Scrap Marathon Biggest Ever Part 5

[@OrangeJeep852]

He is in the garage! Yay!!

[@stephenjohnson1911]

Brilliant again Ben, looking forward to part 6. Keep them coming the longer the better

[@altafrahman2254]

Disappointed not to see your Yard run with Steel scrap. You did it off camera. I always liked yard run part in your videos. I request you not to miss even a minor visit to yard or recycling center. I like your commentary about price fluctuations and other small titbits. I hope in Part 6, you will show yard run.

[@sun2sand2snow]

Congratulations on getting back in the shop. I hope you are enjoying your accomplishments, that was a lot of work. Thanks for the video.

[@michaelschuenemann3505]

We made 3 Cups of Coffee during the Stripping - wow - that was soooo Great and You have now a little more Room in Your Yard and Garage - well You had Your Chicken Helpers as well - Great Video - we Love it and keep Safe and Cheers from us here in Loganholme in QLD !!!!

[@patdeal8664]

Lots of fun.

[@scrapitaus]

Woohoo! we can see past the door!! I've been waiting 6 days!

[@markb4805]

GOOD LUCK

[@josephonesta6416]

I hope I live long enough to see you actually recover the gold.

[@stevew.7188]

Lol he had a barrel full of CPUs that he forgot about. He's gonna get pounds of gold someday.

[@keytefirerefining1355]

Its not that hard either

[@keytefirerefining1355]

@TheWizard22UK lol

[@paulsmith927]

Don't think that ever going to happen.been waiting two years now and haven't seen a milligram of gold processed 👍♻

[@keytefirerefining1355]

@@paulsmith927 yeah don't think he has interest in that anymore

[@richardburgess5215]

Happy Sunday Ben ! Good job mate .

[@shaneyork300]

Loved the depopulating of the boards!! I'm not a newbie but I still love that stuff!! Hope you show some of your full hoard of Gold Recovery Items, like gold band crystal oscillators or anything gold recovery!! Have a GREAT Day My Friend!!!

[@markb4805]

Good luck with the scrap

[@Maccoye]

Thubs up the second I see the door :D And yeeeeeaaaaaaaahhhhhhhhh another marathon ! stay safe and thx for sharing

[@poosmate]

Great video as usual. So glad to see you making such good progress on your goods and making some space for future pick ups. This virus has been a kind of blessing for you, and no doubt there's not too many of us who can claim that. I've been working from home since April 1st and have saved a (not so) small fortune in traveling expenses. Take care, Poo

[@LazieJane]

Must be a good fee!ing to be getting on top of it. When you get busy again you will be grateful for this .

[@joepowell5956]

I almost couldn't wait for scrap part 5. I love your videos. Keep um coming

[@davidfreise3531]

WOW! Really good video! Covered ALLOT of stuff and good tips. If i could give you more likes i would. I'm in mid america and the yards here with the exception of one do not even pay for e-waste. And the one yard gives only 15 cents flat regardless of if the board is a motherboard or a powerboard. So i pick it all. I've been following you for about two years now. I started when you were doing 'coppah' ingots. Thank you!

[@escrapchannel]

Another great video 👍

[@jxavier3876]

Hey Ben, as a beginner scrapper I would like to see a video detailing how to spot gold bearing chips and stuff on boards, I’m still not quite sure which is a bga memory IC, eprom, and what it all means. Lol good video.

[@mikespatola4242]

Hello Ben I am 39 years old maybe I have stertad to late but I follow your format of stacking and saving and processing I think its brilliant . thanks for your wisdom and knowledge and I live in Canada and in my city there are scrappers but next to no ewaste scappers

[@mikespatola4242]

And there is no place to sell ewaste and the scrap yard isn't to savvy to it so what would u suggest

[@michaelbrumfitt]

👍great video you’re getting there,I enjoyed the sever scrap this time as must as I did the first time👍

[@bigredbullion3883]

Awsome .... i love these marathons

[@garywalker3818]

good blog mate keep them coming good to see gary from crewe England

[@Davidalfredcarter]

Great vid, very informative. Great to see how its all clearing up, and how all that stock is now giving you a reward. Cant wait to see the little pockets or piles of pcs and switches all disappear. Great job...keep safe

[@Babbel4ever]

Thanx you. Very nice to see. Greetings from the Netherlands

[@markb4805]

REALLY GOOD FOR SCRAPING

[@paulsmith927]

Wow finally got to open the mystery door 👍♻️

[@Michael-db1ce]

I love it, like watching a big harvest.

