EVGA RTX 2080Ti FTW3 Ultra | DISASSEMBLY/TEARDOWN | How To Change Fan and Repaste -TakeThatScrewOut

[@lavendy]

It was organized very carefully, beautifully, easily to see and understand. I felt that this movie was the best example to use as a reference when disassembling and cleaning :)

[@TakeThatScrewOut]

Thanks a lot! Be safe!

[@alexslaydon2426]

Great video! Those fan headers are a pain to work with. I'll be replacing my thermal pads soon and will use this as a guide to make sure I don't mess anything up along the way.

[@mutlubasdas]

Makes me appreciate how nicely the 30 series card are built. Simple, not over-engineered like these guys :) Such a process geeeeez :)))

[@TakeThatScrewOut]

Thanks for the positive comments..be safe!

[@redclaw72666]

Makes me appreciate the 20 series cards are built better thermals vs 30 series 🤡🤡🤡

[@dustinf1896]

I saw you replaced the thermal putty on the inductors with a thermal pad. What thickness pad did you use? 1.5mm?

[@TakeThatScrewOut]

Its 1.5mm i've used..

[@onnuleulhimnaeja]

All pads 1.5mm??

[@TakeThatScrewOut]

That's right, Thermal pads used on this card are all 1.5mm

[@TheJuantech52]

Thank you for your hard work I follow all these steps and my GPU went from 75 to 57

[@shiftctrlhack]

Did you use all 1.5mm? His link is for the 1mm pads so I'm curious to see if there were different sizes.

[@ArtFiendz]

Do I have to do all this to change a fan? Or is the stock thermal pad and thermal putty fine?? And then obviously I at least need thermal paste for the chip

[@mattp7437]

Hi, Whats the difference between gray and blue thermal pads? Whats the thickness? And which brand thermal pads could You recommend? Thank You!

[@TakeThatScrewOut]

The color is nothing to do with performance..what i normally used for Thermal Pads is ARCTIC brand..and there's Thermal Grizzly Carbon ( For CPU inly), Thermal Right pads. And with it comes to Thermal paste, Arctic Silver 5 or MX lineup, Noctua, thermal Grizzly & Corsair is what i recommend.

[@MichelPingui]

Hey, all pads 1.5mm?

[@TheJuantech52]

Excellent video

[@AK-qo6tx]

My EVGA RTX2070 card's RGB lights went out and now the 2 fans stopped working. The card is still able to display and do light work like surf the web, watch youtube and some light gaming that doesn't need the fans activating. When the RGB went out it caused a burnt plastic smell....fans kept working for a couple of days afterwards. I wonder if there is any way to get the fans to work again? Seems like a waste since the card still works except for fans not working.

[@christiancox2596]

You forgot the thermal pad on the left side memory chips.

[@TakeThatScrewOut]

The stock pad was still very good, so i didn't bother to replace it with a new one..still there attached to the heatsink..😀

[@jonathanfitz-calitri8463]

I noticed that as well

[@redclaw72666]

@@TakeThatScrewOut there was nothing attached lol look at the video there's no thermal pad on the left side 🤡 it's just a bare plate only

[@shiftctrlhack]

@@TakeThatScrewOut ahh ok I was wondering since there are different sizes but you only showed 1.5mm. thanks for the clarification. If anyone knows the other sizes please post.

[@nick_burns]

Any recommendations as to where to buy? Is the blue pad 1mm thick?

[@TakeThatScrewOut]

Ebay or Amazon..that depends on ur location..if not try google

[@TakeThatScrewOut]

2mm but 1.5mm would do perfectly

[@yoadknux]

So nice and clean. I don't like those Arctic pads though, way too rough imo, and break/powder

[@TakeThatScrewOut]

Thanks bro!

[@joshyjosh00]

how many sheets of Thermal pads do you think you needed ? will a 100x100 do or should i get a 200x100?

[@TakeThatScrewOut]

200x100 probably enough

[@Mianarose.ayaggg]

Awesome! 😍

[@marcolo5086]

Hi there. Would like to know what is that blue double sided tape you used? Can I use the the grey thermal pad instead? Thanks!

[@TakeThatScrewOut]

Thats a Blue color Thermal Pads..

[@marcolo5086]

Thanks! I bought some 1.5mm thermal pad and realised the stock thermal pad is much thicker than 1.5mm. Could you please tell me which thickness should I get and how many do I need? Thanks!

[@TakeThatScrewOut]

@@marcolo5086 the stock is 2mm, but 1.5mm just fine..the more u can afford the better..u can use them in future anyway

[@marcolo5086]

Thank you so much! I just changed the thermal pads. I used 2mm thermalright 12.8 W/mK thermal pad for the vram. Temperature of the vram is now 100C instead of 80c (before replacement). What's the problem here? Would you be able to help me out? Thanks!

[@dano5238]

@@marcolo5086 did you get this sorted out?

[@RaycC303]

i have this exact card but it only has 2 fans...they are starting to become louder during gaming and im considering a fan replacement and tp re application...this was so informative....thanks!

[@TakeThatScrewOut]

Some cooling fan issues when gets noisy and louds are bearing issues..in that case you should replace the fans

[@SoupeDeSup]

After how many years should we replace those pad and thermal pads? I have ly 2080ti since end 2018. Peace

[@TakeThatScrewOut]

That depends.. after one or two years..if you think your cards started to throttle..try get a high quality pad and replace it.

[@SoupeDeSup]

@@TakeThatScrewOut alright i will do it now. I found some good pad from ARTIC brand.😀 thanks

[@TakeThatScrewOut]

@@SoupeDeSup goodluck bruh!

[@SoupeDeSup]

@@TakeThatScrewOut alright i just did it and you know what ? i almost won 15 degree in idle (from 42 to 27C) and in game i m now at 57C (before 71C). My memory temps also dropped for about 25C. It was worth doing the repaste. THANKS MAN !

[@TakeThatScrewOut]

@@SoupeDeSup you're welcome bruh..enjoy!