Searching for Torque - Header & Exhaust - FR-S Long Term #4 - Everyday Driver

The FRS/BRZ/86 has a notorious dip in torque, and we want to solve it. The guys at FT86SpeedFactory.com recommended their Un-Equal Length header and a more free-flowing V1 exhaust.
We take you along with us through the initial dyno session, the install, new dyno, and driving impressions.
If you need anything for these cars, contact our friends at:
www.ft86speedfa...
Use code "everyday" and receive a special discount for our audience.
And thanks to our friends at Integrated Engineering for helping with the install. If you're a VW fan... go here:
www.performance...
Long Term Part 1: Introducing our FRS
• 2013 Scion FR-S - Long...
Part 2: Tracking and Drifting
• Tracking & Drifting - ...
Part 3: RWD in Snowstorm
• RWD in a Snowstorm - A...
Part 4: Tuning 1 - Header & Exhaust
• Searching for Torque -...
Subscribe for a Videos on Thursdays!
Our "Car Debate" Audio Podcasts is every Tuesday here:
itunes.apple.c...
- Also on Stitcher or wherever you find Podcasts -
**If you'd like to help us do more films and go more places, become a Patron:
Patreon.com/EverydayDriver
Join us: Facebook.com/EverydayDriver
Follow us: Twitter.com/EverydayDriver

[@benfearn7961]

I've tuned 51 BRZ/FRS's locally. I use the openflash tunes and a Tactrix cable. Considering what you guys are doing, I think an openflash tablet would be right up your alley. The difference between the stock tune and the stage 2 uel header tune is unbelievable. Stage 2 brz will keep up with a 2015 wrx until 120 mph. But most of what I do for people is make their cars better for free. Besides the free tunes, the best mod for this car is the clutch mod. Remove the helper spring from the pedal and lower the pedal height. I'll get how to links for you. Make a video about it, everyone who owns these cars needs to do this

[@elk4331]

You ever do a video on this or can you recommend one? The clutch is too heavy for 200hp and not linear.

[@oneSMALLgarage]

I am interested on this as well 😁

[@kawasaki6215]

So, are you willing to send me a discounted or even free tune file?

[@classicbass3456]

For free? where do you live lol

[@notpinhead3514]

Im guessing the tune will completely destroy any mpg though compared to a stock wrx right?

[@TheAKBUDDHA1]

Boxer burble is back, WORTH EVERY PENNY.

[@bradleydowney5548]

LONG LIVE UEL

[@imVexedBruh]

"im just here to nit-pick" perfectly describes how your friends act everytime you have your car fully exposed up on a lift.

[@Mrboombastic936]

small bumps in power feel significant in this car because it only weighs 2700 lbs. don't be discouraged if you see smaller gains. having said that, the most significant "car feel" I experienced happened when I got light weight wheels and sticky compound tires. night and day driver feel, acceleration and of course, handling.

[@Brian-bv7ih]

The car is slow. My auto brz ran low to mid 16s. I added exhaust header and lightweight pullies and hardly anything better throttle response might run high 15s now

[@johnh6561]

Small drops in weight make a big difference too! A summer battery and single exhaust can drop 45 lbs.

[@johnh6561]

Not made for the drag strip. It's a drift car. I don't know anything about drifting with an auto.

[@B__L]

It's not a drift car. People need to stop calling it that.

[@patthonsirilim5739]

intake exhaust tuned shorai battery forged wheels stock options Brembo with braided steel lines ps4 Michelin recaro pole position both side cf hood and trunk bilstein b12 with eibach pro springs and sway bars cusco front rear and chassis struts 200 whp all motor 35hp up from stock 50 kilo down on weight glorious machine to drive

[@dachanist]

I just bought one, slightly lowered on wide summers with this exhaust. On the test drive I noticed feeling like I didn't have to ring it out like all the previous ones I've driven (used to sell cars). My reason for buying is the sweet spot of reliability, fun without cuffs, tasteful looks and price. These are very affordable now for a 5-6 yr old car with under 100k miles. Mine is under 40k miles. It's going to be my year round daily.

