with that issue, but a lot of guys don't know about that fix.

[@brycemiller8294]

You check the transmission fluid with truck running, and probably best to switch through a couple gears

[@3434abab]

I have a vortec i6 cyl and don't have this prob. What a beautiful engine it is.

[@budmanzoom4441]

Great info - thank you!

[@MattsShop]

Glad you liked it 👍

[@CliffMorris-x8z]

Thanks Matt learning a lot from your video s

[@MattsShop]

Glad to hear it!

[@longlivechina7538]

The pedal thing was so cool

[@eugeneanderson7984]

When you install the tube back into the counterbore coat it with The Right Stuff Black.

[@yashargholinia7440]

Could you please post some 4200 videos.

[@MattsShop]

I don't have one to work on!

[@petersemple9278]

2000 Sierra 5.3, and the driveway is as clean as it was when poured. No leaks for me!

[@MattsShop]

What weight oil do you use?

[@petersemple9278]

@@MattsShop 5/30 Amzoil. I bought the truck at one year old and actually had it parked for years. Squirrels kept staging attacks on my wiring harness. I moved and fixed all those things that suck on a old truck, including brake and fuel lines. Been parked on clean concrete for about 5 years now with just over 100 grand on the odometer. Looks and runs really sweet for a rustbelt truck. I don't drive her with any salt on the roads anymore. Have a good one!

[@luiscorreia6732]

Did you say you wait a year for iil change? If so your crazy. Thats just aaking for slidge build uo

[@SebastianValente-fh5di]

My truck is leaking but I changed the oil on gasket and rear main seal any suggestions

[@MattsShop]

Oil cooler block off plate, did you silicone the corners on the new oil pan gasket?

[@joewatson5773]

What it cost to change oil pan gaskets and rear seal??

[@sambiscits6711]

I have a GMC 6.2 L and the dipstick is a cable, I think a great design. Extremely Flexible.

[@papergatorzfedducca7998]

New subscriber 🔥🔥🔥🔥

[@MattsShop]

Thanks for the sub!!

[@ChrisPenton-nr5ce]

I lost all oil pressure and a lot of oil all at once in my 2003 yukon 5.3 liter can't tell if it's rear main seal or sending unit

[@MattsShop]

Don't run it like that!!! It could be the sending unit, but if you have a lot of oil leaking you got big problems.

[@longlivechina7538]

Your my hero

[@MattsShop]

You're my hero

[@TR-qr9hs]

​@@MattsShoplaterrrr man have u ever had s10?

[@MyTiresDontBurn]

Oil on my passenger side only, drips onto my starter , any tips ?

[@Purp16gold]

How much does it cost to regasket valve covers and engine block ? Any answers?

[@levintaydebrownson4968]

Probably fking 4 or 5k with how shut is nowadays

[@Kenichi_one]

Wow really? I just did the head gaskets and valve covers and intake gaskets, spark plugs and wires, deactivating cylinder solenoid replacement, exhaust manifold gasket replacement, on my 07 tahoe. Took me 2 weeks and had never done it before but it was all worth it it runs great. All from youtube tutorials. I spent abouy $700 on parts

[@moi1069]

i mean if you have a oil leak that just means no oil changes are needed bc the oil sweat allows you to add new oil

[@MattsShop]

Exactly, always fresh oil lol

[@DCBDesigns]

hey, good video. i just did a head rebuild after a head gasket going bad. After putting it all back together with new gaskets, I noticed it has a high idle around 900 RPM.. I replaced the idle sensor,02 sensors, purge valve solenoid, and I couldn't fix the problem, so I took the intake back off just now. I have the teal color gaskets that you showed in the video. I do notice some fresh oil in the intake, what would cause oil getting into the intake manifold? i'm getting p0174, p0507, and p0171.

[@Kenichi_one]

I would replace the valve covers. It’s causing oil to go up the pcv vacuum and into the intake. At least that’s what mine was doing.

[@DCBDesigns]

@@Kenichi_one Update- It was oreillys bullshit housebrand pcv valve. I got a oem one from chevy for $8 and back to normal idle.

