EXPERIMENT: Shock Absorbers in Bicycle Wheels

EXPERIMENT: Shock Absorbers in Bicycle Wheels
In today's video, I want to show you a cool experiment - shock absorbers mounted on bicycle wheels!
If you like this video - don't forget to subscribe :)
Production Music courtesy of Epidemic Sound www.epidemicsound.com

[@jhwblender]

Are we not gonna talk about the amazing quality of the video production!?

[@lemondemon7]

No.

[@maciejborodo5305]

You mean a amateur cook ideas quality?

[@Pushyhog]

we could. good light. edit aint bad. Action and timing.

[@alexpasko9540]

Jesse Wood seriously everyone in the comments are just all hate but he put a lot of time into this

[@asura---]

Comment section was full of hate but they don't know how to appreciate someone's work and also time exerted on this video.

[@jakejansen16]

One major design flaw was how the shocks weren’t set with sag, so when the shock closet to the ground wanted to compress, the opposing shocks couldn’t extend any more which prevents the shock that is taking impact from compressing.

[@ninjahunterx7497]

So as in the video, the rim has to deform in order to take the impact, right? If it was done the way you said, the shocks would do all the handling.

[@comosinadaayala1522]

🎮

[@jakejansen16]

@@ninjahunterx7497 correct

[@dday734]

That rim will be bent in no time

[@jakejansen16]

@@dday734 Yeah didn’t think of that at first but would need to be a BEAFY rim to say the least

[@axtuall_fruit5931]

Am i the only one impressed by how good he drew the bike in the beginning?

[@opporadibachu5677]

Fuck of noob, only I am gae

[@ofcjulian739]

Yes

[@axtuall_fruit5931]

@@ofcjulian739 oh... ok...

[@dandcc9192]

I don't understand what's so impressive about it.

[@paulcabaces]

Yes

[@davidprice1074]

I’m convinced he has about 50 of these bikes lying around

[@gauravkumarmadhukar8889]

Lmao

[@bigboyeatdrinkhoon6082]

Yeah, same sort of bike in everything

[@aleksihuttunen7322]

Yea he has bough these super cheap fatbikes for kinda useless experiments

[@3enjamin]

@@aleksihuttunen7322 At this point, the experiments surely pay him well via KZbin incomes. He has 12milions subs. Beside it's inspired tasks.

[@notBadcaptain]

Bike after bike

[@seemly]

Well, it's not about his bike's wheels, it's about the views that he gets from Making this.

[@fixedfocusfilm3068]

Clearly

[@thomas-ud1fs]

How fucking postmodern is that

[@rafaelrp07]

At the end of the month he has an income...

[@tb8708]

Just another 5-Minute Crafts/BRIGHTSIDE channel, the side of KZbin that I was ashamed of myself to watch at one point, got recommended this only to find out it's just another pointless KZbinr.

[@waymoretheoutlaw5895]

It is a cool concept, just not very practical lol

[@user-fi1xu1pp7p]

As an engineer, the rim it self can warp if it is prolonged to flexibility at a center focal point of origin on the rim, which is the hub where the bearings are also that. That's why it is best to keep a rim very hard and stiff with spokes and let the shocks flex on a frame or chassis of a bike or car.

[@TeamCykelhold]

Also, side loading suspension like this is just impractical and completely unnecessary from a common sense standpoint. You don't need to be an engineer to see how bad this design is.

[@turbofan450]

Guys. None of that is the point. It's about views. Sweet, succulent views

[@christoff124]

yeah this design is idiotic

[@edwards8383]

The lateral rigidity was shocking

[@another3997]

​@@TeamCykelholdI think you've missed the whole point of the video... it's called entertainment. People like to have fun experimenting with things, not because it is the best way, or even a good way, but just because they want to see what happens. You do remember about having fun?

[@johannesmuller1288]

I think the rim is more flexing than the Shocks absorbing

[@twingolord]

Johannes Müller it’s the tire that’s flexing

[@reapanomin899]

I think that at some point,there would be some flex where the hub was cut.

[@thomashardbattle4287]

@@twingolord no the spokes tension a rim so remove them then yor rim will flex. Don't try outsmart me.

[@kundan7711]

Rear wheel should be a little tougher

[@Roadking556]

@@thomashardbattle4287 yes and no longer hold true. So as the rim flexs it is no longer a true circle. Like someone said he made the bike worst.

