Redcat Brushless Harvester 800 Gen9 hobbywing 1800kv SE

[@YouHeckinBetcha]

I added the brass portal covers and it feels like it’s glued to the ground now! Great truck.

[@cyclonerc1625]

Good morning Joe & All ☕ Cheers

[@davidpigg3942]

You read my mind when you 1st showed this truck I said it was a perfect candidate for the new fusion SE.

[@markhinkle3234]

Great video showing the Fusion! Every time I see this new Redcat, I’m impressed! I really liked your install/running edit. Very cool! Thanks!

[@MangoJim90]

And music choice also😃🙌🌞

[@hyperlogos]

Really impressive. I look forward to putting the 2-speed transmission in my gen8, and I hope they make a front axle only kit available so I can upgrade to U-joint without having to buy a rear axle I don't need

[@BangForYourBuckRc]

Really luvin this Rig ! That new brushless made a definite difference! Love you energy dude! Your a great host!👊🏼😝✌🏻

[@Tight_Lines_Uce]

Awesome job on the video editing 🎥🎬. 👏🏼👏🏼👏🏼👏🏼. Love the Split View of you wrenching and running with the stock setup. Keep em coming

[@ExocagedRC]

Thank you. I figured I’d try something else. Maybe I can do more of them

[@cliffordaldrich4189]

Another great video, the model looks like a lot of fun.

[@ExocagedRC]

It is!

[@BlackUnitAdventureSport]

That Gen9 look Dope..

[@my89foxbody1]

I like the split screen!

[@ExocagedRC]

Thank you

[@booboomarshburn1577]

These damn crawlers are addicting!!!!!

[@paulcook1275]

I put the fusion 1800se in my gen7 with portals and under some loads it'll set and chatter and not sure if it's geared too high or my settings r off somewhere I haven't had the fusion pro or the OG 1800 fusion do that I'm wondering if it set it up wrong

[@CasperRc81]

Absolutely love my 1200kv in my Capra with an 11t and even 2s. No better system have the 1800kv and the 1200kv pro and I think I prefer the 1200kv’s. IMO I cannot get enough of the slow crawl. Those trucks are beautiful and hats off to Them on those universals and the steer servo.

[@bucksrcworld8119]

this thing rips with the se. awesome crawler for sure, just add some brass like you said down low.

[@gatorrcgames]

Good video man! Great slow motion action!

[@rc-daily]

Really like what I see. Hopefully these axles are great so we can possibly use them on out chassis builds

[@ExocagedRC]

I hope so too

[@rc-daily]

@@ExocagedRC I'd like to know how wide they are. They seem wider than the trx4 axles for sure.

[@old-rcplane-phart]

@R/C Daily 5mm wider per side. The lockers are 5mm (2.5mm per side) shorter than original gen8 v1. Gen8 v2, axe, & 9 use the same 'diff cases'. Hope that helps.

[@ethaneggloftis]

Hopefully the grub screw with no loctite doesn’t fall off when the bear is after you 😁

[@teknolem7426]

Lmao. I just lost my grub screw to both axle drive shaft pins. Definitely i used on the new ones

[@nhmtrhd]

Does the Gen 9 come with earplugs? The transmission is soo loud!!! 🤨

[@Michael19B59]

Good looking rig! Let's see some more upgrades.

[@ExocagedRC]

That's the plan!

[@fernsolo]

I need to get me one of those motors, great video man 👍

[@ExocagedRC]

You should they are awesome. But sold out everywhere

[@chrisgerwitz8852]

Awesome rig and wish I could afford one

[@MichaelWilliams-ei8cr]

They've come a long way since my old Everest10😁😁😁

[@ExocagedRC]

Sure have

[@RuisRcAdventures]

I gotta say that bodyshell is till growing on me, apart from that it looks like an awesome truck. That Fusion though, i gotta have me one of those soon. 👍

[@A-a-ron01220]

Im still waiting for the SE's to come back in stock, back ordered it on the 4th. Super hyped

[@fishnrc294]

I just saw them a think at Amain. I’ve had mine for awhile now & for that price I’m more then happy with it.

