EVGA 3080ti FTW3 thermal pad replacement

Replacing thermal pads and paste.
Kritical 2.5mm pads: Kritical Thermal Pads - Extreme Conductivity (20 W/mK) - Designed specifically for GPU, CPU and Other microelectronic (2.5 mm) a.co/d/f59B4rO
Gelid 1mm pads: Gelid Solutions Ultimate GP-Ultimate-Thermal Pad 120x120x1.0mm. Excellent Heat Conduction, Ideal Gap Filler. Easy Installation Thermal Conductivity 15W a.co/d/bgLPLL1
Thermal Grizzly Kryonaut thermal paste: Thermal Grizzly Kryonaut The High Performance Thermal Paste for Cooling All Processors, Graphics Cards and Heat Sinks in Computers and Consoles (5,55 Gram /1,5 ml) a.co/d/7Eah1Xi

[@davidbonafe2328]

Hola como estas ? Muy buen video, q medidas usaste exactamente para todo ? Y como fueron los resultados finales mejoró ?

[@pcgamerargentina6932]

Tengo la ftw3 pero hydro copper, preguntale en ingles

[@Virtuegaming13]

All the sizes are in the video description. VRAM thermals before were sitting around 95-100c after it never went over 90c on full load vram overclocked. Chip temps went down 4-5c overall.

[@uk4890]

What about the GPU temps? Thanks

[@MrOliatko]

thats very bad temps u have to upgrade your airflow

[@Virtuegaming13]

@@MrOliatko this was overclocked VRAM while mining ETH.

[@Virtuegaming13]

@@uk4890 the thermal pads wont help with chip temps, however the thermal grizzly extreme paste is amazing. even to this day the temps are staying around 68c while under full load.

[@uk4890]

@@Virtuegaming13 I know I'm not a beginner. I'm asking because I saw that you changed the thermal paste. I use Thermal grizzly extreme is the absolute best TIM for CPU or GPU!!

[@kris2501100]

I cant seperate my card from cooler . Everything glued so well together :(

[@Virtuegaming13]

0:53 I don’t think you can see it very well in the video. When I’m pulling the cooler and the board I’m also giving it a little twist (like an Oreo cookie). Slow and steady.

[@Virtuegaming13]

RIP EVGA graphics cards =(

[@isaacpargas5158]

2.5mm for the vram chips is way to thick, thickest id go is 2.25mm not 2.5

[@lolepicfailhaha]

2.25 is reference for these cards so a soft 2.5 works well