[@HeroRR]

Exhausts hardly ever make a big difference in terms of power. But they are still one of the easiest cheapest mods you can do to get a quick bump of 5-10 horse and it looks and sounds fantastic! Excellent car! Great video!

[@Nick-xx9wz]

@@michaelnadolski3007 oft tablet is 500 headers are around 1k, what other mod are you gonna do to add power that is cheaper? There’s none

[@ilpatongi]

@@Nick-xx9wz A tune is still cheaper, not that meaningfull on a NA car but still

[@Nick-xx9wz]

@@ilpatongi oft tablet is a tune..

[@ilpatongi]

@@Nick-xx9wz Didn't read that, I got "cat downpipe" for some reason

[@Rick8231]

You are correct with PEAK HP, its the cheapest easy mod for 5-10 HP. But if you look at the Dyno, specifically between 3900-4000 RPM, we see an increase from 110 to 129 Ftbs of Torque and in crease of HP from 81 to 98 or so HP. This is HUGE!!! I have a BRZ that is my daily driver. I commute 130 miles a day in it and most of it is at 75-80 MPH. With my 4.30 ring and pinion, my car is turning about 3700 RPM at an indicated 80MPH. For me, wanting to increase my top gear roll on @80, this pipe and header combo would be perfect. Unfortunately, FTSpeed is sold out of their V1 exhaust, so I may look at this header with a Perrin 2.5 or Tanabe Grand Touring and hopefully get similar gains.

[@miyawam]

You guys are one of the best KZbin car review sites. Beautiful visuals and great content. Keep up the good work!

[@TABRO284]

I have watched lots of videos on the GT86 and I am thinking very seriously about buying one. Your channel is by far and away the best. Lovely clean shots of the details, not too much talking, face time, or BS. I will be following your FRS series closely. I think the GT86 is my biggest candidate to buy because all of its close competitors are soft tops and I don't want to get a convertible or a turbo charged car. My ideal dream car would be a the Jaguar F-Type but I am not that rich :)

[@mwbutler82]

It's worth every cent. Especially if you live in the mountains.

[@Tryingmybestsince1999]

TABRAO Did you buy it?? Im saving up some money and im between buying a brz or a supra mk3.

[@thumpertorque_]

@@mwbutler82 Why mountains?

[@leorodriguez9923]

gt 86 is already definitely worth it stock, i cant wait to start modifying mine!

[@lilnips]

What about the torque dip, I don’t want to struggle uphill everyday

[@Nerdygamer000]

Now all thats left is the OFT Tablet Tune for UEL headers. Then presto, the perfect daily driver sports car

[@hothatchpa]

Great informative truthful review of this setup by the Everyday Driver guys. Considering one of the guys purchased the car and is doing these mods on his own personal vehicle, it really sinks in that this is a great platform to play with. Looking forward to open tablet! 👍🏼👍🏼

[@adamcykj]

watched many videos on these cars and this is still the best video for anyone looking for this kind of setup

[@mikers73]

Thank you for the episode. As a long time fan of the FR-S, GT86, BRZ, etc., it's nice to go straight to a video that points out the right mods for increased performance and proper noise.

[@Syniron]

You guys need this series in a playlist! Or am I just blind?

[@weaslepopper]

If I'm not mistaken,they are testing at a higher altitude,which always makes you lose hp. So wheel hp,and dyno at higher elevation is going to make hp decrease significantly.

[@Syniron]

No idea what you were replying to, but it definitely wasn't me!

[@weaslepopper]

+Peak Zero Gaming was replying to someone asking about stock up of this car. Don't know why it replied to you instead of where it was intended.