[@sneakyplays101]

front tire: falls chain: 1 inch rear tire: falls chain: to the ground

[@xx-----------xx873]

Yep, that's how chainslap works

[@cat1800]

@@xx-----------xx873 nup

[@jadenyork4560]

no clutch mechanism

[@squeezablemayonnaise8904]

Cluthless derailer 🤷🏼‍♂️

[@justsomeguywithasmolmustac9476]

5:35

[@IAmNumber49]

As a non-engineer, I enjoy reading the comments section

[@fixedfocusfilm3068]

Lol, me too

[@amazinggames4985]

P

[@THE-BUNKEN-DRUM]

SHUT YOUR FACE! :-P

[@vitorramos6820]

Jjk

[@vitorramos6820]

G bom fduk tu oo

[@aswin9954]

This is an example of : "Bad idea Great Execution"..

[@rikkarokassa]

"Greate execution" couldn't say that

[@shot.2d_]

Well idea is great but the execution is horrible, he basically relies on the flexibility of rim to push the "suspension" but he should have preloaded each one of them to work properly since now it's basically the same as before but only 3 tough spokes imo

[@Mrow405]

@@shot.2d_ para que amortigüe la caída, los otros dos muelles deberían estirarse.

[@thiagosilva-rj8ub]

Hahahahahahahaha

[@4nlimited3dition_4n3d]

​@@shot.2d_ Yeah, you can see on the video, the shocks can only compress. They cannot stretch longer without braking. So the shock above the wheel hub tries to stretch(but cannot) and the two below try to compress(but cannot either because the third shock above prevents this). So basically this configuration will just destroy the shocks and rims and probably the bike frame as well, along with the rider smashing on the pavement as a result.

[@sumitbhardwaj895]

I think with few days of use the tyre metal rim shape will be distorted

[@MohdAzylee]

You can already see it at the first place. Its unbalanced

[@anssc587]

Yup

[@jedreviewstvs8276]

Perfecto..👍👏

[@37401982]

I remember having an idea like this when I was a kid but with no practical knowledge on how to make it happen. thank you for building that thing. it's awesome looking.

[@DDD-wt7ly]

5:24 this bike is basically unridable. It seems cool to think about but it’s basically like trying to sleep on jelly. The bike is wobbling around because the wheels don’t offer a stable platform.

[@Thejohnnyoshow]

also i think as the shock on the bottom compresses its working against the shocks at 2 and 10 because they would be stretching. probably the wheel would fall apart after a while as it was designed for 30+ spokes and now only has 3

[@py1211]

Also the three shock absorbers weight much more than the spokes giving the bike more inertia.

[@damusdeshi622]

He actually needs somekind of engine to strengthen the pedal for this kind of bike..

[@Thejohnnyoshow]

@Martyr4JesusTheChrist interesting, well in any-case i still feel his wheels on his bike would still fall apart, they are designed to be supported at 36 points not 3, but the softwheel does show the design does have merit if you have a wheel designed to handle the load with only 3 spokes.

[@jellofish9668]

It can be made possible by adding multiple tiny shocks and a non welded wheek but thats the kinnda stuff that take ywar of redesinging not just a week becasue tiny shocks probably wont be as good or even close to an origonal shock and the wheel also needs to be remade all I am saying is its possible just not simple or easy in any way

[@brianhuber9148]

I think the springs have to be compressed a bit when putting them in so they can move properly.

[@bananasstuff3344]

Exactly! they need to be pre sagged!

[@1karkar492]

Yeah , in his configuration the suspension would be locked all the time

[@brianhuber9148]

@@1karkar492 exactly.

[@s1bh4mgodfl3shx]

The chain almost touching the ground in slow-motion gave me anxiety

[@prod.wenzon8603]

Thats normal :)

[@lawsonroesch101]

That’s normal

[@jonnettomuus2237]

Cheap groupset

[@mtbak8580]

They is completed normal for a chain to do that. The derailleur is doing its job

[@jakeelliott8059]

@@jonnettomuus2237 it's not the groupset pal it's the derailleur. That why you can get rear mechs with a clutch system to prevent the 'chain slap'. The quality of the rest of the components deosnt matter, even the cheep stuff ie chainring, freehweel/cassette or chain arnt going to stretch

[@Jasper118]

I can’t tell if the filming, editing, or tinkering is more impressive

[@willshawyer7280]

Thanks for not stretching it out 30 mins and clickbaiting. Well done

[@Quijano047]

Congratulations, you've just made your bike worse than before.

