ADJUSTING VALVE LASH ON MY 6.7 CUMMINS!! || NO MORE CHATTER!!!

[@SJJsolomonSJJ]

“Got y’all sitting on top of the compounds, so y’all should be excited” 🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣

[@EVERYTHANGDIESEL]

Lmaooo🤷🏾‍♂️🤣🤣🤣

[@Juan4themoney]

I'm sitting here watching this with 427k never having done valve adjustment, I probably should.

[@manny1782]

Same here 😂. 260 k nothing but oil change and fuel filters 🤙🏼

[@09mrdennis]

Same here 334k 21 ram 3500😮

[@noelhand6826]

@@09mrdennisgood lord that’s a lot of driving

[@PremiumFuelOnly]

@@09mrdennis 2019 and up are hydraulic rollers lifters. There is no adjustment.

[@vivodelabasuraquetiranenusa]

Same here! 2003 5.9 with 346k just replaced the crankcase filter!!!

[@mikestrucks]

She runs nice ! The right valve lash makes the engine run much better 👌🏻

[@EVERYTHANGDIESEL]

Big facts man! I agree

[@matthewl6183]

You should be proud that you took some initiative to do a job like this, most people wouldnt even attempt job like this on a diesel; props👍👍

[@EVERYTHANGDIESEL]

I mean if u can work on helicopters I feel working on this isn't bad

[@kenle3419]

Hi, my dealer suggested I get the valve backlash adjustment performed on my 21 Ram Diesel with 28K miles, along with the 30K service. Is this (extreme) cost really needed? Any help would be appreciated. Thank you!

[@craigthompson455]

It’s crazy to think these loosen up versus tighten. As a power sports tech I have never had to tighten a valve to spec (that a customer hadn’t screwed up trying to do first). I always have to increase the clearance to off set valve wear.

[@white24valve]

My trick/secret is...intake .07 exhaust .017....the turbo will come in approx 200 rpm soon!! Your welcome!! Done this on all of my 5.9's and 6.7's....

[@david-or5cs]

Don't feel bad, I bought mine with. 142,000 miles on it, I just now adjusted the valves with 263,000 miles on it, oops 😬

[@common-railcody6490]

Is it me or does your belt not sit right on your water pump pulley? 2:40 in your video

[@vendetta1306]

Somethings gotta have a bad bearing or something, don't those belts adjust themselves if off a little?

[@EVERYTHANGDIESEL]

The tensioner was bad.

[@josephdettmer6575]

Didn’t even know it was a thing, lol. I’m not tearing you up! Lol. My 18 has 137k on it and I didn’t even know it was something that needs done. No one ever mentioned it nor dies the manual or the maintenance manuals.

[@cadilakisrodcustom]

I just ran the valves on my 08 a few weeks ago, I have 153k on it.

[@zhongxina5595]

I don’t have a Cummins but I still watched for the future

[@EVERYTHANGDIESEL]

Good to know how to do

[@clockworkbike]

Nice video. I want a see-through rocker cover!

[@badkarma2369]

I enjoy all your videos bud, you’ve helped me out a few times!!

[@drewreynolds5739]

Is your serpentine belt off track? When you should tdc early in the video?? I had one break before sucked hahha great vid man!!

[@mattfluegel4940]

How do you rotate the crank shaft 360 degrees?

[@Bonno460xvr]

I have only done my lash once and I have 374k miles on mine.

[@martyrosalyn]

Good video brother. Looks like your belt is about to come off the waterpump pulley!!!

[@MKSPerformanceOffroad]

Great video, just did this with the headstud install. These specs are also what alot of industrial 6.7 cummins are set at as well

[@EVERYTHANGDIESEL]

Yessir .026 exh is if u got a emission intact 6.7 but definitely runs better at 20 thousandth

[@zorans5200]

Oh man, saying that you never done your valve lashing on your truck with that many klicks is cringe worthy lol.. I fix these engines all day every day.. but when you adjust your valve lashing perfectly the engine will perform much nicer and burn fuel much better. Great job on the video man!

[@EVERYTHANGDIESEL]

I can agree that the engine idles and runs smoother for sure! Well past due but she good now. Thanks man!

[@zorans5200]

@@EVERYTHANGDIESEL you bet brother!

[@joeyamador7961]

T-handle with hex handle makes it way easier.. on the rear ones use handle side of allen and I barely loosen the jamb nut to adjust so there is a slight amount of tension since the adjustment screw is so sensitive. #isthattorquedtospec? Lol. Love your videos brother! 6.7 life

[@vanbraxton8422]

My brother, when u make your videos, make sure you know all the right names of tool & the sizes ( allen wrech size) & 10,000 feeler guage , make sure u focus camera on proper size, ok thank you😊

[@geraldkoth654]

Every single valve lash adjustment video starts with the valve cover off. How about starting from zero disassembly?