[@jonschwartz9669]

If you install a catch can you can reduce the oil vapor blowby keeping your intake cleaner ​@@DCBDesigns

[@DCBDesigns]

@@jonschwartz9669 thanks. reason was oreillys house brand pcv valve. i put in Oem one and idles back perfectly good. Thanks for the info

[@jonschwartz9669]

I purchased a JTL brand 200 bucks has a 3 ounce can and I catch one ounce every few thousand miles

[@Johnny_Bee]

Will that longer filter work for an 07 classic 4.8?……mine uses a PF48 not the PF46, GM changed the thread size at some point.

[@MattsShop]

It should work on a 2007 classic. I've used it on this 2006 4.8 classic for years. It's the same. If it threads on it'll work!

[@ricktaylor3748]

Yes, you can use an AC Delco PF61 or Mobile M205A filter, the Mobile is slightly larger in diameter, which makes it harder to put on. Always use Mobile 1 oil in your engine.

[@svbbs4390]

How much oil is between min to max on the dipstick here in Germany it’s about 1L so if you are on MIN mark we fill 1L in

[@MattsShop]

946mL so about 1L from min to max.

[@danielatilano9688]

Man I got a 2002 GMC Sierra it's been leaking oil since I got in 2020 I probably shouldn't just let it ride but I don't even know where to start with it!

[@emilenewton7372]

Awesome: Thanks

[@davidiverson4072]

I use Castrol GTX high mileage synthetic blend. Save a few bucks. But my 6th qt is always full synthetic! 6 qts everytime. No leaks on my garage floor or anywhere else that i see. Make my own syn blend percentage.

[@MattsShop]

Does the high milage help? I've been using it on some trucks.

[@davidiverson4072]

I think so. Truck has never failed an emissions test nor have I had any oil related problems. No ticking or oil pressure issues. Oil still looks ok on dipstick at 5k miles oil changes.

[@jeffreywhite7657]

Where are you? My newly aquired 05 may need you 😅

[@notavailable1027]

Great video 👍

[@MattsShop]

Thanks 👍

[@lifegoeson4085]

I use high mileage full synthetic oils, I started using it at 120.000 miles and no leaks, using regular oil leaks

[@Mikey-wf9py]

Oil cooler line on LQ4

[@MattsShop]

I know, I forgot the oil cooler block off plate.

[@robertmontalvo597]

In my 5.3 I always put 6 quarts of oil I do 5 quarts of 10W-40 and the last quarter I put is Lucas oil stabilizer been doing that all my life and my truck has 400,000 and it's cammed runs like a champ catch me on I-10 doing a 100-120 every weekend no problem

[@timothymccarthy8828]

Add a can of restore along with the lucas

[@djmezz2001]

Me too Lucas vital 300,000 on 01

[@v8stmpr]

400k ain't nothing for an ls based motor.

[@youtubechampion9377]

I've had many 500,000kms+ 6.0, 5.7, 6.2, 8.1 Absolutely amazing engines, I use mobile 1 full syn with a mobile 1 filter or wix. The mobile 1 full syn stays cleaner longer and definitely will clean up oil passages.

[@MattsShop]

@@youtubechampion9377Woah that's a lot of miles!

[@jamesrobbins8938]

Vortex is good..... I've had two...... never leaks anything.....5.3.....4.8....gmc ..and Chevy Silverado

[@HypocriticYT]

I’ve dumped so much $$ into a high mileage LS1 that looking back I would be better off to buy a crate engine 😮

[@1luxuryliner440]

Oh good to know

[@MattsShop]

Yea!!

[@1luxuryliner440]

Is it same on my 85 nissan 720 kingcab

[@MattsShop]

Same idea. General areas to check.

[@jaceallen4089]

What if my trucks got crazy high oil pressure

[@MattsShop]

The pressure sensor or the gauge is probably wrong/bad.

[@hotrod6919]

I've never really had an leaky ls. They have o-ringed gaskets. usually when they start pissing its from excessive crankcase pressure. Usually bad pcv valve or blow-by. You can add more crankcase ventilation that helps alot. But there's an old school racer trick I had to see it to believe it. Do a couple quick getto fog revs with some NOS that cold charge can some time's help revive tired ring's.

[@josedelao9925]

I have a 2004 Chevy silverado extended cab LS 4.8L when I try to pass I have my gas Pedal to the Floor and it doesn't pick up speed can you help and let know what I can fix thanks

[@levintaydebrownson4968]

Clean your throttle body and maf sensor

[@1luxuryliner440]

Oh helll ya mat how ya been man

[@MattsShop]

Hey, what's up?