[@MrAnonymousgentleman]

I dont think he gives a shit pal hes experimenting meaning he doesnt know the outcome and hes not saying "this is how improve your bike" lol some people just wanna be offended

[@chucko4415]

@@MrAnonymousgentleman dude it was a joke chill you're the one getting offended

[@MrAnonymousgentleman]

@@chucko4415 how am I offended? and how do you know this comment was written as a joke? are you the comentor? No, can you read minds? No so how would you know anything then? Oh yeah you wouldn't lol and if the guy was joking why not put something to show that like a winky face

[@chucko4415]

@@MrAnonymousgentleman you really don't understand ironic humor. Seth actually jokes about how mad people in the comments will be. This is obviously a joke on that. You also have responded to people you disagree with very harshly you should probably work on that if you ever want to make friends.

[@MrAnonymousgentleman]

@@chucko4415 harshly? Have you ever met a British person? I wasn't mad at all and I can't read minds but I would be happy to hear it from the op not a random

[@jeovag9505]

this video deserves a thumbs up just for editing, the guy is brilliant in projects

[@edwinsaunders326]

Anyone from that annoying 6 part tiktok? That still doesn’t show you the end result!

[@FAKEwrlds]

Yup

[@Jayzss]

Ye

[@chrisoverbey7232]

Fat tires with lower pressure have enough suspension. That bike is probably heavy as hell. Looks cool though.

[@smoranc]

Chris Overbey I thought exactly the same as he was inserting one of those shocks... imagine 3 per wheel and then multiply by 2!!!! At least 80 pounds of bike!!!

[@another3997]

Fat tyres are like springs, but springs alone do not make suspension. That's why you need shock absorbers with controlled rebound etc. On top of that, clearly this isn't a serious attempt at making practical suspension. It's called having fun doing whacky experiments.

[@dallasdominguez2224]

" Well it definately looks cool" -Engineers

[@DG-hn2sc]

Dallas Dominguez hahah I legit said that to myself at the end😂

[@ramzanali3063]

Dallas Dominguez

[@DanielSanchez-ec3oi]

Yes 😂

[@stir_stick]

For the love of God.... buy a hole-saw kit

[@penttijakonen3817]

Yep... I'm pretty sure he can afford that and it's worth it for sure.

[@Walthar]

My thoughts exactly xD

[@rajgill7576]

And spend a weekend welding scraps first... laughable skill level here

[@sidiqmarodix485]

Hole saw kit for wood?

[@arcas5206]

@@andyk192 you definitely SAW that. I'll just leave

[@abhip3606]

Somebody, please get this man a plasma cutter.

[@ebtesam0806]

When you learn physics online during lock down 😂

[@techlappy4055]

Then u will figure out this video is useless so is that bike.

[@AF.256]

Techlappy the bike isn’t useless because you can still ride it and go places

[@CozminVasile]

It is a useless concept, if you put the suspenssion on the rim not only you make the entire wheel weaker but you make it slower.

[@domino5711]

Blah blah blah it's for fun and entertainment you nerds... It's obvious that it's useless

[@budman8926]

@@domino5711 it's not even entertaining....

[@Pa3MeC]

That thumb up at the end means "this sucks!" lol

[@jyates242]

😂

[@Pa3MeC]

@Nish Kumar wut

[@weallliveinasimulationrain1310]

I love the last song "is it worth it idk" lol

[@kumarsaaransh]

which song is it? i love it too

[@Andrei_555]

Спицы нужны колесу для придания жёсткости, чтоб не погнулся диск. Ставя на их место пружины, вы обрекаете его на всевозможные замятия

[@mr.aleksander5319]

Совершенно верно. Будет ездить на овальном колесе

[@cameronholcomb6578]

Shouldnt all of the springs have some preload so that when one spring compresses the other two could extend? Seems like its just kinda click baity to me...

[@OurNeighborsCat]

Seems to be this channel in general, but I do keep clicking...

[@olivierlenfant124]

The thing is : spokes do not work in compression, but only in tension.

[@WalterWater]

I thought the rim would just snap

[@jonathanbrown2485]

Martyr4JesusTheChrist Bro shut up

[@necreiP]

this isn’t a physics video... he wanted to see if you could ride a bike with springs it’s not supposed to be serious dude

[@ras8kuja]

Came to comment section to hear how this is bad idea but well executed.

[@samsmbn5794]

Haven't seen whole vid yet but how would the rims flex

[@sidharthek8467]

the query

[@sidharthek8467]

rim not flexing

[@sidharthek8467]

the tyrecombress

[@rade_fritz5125]

The center of the rim moves more than rim bends

[@Aquanorte]

Ahah exacly what i thought

[@belfonzus]

These bike builds are usually pointless and generally make the bikes worse, but I always enjoy watching them for the creativity and the flawless editing.