[@EVERYTHANGDIESEL]

If u cant figure out how take a valve cover off you don't need to be adjusting valve lash on your truck period. 😂

[@SOHN32]

Oh by the way Thanks for info and help. It help me on my Adventures. And get future ideas for stuff I like too change. Hopefully I can share them like I've tried too do on my channel so far.

[@bangbang-ul6wv]

pretty sure if its deleted you dont adjust to 6.7 and adjust to 5.9 specs as its tighter and helps alot

[@EVERYTHANGDIESEL]

Yes going to 10/20 thousandth is nice for these engines.

[@dougstadel9310]

Good Job Marine

[@jonhamm6363]

Awesome video. Quick question what torque spec did you use for the lock nut? Dodge says 18 foot pounds. Cummins says 212 foot pounds.

[@threadedkey4941]

It’s 18. Definitely don’t torque em to 212 😂

[@willgarrick871]

212 in lbs , 212 \ 12 = 17.66…

[@billgates5201]

Please find a 5.9 and do a tutorial on valve lash!!

[@95F350]

Excat same procedure. No difference

[@EVERYTHANGDIESEL]

That is correct its the same.

[@domingogarcia2873]

My truck has 380,000 miles as far as Ik my father has never done any valve adjustment on the truck, it well not pull a trailer how it’s supposed to acts like it has no power. Well this help at all ?

[@EVERYTHANGDIESEL]

It could potentially. I would do valve lash

[@longbar2344]

the angled feeler gauges are nicer to use

[@jonschryver9986]

What’s your turbo setup?

[@joey8567]

Then my Mrs won't know I'm home a dinner won't be out after moving cattle all day!😂

[@SOHN32]

Ya torque on vavle nut is 212 in lbs. Did you do .010 on intake and .020 on exhaust . Or you do .020 across the board. I went back and watched again you did do .010 on intake and .020 on the exhaust. Look into getting a vavle nut wrench add too tools. It will help make stuff a little bit easier.

[@EVERYTHANGDIESEL]

Yea I did .010/0.20 intake exhaust and I just used a socket to break em needed a can of man. Yes I torqued them to 212in lbs

[@julianmeneses3094]

My mans coming in clutch with the how to video again

[@EVERYTHANGDIESEL]

😎🔥💪🏽

[@Jolley86]

Watch out for that belt my friend.

[@oldcroneysgarage9739]

I'm looking at buying my dad's 2000 dodge ram 3500 with a 5.9 24 valve. I was thinking about ajusting the valves on it if I get it. Good video

[@EVERYTHANGDIESEL]

Thank u man, same process as this truck

[@Suikakuji]

But you just changed injectors and changed your springs...?? You've already set valve lash or at least we would hope.

[@EVERYTHANGDIESEL]

I didnt set valve lash when I did the injectors & springs. U don't have to set valve lash its just recommended to check it after removing them

[@filabila]

Never done mine either and im just past 250,000 miles

[@SJJsolomonSJJ]

Me neither boss, and I’m sitting at 285,518😳 Waiting to go home on leave now to tighten them bab boys up, ASAP!!!

[@harleyhoracio1]

I’m at 208k and never done them either. I don’t have a lot of chatter but they prob should be done.

[@harleyhoracio1]

Was at the Cummins dealer and inquired about the price to have them do it (just for shets and giggles) they wanted $700. 😳

[@EVERYTHANGDIESEL]

This is why I make youtube videos lol

[@EVERYTHANGDIESEL]

If u tighten em up you will be happy man

[@bobevans6590]

The highlight of the video “ wow never ran it with out the cover! “ gotta say I was expecting oil to fly up there. How does the valve tops get oiled?

[@urgentcaretruckrepair9410]

There's holes in the rocker stand that oils the rockers

[@EVERYTHANGDIESEL]

This is true from what Bobby said.

[@noahpeterson7108]

Hell yea bro just in time I'm doing that this weekend

[@EVERYTHANGDIESEL]

Hell yea man it helps if it hasn't been done a while

[@SOHN32]

If you didn't adjust when you replaced vavles springs or head studs what did you do too set adjustments.

[@shearerperformance4016]

That's what I was thinking too

[@EVERYTHANGDIESEL]

Nothing just put them back on, u don't have to adjust the lash, its recommended to check them.

[@thomasfortenberry949]

Very great video! Love your content man!