[@A-a-ron01220]

@@fishnrc294 That's where I back ordered it. Amain support doesn't know when they are getting more.

[@Ginga_Ninja_RC]

The Fusion SE is perfect in that. Probably could use a couple more teeth on the pinion. I know it’s a bigger body but I’d love to see how it looks on some class 1 tires and wheels. Maybe the Proline KM3s?

[@ExocagedRC]

I plan to drive it in C1 at our next comp. We will see!

[@Ginga_Ninja_RC]

@@ExocagedRC lots of scale points if you guys did them. Be sure to get some brass on it before you comp it :)

[@clarkb1900]

@@ExocagedRC Duratrax has some new C1 tires- the Ascend and the Pivot. :]

[@mikeyd271]

What kind of electric screwdriver do you use

[@JW-cn6op]

Definately needs some brass to hold it down on the steep climbs and sidehills.

[@kelvinburks23]

Ugrc predator chassis would be sweet

[@product1982]

does this connect to the stock radio or will i need another radio, i'm pretty new to this.

[@ToGrimmToWin]

Would the fusion set 1800kv be ok in the marksman on 3s and would it be faster or slower than stock?

[@ToGrimmToWin]

Also was you using 2s or 3s

[@hoosierbuddyadventures]

Did you swap out the trans servo? I heard they are weak

[@KEVLAR_RC7275]

Damn that thing looks sexy driving around.

[@zoridor16]

Hello friend, how are you? I want to buy my first crawler and I want it to be a redcat gen8 (it's just that I have some doubts) I have seen videos where they put Brushless motors on the Scout 8, my doubt is that they are not designed for high-turn motors? a brushless motor can damage my gears and differentials (transmission) greetings to you  😊

[@BenSuzi1980]

Just 😍

[@farmoboy83]

is this sold with different name/brand in europe?

[@old-rcplane-phart]

😁👍

[@joenodetail3499]

How long did it take you to get your fusion se? Your videos basically spurned me to order two a couple weeks, im excited to install and try them out !

[@vbspeed7571]

This is a sweet rig

[@A-a-ron01220]

Video idea, pull the trans out of the 9 and put it in a 8 and see how it does. Redcat has confirmed it will work in the gen 8

[@creekcreeperrc7972]

Noice!

[@NCMATT]

Put the aux out of gen8

[@oliverstoys8411]

👍🏻👍🏻👍🏻

[@redndeyes]

Still with the brass pinions huh. Why. Plastic would be better if they're pinching fractions of a penny

[@johnwayne666]

All it needs a action figure

[@jimbocreationsbu8203]

looks like it can benefit from a set of Deez limiting straps

[@ExocagedRC]

I think all scalers can benefit from them

[@nikolajc7617]

Why show how fast the steering is when its total unrealistic speed anyway??? Torque are more important than speed.

[@Trevinator1990]

thumbnail shows cut tires.

[@ExocagedRC]

Fixed it. Those are the JConcepts hood tires. They are for the next video of it. Sorry about that.

[@old-rcplane-phart]

@Exocaged RC You've already got another vid!🤪😳🤯🤷‍♂️

[@toolbaggers]

Not a fan of the split screen. You have to split your attention. It's like driving and texting at the same time (not a good idea.)

[@ExocagedRC]

Well, yeah I can see that. I wanted to try something new. Some like the building parts and some just want to see driving. So I have an option.

[@whitsrcleftovers2707]

I've always thought the same thing. The rc car should scare a wild animal off... or at least we hope lol.

[@ExocagedRC]

I’m sure an Xmaxx would make it think twice. Not so sure about this one. LoL

[@blakedenley3792]

Not a fan. It's just a big square on wheels.

[@old-rcplane-phart]

Different strokes. 😭😭😭

[@jonthomas8487]

At least it’s not another freaking Jeep

[@old-rcplane-phart]

@@jonthomas8487 👍👏👏👏👏👏👏👏👏

[@DoubleADay]

@@jonthomas8487 👍👌