[@AbdulRahman-xh8rn]

I love how you dont talk and waste time 🔥

[@josephshotridge3278]

The entire video is a waste of time lol

[@MotorMenaceFPV]

Just so were on the same page... this is faulty engineering at its finest. When one shock compresses it bends the other two out of shape. The wheels will be pretzels before you get home. The design is bulky, costly, and impractical. If those shocks were used correctly this ride would still be a nightmare because the rider is too light to cause a recoil on suspension that stiff.

[@MegaErnieMAN]

Not to mention the extra energy needed to pedal... this was just for fun I hope

[@TheBillzilla]

I was going to write that as well, thanks.

[@cameronbright7651]

They are on pivot points but you are right faulty because they cant compress due to fighting ea other because they are already completely expanded.

[@KrazyKotYoutube]

Well, the title just clearly show “experiment”, so... it’s not exactly going to be a serious concept is it.

[@MotorMenaceFPV]

@@KrazyKotKZbin I dont know, I would argue that every serious concept started out as an experiment. Constructive criticism is a tool for improvement. 👍

[@ElderSkates]

Super cool, impractical, project :) In 1903 Renault made 2 cars where they used shock absorbers (5 of them) in a similar geometry to your 3. This was a suspension solution to combat the rigidity of the solid rubber used on rims at the time. That same year vulcanized rubber started being used which allowed inflatable tires. Obviously inflatable tires were far superior in solving the issue. But hey, it's fun to make impractical things sometimes. So I live this!

[@frankbob4043]

On the fence on this one. It's a cool idea, however there are some major structural issues with this design.

[@skunksrus007]

I’ve not seen Mig welding that good in years 😂

[@rupuboost4267]

Its a (somehow) good idea but i would have used softer springs.

[@2baer]

and more springs bc of the gap between then it doesn't work great

[@Jarl2392]

@@2baer hold on doesn't adding more springs increases the feedback from the dampening? The whole reason for the springs is to soften the road if the dampening is to stiff it wouldn't do anything

[@2baer]

@@Jarl2392 more tynier ones bc the tire is round

[@bobbydavis3474]

With the springs on it it still allowed the tire to be squeezed against the frame, if it hadn't the whole damn thing would have collapsed! Watch the video closer!

[@gytispranskunas4984]

Wheels are very unstable, with softer spring your wheel would start touching forks in corners...

[@iliketoast7181]

It really bothers me because they aren’t facing the same way

[@screwsnutsandbolts]

Great job. The wheels look a little bit wobbly though

[@chandangraham1091]

I spent a good 5 years wondering about this riding to school every day

[@krum81]

Let’s start a Go fund me to buy him a hole saw bit .

[@iepeulas]

Haha. My thoughts exactly!

[@peterfitzpatrick7032]

🙄😂😂

[@aaronberk1234]

Seriously. All that creativity and those other tools... And he doesn't own a metal cutting hole saw? 😫🤪👍

[@jtdetails5298]

j Krum we already raised 600k for his lube go fund me. He loves working with his hands.

[@saddekko77]

It wont be as cool tho

[@hectorperu28lima17]

Es un claro ejemplo de que si no intentas algo no sabrás si es una mala idea . Buen trabajo ! Lo malo fue el resultado

[@markdring215]

Lol. All the 'engineers' on here giving it large ! It's a demonstration of brilliant fabrication skills. And even works to some extent defying the laws of physics. Well done from another engineer and cyclist.

[@kennysender6804]

“Great things are only successful from trial and error “ Well done :)

[@neillanders8292]

Scrolled and scrolled before I came across the first positive comment.

[@Carlos_Henrique_Racing]

Parecia que ia ficar muito bom até ele colocar na roda kkkkkkkkk

[@NoobAF12]

That thumbs up in the end tells how good it was 😂

[@yt_over3680]

There's no proportion and balance on that . Nice edit bro.

[@tonygonzalez305]

I respect this guy for not wearing a Carhartt pocket shirt

[@waqas7979]

I respect everyone who doesn't wear Carhartt

[@lumberjack8261]

As a mountain biker this looks dumb, but still epic build 🤘🤙

[@matchaki268]

Agree

[@vixspeed5698]

I love how he’s hand tightening the bolts and not putting lock tight on it

[@BikesBlades]

Likewise, the rim brackets were attached with regular nuts and not nylocks...

[@COP0351]

Yea but those welds. Ewww

[@shortcut101]

Bicycle seller: "Ahh this guy again. Gudluck bicycle. He's your master now" The bicycle: "Wait what do you mean by gudluck?! Why he need more bicycle?! What happened to my other siblings?!"