[@badkarma2369]

I love all your videos bro

[@nurudeenharuna4945]

My 6.7 make a bad sound why please

[@tallgeeseheavy5311]

i remember the first video i watched from u. coolant change, lucas. i always hit that like. BEAT MY BURNNOUT

[@tallgeeseheavy5311]

I been doing valve lash on civics back in the day

[@EVERYTHANGDIESEL]

I appreciate it bro!

[@surf969]

looks like the first time working with tools lol

[@Tazyz]

bro where are you located

[@pineappleIII]

Good video bro, there aren't many on here for adjusting valves. I just did mine at 170,000, the 6.7 runs a lot quieter at .010" and .020". How are you liking the injectors? I want to do some bbi stage .75 soon, they're around 45% over, I think close to what you got

[@EVERYTHANGDIESEL]

Thanks man and I'm loving the injectors! They run awesome great power at 50%

[@kevinboisclair2866]

What do you have all done to this?

[@markgentile2674]

Nice job.

[@bradleewitt4048]

Aren’t you supposed to lock tite them after setting them??

[@EVERYTHANGDIESEL]

The valves? Hell naw nothing gets loctite internally on these engines

[@rywerxgarage107]

nice i need to adjust mine as well.

[@EVERYTHANGDIESEL]

Easy job

[@pggrasshopper]

Need you to come do mine

[@WhattHappens]

How often does this need done?

[@EVERYTHANGDIESEL]

I believe every 80k or 70k I don't remember

[@kennyb1451]

Great job brother👍

[@EVERYTHANGDIESEL]

Thank u my friend!

[@noHandle1776]

Damn, I was way off by 118k! Haha

[@HammerHead524]

did you not just do this when you did injectors???

[@EVERYTHANGDIESEL]

Naw I didnt

[@diablocell]

Is this only to reduce chatter noise or does it help with efficiency too or whatnot

[@EVERYTHANGDIESEL]

Your valve train helps with how your engine exhaust and takes in intake. Basically yes it does play a roll in how it runs

[@CarlosGonzalez-yq4tr]

Push that thumb 👍🏼

[@mauryanderson7158]

alright!

[@reginaldceasar433]

Great video bro

[@EVERYTHANGDIESEL]

Thank u my friend!

[@santosrivera3473]

I like it

[@Balakay9435]

Hell Yeah Brother

[@jwshoptime.jeeprepairpleas8552]

Great info nice video

[@EVERYTHANGDIESEL]

Thank u

[@dougstadel9310]

Is the valve cover Reusable

[@EVERYTHANGDIESEL]

Yessir

[@dougstadel9310]

@@EVERYTHANGDIESEL thanks

[@vintagetrk]

Semper Fi

[@TheProchargedmopar]

👍

[@gunz_n_bikes171]

You do know diesel mechanics know this right??

[@EVERYTHANGDIESEL]

Omg i had no idea!?!? Are you serious??.....😐

[@gunz_n_bikes171]

@@EVERYTHANGDIESEL as in if you dont know what youre doing you PROBABLY SHOULDNT DO IT besides if you got chatter under them valve covers its more likely a tappet if you think its youre lash youre walking on a dream yea itll get you by but youll have some fucked up wear on the cam, tappets and rocker arms

[@DS-TRUCKS]

Time to get a Power Stroke.

[@RMYD002]

Lmao yeah...no

[@DS-TRUCKS]

A 6.7 tho?

[@reginaldceasar433]

🤣🤣🤣🤣 if he's smart he wouldn't

[@DS-TRUCKS]

@Hayden Koehn lol.

[@oldcroneysgarage9739]

But I don't wanna powerstroke........

[@Cjsairgunscarsandmachining]

Dude every video I've seen of you with these diesel trucks you have multiple minutes of ridiculous nonsense at the beginning can you just get what the video is about?

[@EVERYTHANGDIESEL]

Yet here you are 🤔

[@Cjsairgunscarsandmachining]

@@EVERYTHANGDIESEL lol, fast forward. And nothing personal, lots of good information, but lots of completely irrelevant information before you get to it

[@EVERYTHANGDIESEL]

This is my channel kid, I film and talk about w.e I want to, if u don't like it, it's simple don't watch lol not gonna change my videos and how I want to film because of a impatient person sorry.

[@Cjsairgunscarsandmachining]

All good, like I said, nothing personal. And not about impatience. It’s about all people like you talking for longer about their own BS that 95% of viewers don’t care about, than the intended content because they think they’re super stars because they post videos on KZbin for less than 100k per year. So sad.

[@EVERYTHANGDIESEL]

😂😂 I feel u lmfao