[@meeskee2]

I've got a Borla UEL header and a 2.5" Perrin CAT back (non resonated) with an Open Flash Tablet 93 octane stage 2 tune. It's amazing, I absolutely love it. It's how the BRZ should have been all along.

[@mikeyb9942]

How much did you pay for the Borla UEL header?

[@dan3510]

Long term review on your ride?!

[@TomEnduro]

Please don't go straight to Forced Induction..... Get a high flow sports CAT, good intake and get the ECU mapped at the same time...... There is still a lot more to come from that engine in NA form and that is where the character of the car is.... It's about handling, balance and engine response... Not ultimate power.. It needs a bit more, not a massive amount more!

[@bodhifyer]

08:50 oh my god that footage is beautiful

[@Angel-HC]

I recently added a Tomei unequal length header to my car to fix the dip. With just the off the shelf stage 2 OFT tune, it was immediately noticeable. So much more satisfying to rev out all the way. No more having to short shift at 3200 to avoid it, just nice linear power.

[@earlyapexprod]

You guys are hazardous to my bank account. :) Not only was this video informative, it's also the best demonstration of what the UEL sounds like that I've found on KZbin. Thanks! My BRZ has a Nameless axle-back and an Open Flash stock tune. With that alone the torque dip is almost gone. Even with the stock header the motor has more growl. I'll bet you lose the dip completely once you tune your FR-S. Thanks for posting this! I think my World Rally Blue BRZ needs a UEL so it sounds like a classic Subaru rally car. :)

[@Jorge_Magallon]

Really enjoyed Todd and Paul's characteristic thought provoking approach applied to tuning.

[@clarkescollectibles]

Honestly i love this car. The color and the sound just make it fantastic. Great video

[@blackericdenice]

When I was young, I had a 75 280z that made 170hp and had a top speed of 125 mph. I ran straight exhaust with a glass tip. My car still made 170 hp and still had a top speed of 125 mph. The only difference was it made a lot more noise.

[@Zygrene]

Nice video. If you decide to go forced induction, I recommend the Jackson Racing Supercharger kit from a pure performance perspective. I reviewed an FR-S with this setup on my channel and loved it. Still feels naturally aspirated but well over 50% more powerful when equipped with E85. Personally I'd leave it with 91/93 octane pump gas and dial in the suspension/tires/brakes. Then you'd have an incredibly balanced and quick car.

[@phillipberk5767]

Ayy just saw the one take on your nsx

[@Zygrene]

Phillip Berk Sweet! The One Take is definitely giving my channel the boost it needed.

[@Musicizmyremedy]

Zygrene very interested in getting that kit. As far as reliability goes would you recommend it if it's my daily for the summer?

[@KMA_KiCKz]

Their catted uel works great! I definitely felt the difference compared to the stock header.

[@GoProGF]

TJ, remember how cool it was that time we blew up Maxx Chewning's instagram picture and he joined the live stream... Damn times have changed.. Keep it up man #TJHuntArmy

[@ColdWindPhoenix84]

Found your channel while researching this car, and I love your Long Term Review. Looking forward to more videos all the time. Keep up the great work guys.

[@ericbishop6861]

I've been watching you guys a couple of years. In fact your cayman s review is one of the reasons that I bought mine. I've seen Miller Motorsports Park in a few videos but I never put it together you're from Salt Lake too. I've been on most of the local mountain roads around here don't recognize many of the ones your on. Anyway its cool as hell you guys are local. love the show!

[@matthewbonciu2444]

Guys! You are best in this branch if not THE best ones. Love your reviews because you are actually getting deep into those details that matter. Thank you!

[@tomc8854]

Hey guys ,Great job as usual. we seem to be going similar routes with our FRS's I have a DC sports catback and just yesterday I added the open flash Un-Equal length header and the open flash tablet. I do recommend the tablet. I'm new to this tuning stuff but it was super easy and open flash has awesome support . The car just seems to run smoother and breathe better like it just woke up! I wasn't sure if I was going to like the rumble but so far I love it . Very deep race car like sound. not at all like a Honda with a fart can! Also thinking about forced induction next probably super charger so I don't have to change the header . Leaning towards the Edelbrock looks like the best choice for an every day driver. But I will probably wait until the warranty is almost up.