[@FranciscoGomez-i3m]

I have a silverado 4.8 2006 is it bad to drive far with a main seal leak

[@MattsShop]

If it's not that bad it's fine.

[@damienhenderson9347]

But burning oil happen or not¿

[@robertescobar199]

I have a 99 silverado with a 5.3 vortec. Im having issues with what I think may be high oil pressure resulting in my filter and oil pan gaskets leaking. When truck idles it sits at 40 psi… then I start accelerating and it will pick up to about 60 psi, and if i floor it it goes up to 80 psi. I feel that that is high oil pressure and some components may need to be changed, can someone let me know if these oil pressure readings are high? Can someone share their oil pressure temps

[@jonschwartz9669]

Your pressure sensor or dash guage could be reading wrong .my silverado vortec cold start pressure is 44 at idol .hot idle is 20 but if your oil is clean and your filter is new and you have normal power and normal engine temperature I would think your sensor or guage is off

[@KingLugia2022]

What happens if you put about a quart too much oil in the engine?

[@andrewbeveridge3006]

Time paradox, the universe will implode

[@1luxuryliner440]

If you lived closer you would be my main person and i would pay like a slot machine

[@MattsShop]

Sounds great to me 🤣

[@brianlindsey38]

my gmc 5.7 vortec does not leak

[@arthurprice-ju7lj]

Each hole is 1 quart on 5.3

[@remopiccioni9456]

Mine has dimples instead of holes.

[@MattsShop]

Really? The ones I always see have holes.

[@remopiccioni9456]

2010 Chevy Silverado 1500.

[@warrenscott9990]

Biden has your gas tank on E too. 😅. I feel ya

[@MrNmnm2211]

2011 4.8. Over 120k not a single leak

[@victorjohnson7512]

That's how you know it's a Chevy.

[@lynskeyti9940]

Well it is Cracked Head Every Valve Rattles Oil Leaks Every Time

[@MattsShop]

Lol creative!

[@richardbennett887]

My 4.3 didn’t

[@MattsShop]

What oil did you use?

[@richardbennett887]

@@MattsShop Castrol 5w30 full synthetic

[@allensnook7760]

Avalanches there good looking trucks till they lose all those accent plastic pieces or start rusting then they just look like all the other rust buckets,sorry man not a fan,you can have them all!!!one mans beauty is anothers mans horror!!snooky pa😊😊

[@MattsShop]

I know what you mean. I haven't had any problems with the plastic pieces falling off. They don't look good once the plastic turns from black to gray.

[@waquezulfiqar9954]

What doesnt leak tell me that

[@MattsShop]

Hopefully nothing leaks.

[@HypocriticYT]

They don’t leak when empty and it’s the only way to stop all the leaks 😂

[@Eric-lq6yk]

Are these engines gas hogs and oil hogs?

[@retiredsnowbunnyhunterx5106]

But even the mighty toyota or honda can avoid this.

[@MattsShop]

I know right. It seems like they all leak!

[@leebuck180]

a 2020 Honda Ridgeline using Mobil 1 STAYS at full mark from 1 oil change to the next!

[@leebuck180]

a 2019 Passport with 47,000 miles and an unknown oil change history, I have only done 2 oil changes so will keep check on the oil level and see. yes, i also have a 2011 Chevy Silverado 2500HD that LOVES oil.

[@stillwill1808]

​@@leebuck180 Better stop overfilling then

[@stepheneggert9474]

Never go over 5.000 on a fully synthetic oil..

[@davidhicks9435]

Every ford engine leaks power

[@stevejohnson1397]

Bs no leaks 200000 miles

[@MattsShop]

Really? There's no way. Did you do a lot of towing/off-road at all?

[@Timmy.johnson]

Not my chevy

[@MattsShop]

Good!!

[@LyndenMcconnell]

Nerd!😂

[@chadrichardson411]

That truck don’t hold 6 quarts do you even know what your doing

[@MattsShop]

It does. Says it right in the manual.

[@chadrichardson411]

Nope your right boss

[@robertescobar199]

I have a 99 silverado with a 5.3 vortec. Im having issues with what I think may be high oil pressure resulting in my filter and oil pan gaskets leaking. When truck idles it sits at 40 psi… then I start accelerating and it will pick up to about 60 psi, and if i floor it it goes up to 80 psi. I feel that that is high oil pressure and some components may need to be changed, can someone let me know if these oil pressure readings are high? Can someone share their oil pressure temps