DAMN!!!!! That sounds beautiful! Making such a great car now sound equally great!
@mtncguy855 жыл бұрын
This whole setup is like 2000 or 2500 bucks. If they dont show hp numbers than why are we going to pay for sound? Might as well get an axleback.
@441meatloaf4 жыл бұрын
Too much rice
@Goyxrd33 жыл бұрын
It’s 20% increase in power along with tune, that’s 30 whp so yes it adds power
@Goyxrd33 жыл бұрын
@@441meatloaf30 to the wheels isnt rice
@441meatloaf3 жыл бұрын
@@Goyxrd3 Its definitely rice....its a crossover thats trying to be a sport...
@jamesarriaga45922 жыл бұрын
I have a custom tomei I would like to hear this on my car with that exhaust saving up for it
@heyaisdabomb2 жыл бұрын
I recently installed these headers, and Avo doesn't seem to want to let my review onto their site I guess because they don't want negative reviews. At 8:08, you hear that tinny high pitch rattle sound under acceleration? That noise can be heard again at the end of the video during the acceleration. It will drive you crazy. It's the resonator vibrating like crazy making that noise. My cold air intake only makes it worse. You will gain low end torque, while losing high end torque, which the cold air intake then makes up for so performance wise, it's a lot better. But you don't get a clean subbie rumble. It's fouled up by that high pitch rattle, which the engineers at Avo Turboworld say is "normal". I would not recommend these and look for alternatives. Now I have to go to an exhaust shop to determine the best solution to fix this sound.
@robertshunter2 жыл бұрын
I can't speak for anyone else, but I'd certainly be interested in an update if you have one.
@latenitez232 ай бұрын
Yes I'm keen for an update too
@omegalamda31455 жыл бұрын
I sounds sweet. With the manual trans you’ll at least make some noise as your revving to 5k+ off the line. It’s pricey but is a jewel of a stainless with the off set exhaust manifold rumble. Face it Crosstrek is a crossover. One that has a 13-1 steering ratio, low center gravity boxer w awd nice for spirited cornering. Tack on the AVO and enjoy rowing the gears. $2500 pricey but for Michigan winters the Stainless will stand up against the salted roads.
@foxtrotalpha5705 Жыл бұрын
Yes it's what it's supposed to sound like. Should make it a standard for all Subaru models.
@jhingviray808 Жыл бұрын
Does this modification will pass the smog test in california?
@Mewzyc5 жыл бұрын
put it on a dyno
@midnitekitty793 Жыл бұрын
Am a able to put this on my 2018 crosstrek premium with a muffler delete?
@BadMoose34 жыл бұрын
Did you/ do you have any issues with Subaru’s factory warranties with aftermarket headers/ cat back exhaust?
@ironman1518. Жыл бұрын
Hello there interesting video BUT you left me very confused. I went to the AVO website to look for headers for my 2013 Subie Crosstrek limited but found nothing. Please help?? TIA.
@sevenphotos Жыл бұрын
This Video is for the 2018+ we are working on a header for the 2013.
@ironman1518. Жыл бұрын
@@sevenphotos Oh ok thank you so much! Any idea when they will be available for the 2013 please?
@Arthur_Winkle2 жыл бұрын
Will you need to modify the ECU? I’ve read that modifications may affect the warranty claim if that mod can be shown to be the proximate cause of the warrantied component failure. In most cases, mods to cat backs are allowed but downpipes or headers are whole different story.
@thumpin79532 жыл бұрын
That's my worry. I bought a 2022 Impreza hatchback and installed a Nameless quad tip exhaust. And I love the sound, but I would really love it with that Subie Rumble!
@Arthur_Winkle2 жыл бұрын
@@thumpin7953 I have the same thing you have for my 2019. I may mess with it a little more once my warranty is over.
@240sxCarson5 жыл бұрын
How different is the crosstrek from the Impreza, would this fit on a 2019 Impreza as well?
@JoeyyTube5 жыл бұрын
Touge Films yes! everything minus a few suspension parts are interchangeable between them, the cross trek is just a lifted Impreza.
@Rtryanp2 жыл бұрын
Any thing fit a 2023 impreza 2.0i 5 speed?
@Sssantos.5 жыл бұрын
Would that work on a CVT crosstrek???
@scottwilson84974 жыл бұрын
Transmission has nothing to do with exhaust. Yes, it would work.
@tribalz095 жыл бұрын
Sounds good! Crosstrek does not run the FA20 motor though....it has the FB20. I had the FA20 in my previous 2016 WRX.
@lgojumper295 жыл бұрын
tribalz09 yea, when I heard him say FA, I was confused cause it shares the same engine as my 13’ Impreza
@mackb31645 жыл бұрын
The headers should be a factory option with a sports exhaust. Sounds great. Needs a quad tip option... Have you put it on the dyno yet?