[@Trendyflute]

Lord, why isn't the GT86 equipped this way stock??? Really mind-boggling...that sounds so great, and I had a friend in WA who did the same thing to his BRZ with a tune and he loved the results, claiming the torque dip eradicated and peak power up by nearly 40 HP. It would address the power complaints about the car at least somewhat, and helps eradicate that torque dip. Can it really be that much harder to have pass emissions or to get fuel economy numbers? The GT86 already gets amazing real world fuel economy! Sadly for Californians like myself, as long as this is aftermarket, it seems like it's still going to be awhile before such headers are available CARB legal...if ever.

[@MultiHeavyD]

I also live in Cali. Was thinking just to swap the stock ones back on for the Smog check😼

[@Shane-Singleton]

i'm a v8 guy. But I did own a 2002 WRX for a while and I say I do enjoy the exhaust note from that flat 4. I was really surprised to see such a dead zone in the torque numbers pre-swap. I'm looking forward to the eventual conclusion and remedy that you hint at with the forced induction. The reason that small NA cars worked in the past was because the 4-cylinders they had in them were really, really good for the most part. It just seems to me like this boxer engine only shines when you're pumping the air into it.

[@justdrive7317]

Let me just start off by saying I am a modification junkie, I could mod my WRX if my hair was on fire! So needless to say I really enjoyed your take on a mod video and look forward to many more. As far as the car goes, love it! What a beautiful sounding exhaust, sounds like a proper sports car and looks great to boot. Maybe I'm partial, but the flat fours take so well to modifications and sound great in the end. I am currently running a Nameless cat back with deletes and it's not nearly as overwhelming as I feared. On the other hand, I did just order a set of their 5" mufflers, so maybe I'm maturing ;). Great work and I'll keep an eye out for more. -JB

[@TheIamseth]

I loved this! i have a FR-S and i daily drive it. i daily drive the crap out of it, as I deliver pizzas in it. so watching this series has been awesome, thank ya.

[@AlexCesare]

I've got the Phantom ESC, and it took me around a year to get it secondhand from a friend. Reaching out to Rob will take forever, so you may hear back eventually! I'd suggest the OFT as it'll let you tune for E85, and whatever FI you end up going for down the line. Very useful for data logging too!

[@quintessenceSL]

Was in a similar boat. Didn't want to go turbo. Just wanted a little more. After speaking with some others who had already gone down this path, they recommended planning any upgrades my heart could desire from the onset- the effects tend to be cumulative, and it was a bit of a waste to spend money on something like cams (which I highly recommend) if the previous upgrades didn't also maximize the ROI. It also set a clear path of which upgrades to get and in which order.

[@Somerandom18]

Catted header... The cat is the largest factor in the torque dip and you keep it. Nice.

[@fatboy19831]

Awesome guys! This is the header I want. Please do not supercharge or turbocharge. Get as much power as you can N/A. There are 13.5 second cars that are N/A. This car at sea level should be doing around 180 hp. With a tune you should unlock another 10 hp. Please let me know if you get a check engine light.

[@DJMotoVlogs]

Guy I just have to say the rolling shots look absolutely beautiful and the exhaust sounds great too. Can't wait till you guys supercharge it. lol

[@mperez2496]

Exactly i own one and i had to get rid of that torque dip. I went completely catless on the uel headers and aftermarket highflow front pipe you should definitely give it a try on the pipe or remove secondary cat. Also did the open flash tablet on 93 octane and i must say its a whole different car. It feels alive

[@sunnyrogue27]

This just solidifies my need for an UEL header for my BRZ. Good video and impressions guys.

[@tigerbiterhater]

Like your videos. It's good you're driving everyday vehicle that anyone can get.