[@michaelbrumfitt]

👍great use of an old bed frame👍

[@dropedlow33]

THE RAM THERE CALLED HEAT SPREEDS

[@gabrielmaligeorges6996]

Progress is good - well done!

[@toomaskotkas4467]

That was truly awesome video, Ben. I enjoyed watching the different parts of ewaste business and your insights.

[@jxavier3876]

What’s the meaning behi nd that pfp?

[@toomaskotkas4467]

@@jxavier3876 What's "pfp"?

[@jxavier3876]

Alan Shore sorry, profile picture

[@toomaskotkas4467]

@@jxavier3876 "No Nazis"

[@jxavier3876]

Alan Shore why Ukraine tho

[@stephenstebbing9460]

Was that an IBM 8086 PC motherboard? Don't see many of those these days.

[@barrywest3758]

Loved the Chooks Ben! Happy to see you can turn this ram into some quick bucks,! Really enjoyed and thanks! 👍👍

[@emmasigler2470]

Thanks Ben ❤️❤️❤️🌺🌺

[@markb4805]

It's Good to see if you can scrap the metal

[@nelsonroy5065]

If it is raining, it is not that cold. Canadians know.

[@jonesmetsasta226]

When are you going to do metal recovery vids? I'd like to know the best way to do gold, silver, platinum, and palladium recoverys. I know you self ain't going to do that yet, but i know that you know the best way to do those things. Many people is waiting that you open that Pandora's box. How cold is "cold weather" in Australia?

[@Wreck-Gar]

Hey Ben, when I first started to watch your videos I was one of those that thought oh my god, he could sell that for $$$$$ but after watching tons of your videos now, I understand the market over there and the logistics of getting the big stuff out to people. Plus I already know what a nightmare ebay can be 😫 Thanks for explaining it to us 🙂👍

[@markb4805]

It's Good to see scrap

[@mastercrafter2980]

Rip Dell poweredge r910 ill miss you

[@philais]

Whoohoo!!!! Scrapping!!!!! It is hot here in San Antonio Texas USA!

[@patdeal8664]

Thank you for the videos.

[@rexwilkie5]

Just putting it out there but is ur depopulation station past ur wifi range?? Or is it on the edge of your wifi range and under roofing iron

[@Nitrodus]

I am always so excited to see your notification from yt, that u will educate us on scrapping even more, then u had.

[@Firejoker54]

Sweet, part 5! Thanks Ben

[@npolite22]

How are the mid grade boards still good if you break off the gold fingers?

[@jxavier3876]

1:36:47 wrong type of fingers to scrap! Lol😂

[@Pakks22]

Hello from Indiana USA, watching you remove the fingers from the boards had me thinking, have you thought about using a sheet metal hand seamer to remove them? It looks like it would be more efficient and easier on your hands. Just a thought. Love the videos and keep scrapping!

[@graemeallen3679]

Hi Ben been watching your scrapping videos have learnt so much so thank you.You probably have covered this but what Cisco servers are selling at the re-sellers. They say to take photos of what I have but moving so many is an issue for me as I have had major surgery and I am having trouble lifting and I just moved them but where I moved them isn't a great place to take pictures. So I was wondering what I should do . If they aren't worth much I will scrap them but before I do that I need to know how much I could get before I decide. Thanks Ben keep the vidèos coming 🤑😁

[@harryverboom4032]

There are some nice decorative boards ive got some myself i would love to have the 4 cpu motherboard when i open the new office ill make a nice circuit board wall

[@americasfavoritehoarder]

Some boards are downright sexy. I've got some hanging on my walls also.

