Great Video - thanks. I am using the Audient SP8 with a RME UCX II and it works great. I could not hear any difference in the preamp quality.
@Iam_Leksign04 Жыл бұрын
Great video Ed. Buying the EVO 16 was one of the best decisions I made with an Audio Interface. It is a great piece of kit and the preamps are up there with the most expensive ones out there. It is nice to see the SP8 being released and I'll be adding that to the collection soon
@EdThorne Жыл бұрын
Thanks, Emmanuel. Yeh, I’m probably ditching my complicated and expensive drum recording set up for these because Smart gain is so useful when recording on my own. 🔥
@craigchapman1680 Жыл бұрын
Thanks Ed. I've pre-ordered the SP8 to go along with my EVO 16
@EdThorne Жыл бұрын
Excellent! That’s a killer studio set up.
@caspermaster-com Жыл бұрын
Works absolutely perfect with my RME babyface too, the sp8. Conversion is great too. In a blind test I can't pick them out vs the rme in a loopback test.
@EdThorne Жыл бұрын
Oh, that’s interesting. RME have very loyal fans who usually smash everything else. Interesting to hear the SP8 competes from an RME user. Thanks for commenting 🙂🤘
@caspermaster-com Жыл бұрын
Yeah, audient is great. Technically the rme nulls better (quieter) in rellation to the source than this audient when testing, but listening blind I cant pick one out.
@SeanHyland Жыл бұрын
@@caspermaster-com Also, the preamps on the SP8 can be bypassed, so it's a great companion to the BabyFace for connecting outboard gear via ADAT. I also have the BabyFace and plan on getting the SP8 if Perfect Circuit has a Memorial Day coupon and has it in stock.
@caspermaster-com Жыл бұрын
@@SeanHyland To bypass them, is it to put them at 0 gain or something else? ☺️
@FreshBagelz Жыл бұрын
Been waiting for this! I was considering getting the evo 16, but at NAMM they told me this would come out soon
@EdThorne Жыл бұрын
Well, someone broke their NDA there 🤣
@FreshBagelz Жыл бұрын
@@EdThorne right! I got lucky haha
@samnarjinary Жыл бұрын
Great job once again mate.
@EdThorne Жыл бұрын
Thanks, Sam!
@CreativeSauce Жыл бұрын
Nice video Ed!
@EdThorne Жыл бұрын
Thanks, Mike!🙏😊
@HarvinderSingh-yy8th Жыл бұрын
Excellent knowledgeable video.
@EdThorne Жыл бұрын
Thank you! 🙏
@damion2226 Жыл бұрын
Nice video, but would really love to hear more about the quality of the pres and comparisons.
@EdThorne Жыл бұрын
Check the links in the description.
@anthonyvasquez9737 Жыл бұрын
I had the same question, but bought one anyway and the preamp quality and converters sounded a lot like my Focusrite Scarlett that I use on tour. I thought it was going to be a cool I/0 expander, but it definitely didn’t match my Apollo converter quality and the difference was very obvious. If I was looking for an expanded live setup, or already had an audient interface, this would be perfect!
@bobisadrummer Жыл бұрын
Makes me wish the EVO 8 had an optical in. Very cool none the less.
@EdThorne Жыл бұрын
Maybe they’ll do a Mark II version at some point.
@uncleted39619 ай бұрын
It does
@EdThorne9 ай бұрын
The Evo 8 doesn’t. The 16 and SP8 do.
@BoboRenthlei5 ай бұрын
Hi Ed. I’m currently running the sp8 through the adat out of my apollo x8p and i’m getting -8db difference in volume between the two when using my analog summing mixer and some hardware inserts. Is it possible to level match the two output without adding gain from the preamp of the audient sp8? Cheers!
@vladagordanic57410 ай бұрын
Have one question about ADAT connection, do one need to instal software of both interfaces on PC or just software of master interface, not the slave?
@sonicbrush Жыл бұрын
Hi there, could you re-amp (or route to analog gear) from DAW out through adat outputs through SP8 analog outputs? Much appreciated and great informative videos. Cheers!
@EdThorne Жыл бұрын
The SP8 can be used as an ADAT output unit, yes, but you'd need another unit to take the returns. You can go directly out from the pres, but again, would need to be back into another interface.
@sonicbrush Жыл бұрын
@@EdThorne So that would be my motu 828 analog line inputs back into the daw to record the new re-amped or outboard signal. Will be updating to Evo 16 but the current budget says buy the sp8 first it works with any interface
@ChopKnives Жыл бұрын
Just wondering if using with an Apollo Twin, would everything be controlled via UAD console or would I use the Audient software?
@EdThorne Жыл бұрын
There is no software with the SP8. The software I demod in this video was the Evo Mixer App. The SP8 would be recognised by your Apollo and the 8 ADAT inputs will show up for mixing/processing in Console. The 8 outputs would be assignable in the Console I/O Matrix but the Twin doesn’t have ADAT out so these aren’t available to you.
@-PAT-19 күн бұрын
Hey Ed, thank you For the Great Video. I ordered the SP 8. I want to expand my Apollo x8P to include the eight inputs of the Evo. If I connect the Evo to the Apollo via adat, should I still use the word clock connection? Sorry, I don't really understand it yet. Thank you
@EdThorne19 күн бұрын
For best results, I suggest doing that, yes.
@-PAT-19 күн бұрын
@@EdThorne okay thank you!
@ThrillaPark Жыл бұрын
Will this work with Universal Audio Apollos?
@EdThorne Жыл бұрын
Yes!
@chinguunamarsanaa7491 Жыл бұрын
Hi. Quick question? I have apollo twin usb. I ordered evo sp8. I will get it soon. How can i connect to sp8 from my audio interface. What cables do i need? Trs to trs or Xlr to Trs? Which input, output to connect? Where can i connect my microphone on audio interface mic input or on sp8 mic input. Thanks.
@uncleted39619 ай бұрын
Why did you buy it if you have no idea how to use it with your existing equipment?
@joshuatvernon10 ай бұрын
Will this work to expand an Apollo Twin?
@EdThorne10 ай бұрын
Yes!
@ronaldnollet146110 ай бұрын
I have a RME UCX FireFace 2. ( new ) is the SP8 compatible....??
@EdThorne9 ай бұрын
The SP8 is compatible with any ADAT connected device.