[@Flakey86]

The exhaust will mellow a bit over time as well. So it's good that it's a little on the loud side.

[@StockySnail]

Glad you guys finally swapped some of the parts out for better ones. If you decide your ft86 exhaust is too loud, I highly recommend the Invidia Q300 and it's what I run. It's the quietest one out there but still sounds deep and great. I'm glad you didn't get a hold of the phantom electronic supercharger guy. One of the guys around here had one and it's a waste of money. If money is a concern about getting forced induction, I would recommend buying one of the Innovate/Sprintex 210 supercharger kits with an intercooler. I bought mine used for almost half retail and have loved it for all 30k miles since I put it on. Low end torque is wonderful for daily driving with the kit (track/autox too) and it makes a cool whine noise. If I wasn't so far away in Oregon I'd let you drive my car and tell you all the good and bad stuff I've learned. Keep up the good work with the videos guys. Cheers. www.ft86club.com/forums/showthread.php?t=24596

[@amcezm0n3y47]

Idk id have to say the blitz NUR spec v2 is right up there. I am getting old i think. I purposely looked for a quite exhaust since the car came woth q clapped out dual muffler ebay special that woke up my wife and kids in the morning. Now it is only semi loud when given the beans. Otherwise close to stock sounding. And I have a motiv over pipe , fujitsubo dual resonators mid pipe too. Can't wait for my header to come

[@pro50joe]

Damn, that color looks fantastic and the roads you guys get to drive on are amazing.

[@hypnotoad2252]

Great channel - really enjoy your takes and reviews. As a BRZ owner needless to say I was really happy to see you pick up an 86. Mine is running a uel rwvworks header and the stage 2 tune from the OFT guys - I know you'll enjoy it if you decide to go that route. Keep up the good work guys!

[@renarudo1]

You have my like solely due to the new/old boxer rumble restored to this FRS.

[@johnh6561]

German cars are more work than fun to work on. The FRS is my first Japanese vehicle that wasn't a bike. I've had 3 Jettas (1 VR6), a GTi VR6 and an Audi S4 biturbo. This car is as easy to work on as my Wrangler TJ, if not easier. That says a shit-ton. It looks like a turbo is in my FR-S's future, but I need a torque fix fast. This exhaust, an intake, and Open Flash Tab should deliver the goods in the mean time.

[@jacobreed47]

show more videos like this. and not much about the Porsche please, not many of us can relate to such an expensive vehicle yet alone pay for upgrades like you can with the FT86. thanks guys, you rock.

[@jowowetan]

The sound is thrilling!

[@viru52000]

Phantom Supercharger has a pretty huge waiting list and I believe one guy making them. You'd have to wait for a used one (rare) or wait in line. I think you'll really enjoy the Openflash tablet as well, even stock it helps a lot, and if E85 is commonplace in your area, it'll help even more with the header/exhaust.

[@WarrMatster]

The sound is perfect.

[@mallratt25]

Sounds great and you guys always get me with those final shots. Beautiful.

[@crescentsunrise]

What I'm curious to know is--how does the FRS stack up now with the S2000 from your 3 way comparo a while back? Has the UEL and catback bridged the gap enough performance wise and emotionally to make up for the previous 40hp deficit? I'm also a Hot Lava owner, too ;) Keep up the great work. Love watching your videos.

[@kenshinmoriame3624]

nice upgrade bro, sounds nice, and the power band looks a lot better now also I really enjoy these modify/review videos so please keep making more

[@jqwill1987]

Good video, thank you guys for continuing to make videos that the average person can relate to.

[@charliederp329]

Great video as usual. Thanks for the update. Makes me want one more. Looking forward to the next one!

[@doctorscoot]

If you are going forced induction you absolutely have to have the Coyoda water-to-air intercooler turbo kit. it's got supercharger-like linear response. Plus it won't chew your accessory belt.