@nomadmav70403 жыл бұрын
What does it sound like avo headers/mid with stock rear?
@JoeyyTube5 жыл бұрын
Any engine lights issues with the headers? I have the catback and love it so far, looking to complete the exhaust system
@jackriches60165 жыл бұрын
No issues with engine lights.
@tnyce6163 жыл бұрын
You still work at ipd?
@MrTheurucan4 жыл бұрын
Is it truth that a car will lose some Power with UEL Headers ?
@heyaisdabomb2 жыл бұрын
You will gain power from this because it flows better. I notice a fair bit more power. But normally, yes, Equal length will give more power than UEL.
@conch18115 жыл бұрын
Any Dino numbers before and after ?
@Goyxrd33 жыл бұрын
With the tune included it’s 30 at the wheels
@slyr15 жыл бұрын
Ya that looks like Quality and sounds great but to loud on highway. Is that header ceramic coated high temperature paint or is it gonna RUST??? Regardless it’s way to expensive not worth the PRICE
@sevenphotos5 жыл бұрын
Its full 304 Stainless Steel, Flanges and all it will never rust.
@pakdds5 жыл бұрын
Where did you get it installed in Portland?
@ScramblerOfDakota5 жыл бұрын
Does the ecu need a reflash after?
@sevenphotos5 жыл бұрын
No it dose not require a reflash
@vaultdweller075 жыл бұрын
When the set up was installed, was it warm or cold start? Last part of the vid
@sevenphotos5 жыл бұрын
it was a cold start after the install.
@vaultdweller075 жыл бұрын
@@sevenphotos nice! Do you have other clips of it on the road or while running? Tried searching but can't find any.
@tylerbunten79683 жыл бұрын
I went with a nameless performance muffler delete for like 200 bucks.
@thumpin79532 жыл бұрын
I got the Quad tip muffler set up and love the sound.
@chriskolb72385 жыл бұрын
Will it fit the 2017 base model hatch back
@jackriches60165 жыл бұрын
Can you email to lee@avoturboworld.com
@tylernelson79953 жыл бұрын
I just came here for the comments after I heard it. 😅
@utube2305 жыл бұрын
Voids warranty I assume. I'd stick with nameless.
@kaliguy473 жыл бұрын
Ya.. so after thousands of dollars in fancy exhaust, still not gonna get Subs murble.. Beautiful welds, acid dip, etc bit why?
@MrTheurucan5 жыл бұрын
Is this also possible on a subaru levorg ?
@lgojumper295 жыл бұрын
MrTheurucan so the Subaru levity is actually a fa20f engine so it’s quite different from the cross trek dude to the fa series being lighter, it doesn’t share the same block
@wtre4284765 жыл бұрын
HP
@umbertolorenzi26433 жыл бұрын
Subaru music
@K03sport5 жыл бұрын
too shiney for the Crosstrek crowd. If you coat all of the pipes black, then they (Crosstrek owners) might go for it. Remember, Crosstrek owners drive through dirt, mud, shallow streams and a highly polished exhaust it the last thing I would want to worry about...plus, it lives under the car. Shiney is for the BRZ/86 population.
@Advntrwrx4 жыл бұрын
Not one of us is gonna spend 2 grand for no gains in HP
@nosvibes97862 жыл бұрын
Agree. Would lovr the option for powder coated or oem look
@Moonface00z4 жыл бұрын
omg we need this in asia
@LIL-RJ Жыл бұрын
Would Sound better straight piped
@javimerlin43705 жыл бұрын
Tommy
@herschelwalker5915 жыл бұрын
To be honest that sounds horrible, its too "tinny" a nameless axleback sounds better than this..
@weatherman53005 жыл бұрын
Sounds horrible, waste of money. I’ve got a custom 2” cat back to a 4” tip. Cost me like 40 bucks, it pops and bangs like crazy and has the subie rumble, for a fraction of the price
@jtszwanki90624 жыл бұрын
Weather Man what brand is the custom catback? trying to find something for my car
@weatherman53004 жыл бұрын
Jt Szwanki I’m a welder by trade, and I have had enough cars that I’ve cut off mufflers and piping here and there that I made my own. I unbolted the exhaust from the cat (which is in line with the front wheels) and welded pipe about 13 feet down the center, utilized the hangers that were already there, and welded like a 40 dollar 16” 4” outlet stainless truck exhaust from Canadian tire 🤣 🤣 NOREGRETS!
@wtre4284765 жыл бұрын
Probably a worthless...expensive system....plus labor...I would recommend leaving it stock...probably voids warranty too...put your money in a good set of tires...It is AWD....and a nice set of seat covers and floor mats.....Pratical things for a practical car....Subaru sells 300 HP models for upgrading performance......"THINK"