[@Adem92121]

Ive got a few boards with 50 goldcaps eproms. So nice to see them. Groetjes

[@RafalScrapper]

cool amount or ram chips in one device wow 👍😀👍

[@jxavier3876]

You’ve been making awesome progress! Can’t wait to see the content that you will be able to do with access to the bench now👍

[@jxavier3876]

What the diff between server rams and pc rams? Just wondering.

[@richardburgess5215]

Im jealous, you're cold and I'm sweating my ass off here in Florida

[@kimlazzarini5563]

Richard Burgess don’t worry mate it doesn’t stay cold for long here

[@vw8796g35]

@32:30 the tes dipswitch have gold in it !!!!

[@teembo]

I recommend you keep cat 5 and cat 6 cable separate from everything else. You really should get more for it than low grade, especially that low grade ribbon cable you had there. Those are 2 very different pieces of wire. Once I started to keep wire categories separated, I started to get higher rates for them all. If the ratio is more slanted toward the data cable, with less cat 5 included, you'll get the lower rate for it. At my yard in California that means the difference between 0.40 cents and 0.75 cents per pound.

[@Drummerjuicer]

Hey, your scrap forum Australia website isn’t accessible. It’s redirects the browser to some sketchy website

[@davidlonergan3420]

Try this link mate, had the same problem scrapforum.com.au

[@markb4805]

: D good luck with the scrap

[@obiwan5667]

Great video Ben. Hope your lockdown gets downgraded and y’all can get around and get all the businesses back up and running. Would love to see the switches scrapped and that handful of PC’s on next video. Your content is always fun to watch and I always pick up some new info about scrapping. Take care... from North Texas.....BTW, Texas is finally bending the BEER VIRUS curve in the right direction..... hallelujah!!!! It is still not good, but we are going in the right direction.

[@altafrahman2254]

Hello Ben, I was watching a video of a Canadian scrapper yesterday. Two days back he took his copper to the yard and yesterday he released another video with the title "Copper prices up. Time to strip my cable". Not suggesting anything to you. Know very well that you dont sell your copper. What I am saying is that if Copper price trends are same globally, it is time to focus on copper bearing material, in your case cables, copper heat sinks etc. May be next video, you can separate cable to be stripped and store it somewhere because you will not sell your copper. You can get more bang for your buck if you can process your midgrade and low grade and take to yard.

[@markb4805]

Sorry

[@markb4805]

Did 6th

[@michal1618]

Is it worth it to pick up in street scrapping remote controlles?

[@jxavier3876]

Why you consider copper dead weight?

[@RoeMantic]

dont forget to like. hit the thumbs up!!!

[@myvicariouslife4012]

yes scrap comrade...

[@myvicariouslife4012]

I am glad u watch the godfather of ewaste

[@RoeMantic]

Thanks for stopping by before Rafal on Saturday Friend!!!

[@barrywest3758]

Hee hee love these videos

[@metakhorse2300]

50:00 i think you destroy old gpu pci . i have question you destroy 3DFX too ? in last years ? its debility . and 1:17:16 destroy colectible board . 286 pci think

[@markb4805]

😠😠😠😠😠😠😠😠😠😡😡😡😡😡

[@ramblingman8992]

I recently discovered that there is a PCB refining company 45 minutes drive from me. Pity I didn't know about them earlier when I had a load of computers from an old mate.

[@AllStarExt]

I think that's 2 in a row!!!! Wooooohoooo

[@brissyboy7164]

Excellent .......... Thumbs Up

[@maryannrussell7255]

Is that not palladium in the middle of the cpu

[@jxavier3876]

I have been lucky enough to personally be connected to a group that buys boards even before I got into e waste.

[@markking3280]

some of those boards look like a overhead shot of a large city

[@ROBERTSCOIN]

its strange to think that its winter in australia i bet its getting colder every day

[@kimlazzarini5563]

How do I know if a ram is 8gig .. where on the ram does it say 8gig?