[@playlistajimenez5567]

I am happy with the stock accelerator pedal response compared to other petrol cars. Only minimal lag.

[@RHSTHUG]

I love you're guys' videos!!! Especially because you drive an 86:) please do an open flash tablet next. It's my next mod and I'd love to see a review from you guys on it

[@EverydayDriver]

You're in luck... Our next video on this car is a OFT tune and then a comparison with a Supercharged car. Glad to have you with us!

[@JamesPiquette]

Yup, very interested in the OFT review. Out of curiosity, are you reviewing OTS maps? Data logging? Dialing in the OTS tune with rom raider? either way this video helped me with my research for my BRZ. Thanks Everyday driver!

[@justingray760]

since when do you ever pass someone in 6th?

[@PressRandom]

It's much easiar with a turbocharged car. I can do it in my Civic Si 1.5T

[@nefariouscj9791]

Thank you. Thats what I was thinking also LOL

[@HandsomeAlex25]

I've been eyeing the FT86 speed factory header for some time, and after this review, I want it so much more. If only my other half wouldn't mind the extra volume...

[@FTspeed]

+HandsomeAlex25 Just installing our Catted UEL header on a stock exhaust will not make it much louder at all. It will sound very similar to stock. A cat back is what will make the big sound difference.

[@HandsomeAlex25]

Now if only I wasn't looking at buying a house...

[@elvisperez04]

actually thinking about buying one of these. I live in a small MN town so it'd be used in the winter but not for out of town trips. winter tires would obviously be another investment I'd make if I did buy an 86/Brz

[@brettrobinson7486]

That would explain the faux vtec i felt when my frs hit 4500 the other day... like it was going good, hit 3000 held back for a second and right around 4500 there was a subtle kick in the torque

[@recklesslyarrogant7242]

Well I'm sold. Visiting their website right now. Great video.

[@chandlermiller6033]

Excellent video, really enjoyed it, keep up the good work!

[@alankingchiu]

We need more of this.

[@oshkoshbjosh986]

sounds great! and awesome it did what it said on the tin--got rid of that torque dip!

[@zodiacfml]

I love the noise especially the low RPM rumble.

[@damiangarcia8679]

Great vid, looking forward to the next frs vid

[@theCycleReport]

I literally have a cattle header in my garage that's going on my FRS this weekend... After I replace yet another wheel stud of course.

[@bogackX5]

So I've got a BRZ and have seen countless builds in person. You really really need to tune for a header, typically more than 50% of the gains you see from a header are from the ECU tuning that should accompany the install. I'm about to install a catless UEL in a few weeks on my own personal car, I've just got to get it back from the shop currently applying a 2000*F thermal coating. You'll see far larger bumps in power from a catless header… but that comes with the downside of not having a primary cat anymore… Either way your technically not allowed to tamper with or remove OEM cat(s) anyway, unless they're proven to be ineffective: so why not make more power, right? If you're looking for a crisper shifting feel then grab a set of MTEC shift springs for like $30 and install them next time you change the transmission fluid. They're the best bang for your buck mod out there: makes shifting so much crisper, and quicker too. Pretty sure ft86speedfactory sells them, since you appear to have picked up a bit of sponsorship from them.

[@bullsfan2021]

never seen that kind of a dyno before, cool!

[@taaappp]

Exhaust definitely opened it up

[@SuperMaxCarp]

I could only imagine how much more fun the car would become with a proper tune to make the most out of the new manifold and catback

[@EverydayDriver]

The car was tuned and dyno’ed again 6 months later in a comparison with a supercharged FRs. Thanks for watching!

[@SuperMaxCarp]

@@EverydayDriver oh sweet!!! Thanks for the heads up...ill search for that video

[@bonestorm007]

ah finally, you guys are reviewing tuned cars! Nice review :)

[@kambo9o529]

Love your youtube videos and podcasts! I picked out an FRS just from your reviews and I'm waiting for that day when you guys can get your hands on the Phantom Electric Supercharger. Hopefully these guys are aware they need a professional review from the likes of you!

[@ThePavin]

A nice tune will help it make the most of what you've already got. The OFT might be a great versatile solution for you guys (e85, 91, etc tunes all built in)

[@thimble288]

It does sound cool now though; not a beautiful noise like an Alfa or something, but it sounds fun. Thanks to your video I experienced a strange disconnect between what I was seeing and the sound of the car. That sound does not fit that car, which is pretty cool in a way. On your FR-S track day video I commented something about how I wasn't such a fan of the trademark Subaru exhaust warble. The drive instructor in the video replied and schooled me on equal-length headers for the Subaru engine. The difference in sound is remarkable, and I prefer the change that the equal-length headers offer. According to the internet that reflash is the logical next step, looking forward to your test once that's done.

[@ez8308]

that exhaust sounds nice!

[@bobaab]

Great review, looking forward to the OFT video next!

[@TYAC_TPE_SF-Bay]

Press N/A to the limit. Don't go forced-induction, please.

[@Yarra_Shejtan]

Why? Do you own a forced inducted FRS?

[@doriangray2347]

I totally agree with you. Keep it NA and see what +hp +torque (both at same time) increases can be made. a +20 on either would be great. The 2017 has 5/5, and better gear ratio. I imagine a +20 on top of that would make the car kinda fast. I really dont want to go +$8000 dollar setups etc. Anyone could do that to a 1985 toyota tercel or pinto.

[@Yarra_Shejtan]

+Dorian Gray OK, i know this is just opinions and thats cool, but look at it this way. If I get a Domino's pizza home delivered and I like extra cheese, then i'll add more cheese. Its ok if you like the FRS/86 as is, its an awesome car stock. I drove mine for 2 years before i slapped on a Harrop supercharger and i now wish i'd driven it straight from the dealer to Harrop. "Anyone could do that to a 1985 toyota tercel or pinto" I dont know about you but i fell in love with the look of this car and its handling, the only thing missing was the "cheese"! ;)

[@doriangray2347]

haha. I understand. I can relate. I probably will want to boost it one day somehow, after I get mine this winter. I probably will only do it via exhaust, tune, maybe a cold air/ram air intake. I wonder about the direct injectors and how hard it is to make them gulp more gas. Reading up on it for a while. Interesting engine. N/A to me is always the challenge. How much weight does the super charger mod add to the car?

[@ToastyClam]

Dorian Gray Pinto would still lose on the track homie.

[@giantenemycrabX]

more videos like 10:33. That was so cool to watch

[@philipareias4358]

you guys have been hitting the gym, Good stuff :)))

[@MrSlowestD16]

Looks like a damn good mod. It's damn annoying that the BRZ comes gimped from the factory for emissions. Between that power dip and the tall ass gearing it feels useless to daily. I took one for a long test drive and felt it quite annoying. It felt about as powerful as the civic I used to have - which is unfortunate because the civic only had 127hp and this has a claimed 200 - but you'd never guess it.

[@mikehawk5466]

Love these long term reviews!

[@verygood7155]

I'd like to see what a Cobb ecu tune would do for your car. They're in your general area.

[@raviolitrail]

So header and tune is the way to go

[@BFIFE22G35]

Interested to see how the OFT does for you guys! I have a similar setup: JDL Catted UEL Header, and then Perrin 2.5" from the overpipe back. I'm considering the OFT so it will be awesome to see the results!

[@wvjon75]

Sounds good. Alittle loud but I like the low end burble!

[@SHiFTDI3S3L]

Wheels and tires are next. Because, let's face it, not a big fan of the stock rims. The JDM spec 16 inch alloys looked much better[yes, they came with smaller wheels in Japan, the 17's were an option]. Though forced induction is cliche, everyone's done it, it is your car. A small turbo should give you something satisfactory. For me, I would have gone exhaust/header, intake, wheels and tires, brake pads and fluid, maybe poly bushings, and maybe shocks. Why no forced induction? Because I like the reliability, and the car never came with it, and was never engineered for it. Still, it is your car. So if you want FI, that's what you're eventually going to get.