[@eWasteBen]

It'll have 1gb, 2gb, 4gb or 8gb on it somewhere sometimes just 1g, 2g etc

[@kimlazzarini5563]

eWaste Ben do you think you could show different ram so I know which is which... you know worth money

[@davidweibel7111]

Been doing this for 10 years. Cost alot of money I'm on track to do this though. Just need to do it love melting gold.very .good thing.free gold.

[@sharkscrapper]

More fun than a barrel of monkeys? ... a barrel of CPU's 🤣 One of our common viewers commented that my garage was looking a lot like yours. After this marathon, I'm going to have to get to work cleaning mine.

[@janepeacock-baillie3380]

Omg ben your missing out. Those little yellow things you said tgat you dong bother with are the best of the best mlcc. They are just dipped. 10 times better if not more then the regular mlcc. 😆 they also come in blue colour. Love the vis still but will watch the other half tomorrow. 😪😪

[@ryanstruble5381]

Don’t you have to remove all those heat sinks to get a high grade on those boards?

[@greekgods3399]

love it

[@MiniJaym]

I wish I knew about the dip switches before I threw out about 300 of them 🤦🏻‍♂️

[@markb4805]

I'm 99 I hope that I will live long enough😣😣😣😣

[@tomthumb8346]

Do board buyers look at every board? with the amount of boards Ben sells, it could take days to examine them all!

[@niculanicolaeofficial9114]

Hi, i wanna ask you, how good will be for gold recovery an Hp Proliant Ml 370? Someone wanna sell 2 of them for 50 Euro, and i wanna know if they worth or not.

[@eWasteBen]

hard to say, we go by weight, maybe .25 euro per kg max

[@niculanicolaeofficial9114]

@@eWasteBen I have seen jusr the internal tape drive Ultrium is around 70 euro, so maybe worth it, thanks.

[@ROBERTSCOIN]

because of the weight of these servers you can't ship them overseas it would cost to much

[@vaughndumas]

Chooks!!

[@markb4805]

It's GOOD

[@hermannlc7753]

it is my Dream to Become The scrapper you are today, In argentina is a bit hard tho

[@markthomas625]

You have been busy. :)

[@raymondcote6669]

Where is your ELECTRIC SCREWDRIVER??? Geeez ben

[@markb4805]

WOW MAN

[@Reasonist]

Do you have a Karat Test Kit? Since you have quite the spread of cpu types, i would recommend you take a look at those pinless CPU’s with it. There will be variance but I’ve tested and watched video’s on other people who have tested the plating on them and IT IS GOOD. Yes the amount of gold is less than on pinned CPU’s, but the quality is very high. Get a kit and check yourself. Cheers mate 👍🏼

[@kermitwardell3345]

I'm ready for some street scrappingI'm starting to go crosseyed looking at all of these boards.

[@hohohoho1980]

Please make some live streams ?!

[@americasfavoritehoarder]

Yeaah. Boxes of stuff. I got you beat on that buddy. Now about those cables...and no. Don't scrap out the chickens.

[@altafrahman2254]

Forgot to mention. You are wearing an orengy or yellowish sweater at the depopulation table. Recently I watched one of your videos made 4 years back and noticed the same sweater. :) It must be very good quality sweater for you not to be scrapping it 4 years on :)

[@Bugatti-rh1ds]

8 x 8 is 64 lol at least in europe . simply a mistake

[@markb4805]

Why is every comment 6 months ago

[@scrapwomblecreatives6944]

LOL MAN THATS YA CHUCKS HUT POOR GIRLS HOW ARE YOU MAN OK I HOPE

[@jonathanwillis5719]

Rectangle = longer square

[@vaughndumas]

That cold and wind hit us here in Canberra as well.

[@richardpeter1935]

You going to scrap or talk all day

[@eWasteBen]

Both

[@platinumskies7968]

Can you do more depopulation vids full and partial depopulation vids would be cool

[@npolite22]

R910s aren't worth much. Maybe about $100 usd