[@EverydayDriver]

+SHiFT Di3S3L (Patch) - If you watch our earlier Long Terms, (Like our "Tracking and Drifting" film) you'll see the upgraded wheels and tires. These are Todd's winter set. And though Paul is a big proponent of going FI, Todd isn't sure he wants to. We shall see. Thanks for watching!

[@SHiFTDI3S3L]

Oh yeah that's right, I forgot you already had wheels and tires. Yeah do your research on FI, specially ask about maintenance and custom modifications[cutting/grinding/routing], from people who have the FI mods, and how long they've had it that way. From what I have read and watched, nobody has anything good to say about long term FI mods to this platform. It all eventually became a pain to maintain, and they dumped the platform for a more reliable daily. I do enjoy watching your vids, specially your fast blasts.

[@eo5436]

Sounds awesome. Money well spent.

[@BChan1991]

that new exhaust sounds hella nice

[@Tryingmybestsince1999]

Great video. Love the way you talk by the way!!

[@ashermerkabah]

I don't know if further tuning is in the future for this car but I just wanted to say that I really enjoyed this episode and would love to see more if you ever decide to further upgrade the car. I'm seriously considering getting rid of my 99 Jeep Cherokee because I'm a car enthusiast and the last 3 years with my XJ Jeep has been killing me, its just not fun at all. After watching your last FRS video of driving in the snow, I might make the jump. I live in Wyoming now and will be moving to CO btw. Anyway, great video!

[@jdm3gee14]

I wonder if I put the heat shields back on to the header if I can get away with smog in CA

[@JoshuaTootell]

Last few times I had a car smogged, the guy just inspected the engine and checked for codes. I don't see why he would actually look at the header.

[@BBoyGi0]

Frs,gt86 is ad as a 200hp factory. Of course it's not supercharged which is fine. It gives you the endless options to modify to your own specifications.

[@snoopdogg416]

Would love to see a comparison against the automatic version. Especially how they compare on the track. I've heard the auto gearbox shifts are pretty quick in sport mode and in manual mode. Don't know if you guys can get your hands on an auto but would love to see a comparison video!!

[@kev60625]

You guys need a custom tune to really take advantage of these new mods! The frontpipe is also a piece that should be replaced.

[@stephanematis]

I would have just done the unequal, but I like a more stealthy setup. I'll echo the others, you essentially should OpenFlash or custom tune this setup, as the dip can also be helped via software.

[@VanDyce]

+stephane matis equal length headers are better, unequal causes ring land failure..

[@stephanematis]

OfficialVanDyce I was under the impression that ringland issues, like in cylinder 4, are more of a EJ25 Turbo problem. Can you share source for the FA engine issue?

[@VanDyce]

stephane matis i don't know exactly but suburu is notorious for their rumbling 4 cylinder because of the unequal length headers but the ring land fails a lot, unequal length headers are for engines that are position from side to side, and equal length headers are for engines that sit straight.. other than that i havent heard many engine issues from the FA, some people get blown motors and some havent.. i feel the ones that havent just dont report it haha

[@stephanematis]

OfficialVanDyce I hear you. I personally know a few STI with issues, but so far, I have not heard of a non-blown FA, Turbo or Supercharger, having issues. Time will tell. Being a Subaru guy, I do like the rumble and extra torque.

[@VanDyce]

stephane matis eh the unequal will probably run 1 - 2 more horsepower than the equal so not really that much of a difference, id rather have equal because of ring land failures on the unequals

[@NoahBB]

I know you don't want to, but please. Just a little supercharger!!

[@freezor80]

Sounds pretty good from the behind audio. Not much louder seeming from inside. But it is louder.