[@cray1801]

The positives, great execution and a quality video = entertainment

[@rainey06au]

Not his best invention. It seems like when one spring needs to compress the others don't actually have much unsprung space to modulate. That combined with less rigidity in the rim and the overall risk of having a catastrophic failure of a spring (out of 6) leading to a serious brain injury... yeah nah lol

[@Yonatan24]

And it looks like the cassette is moving along with the wheel - the chain will fall off very fast.

[@kingofstuff1732]

And the idea is already a thing. He didn't make that up. Like around five companies already have patents on things like that.

[@viniciusmmd2282]

And the additional rotational inertia on the wheel... And the cost... And the dynamic behavior of the suspension...

[@meeko._]

Not here to say anything, im your 150th like🤐

[@rainey06au]

@@meeko._ ahah thanks

[@Teshchynskyi]

Это же Харьков, народ! Всем харьковчанам пламенный привет)

[@ОлександрЛініченко-ы8э]

Да, я на момента с парком Горького тоже лёгкий диссонанс поймал)

[@djears]

This is 🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥 All type of bikes should have this .

[@davidlatortsev]

It took him so long to make something that doesn't even work

[@digitalteachers]

it's called invention

[@bobbyhempel1513]

@@digitalteachers it's called something that has already been done and shown not to work. So no this is just stupidity.

[@janhbrenna4264]

@@bobbyhempel1513 so when was the last time you build somthing stupid Just for fun? I find the most stupid experminets the most entertaining ones. :). And you always learn a thing or two from them aswell :)

[@derikclues]

You watched the video didn't you?

[@bobbyhempel1513]

@@janhbrenna4264 if I already know it's a failed design that will only be a waste of time, effort and money I don't do it. I build shit all the time some of it might be considered stupid but it still works.

[@НАХОДКИИЗПРОШЛОГО-о3ц]

При каждом прыжке ударе колесо деформируется и будет печаль!!!

[@ЕвгенПасяйкин]

Да этоже подрастающий эйнштейн :)

[@user-jl4gi7ro8g]

Да и масса велосипеда не слабо увеличилась

[@redialol]

Сделаю вид, что не заметил, как колеса восьмерками идут и им прям хуево

[@timoursharara968]

Он не понимает руский толко англиский потомучто он из США

[@mr.barretm1072]

Сразу заметно что он как будто по рельсам едет

[@СергейСергеев-щ9ц]

Парень не ищет лёгких путей.

[@user-qy6hf7wg9u]

Да затея сомнительная ,недолговечны будут обода и в целом вся мутотень..

[@ivanstef7428]

@@timoursharara968 понемает, видео снимали в Харькове, парк горькова

[@spdskte]

plus when the wheel is deflected from it’s axis it will wedge in the seat or chain stays.

[@scottconger1266]

You get an "A" for effort man, that's how inventions are made.

[@thomashardbattle4287]

No he fucked a rim up

[@alvisdeneldgamle]

it`s how shit inventions

[@another3997]

​@@alvisdeneldgamleYet people laughed when someone suggested keeping a wheel rim "round" by using spokes in tension, not compression. People experiment with things because they want to, because they can...and because it's FUN. Sometimes good things come out of it. For every successful experiment, there are hundreds of failed ones. That's how we learn.

[@jhaylhorrdmacni5980]

The spring can absorb the impact from the ground but you rim cannot survive it

[@xueplet14228]

Во-первых восьмёрка, во-вторых обод от такой амортизации выходит на яйцо, в-третьих ободу пизда от такой конструкции и через неделю он станет треугольным

[@bicycletrust]

илья левачев в-четвёртых достаточно и первых трех)

[@poltergeyst79]

100%

[@xueplet14228]

Предлагаю просто расслабить спицы, один хуй так мягче!

[@АнтонМинаев-э8н]

Дед мне всегда говорил: ненужно изобретать велосипед 😂

[@xueplet14228]

@@АнтонМинаев-э8н мне тоже когда я кастом бмх собирал)

[@AllBrakesNoGas]

Good experiment. It seems to me that the front wheel should have been set the same direction as the rear. A fun idea executed well.

[@philmeisterify]

The chain almost came off when he was riding it.

[@Cakeborb]

That's actually just how chains behave, nothing to do with the (still dumb) shock wheel idea. Watch slow motion mountain biking videos for evidence.

[@enisab4495]

That's called chain slap my boy

[@danielleheiget4517]

Philip Marlow also I believe that was a Shia no tourney rear derailleur which is notoriously bad for dancing around like that.

[@enisab4495]

Danile Leheiget EVERY MOUNTAIN BIKE DOES A CHAIN SLAP no matter the derailleur 🤦‍♂️🤦‍♂️

[@cooperberrysmith7701]

@@enisab4495 not really, anything with a clutch shouldn't slap much at all

[@jacobalstott7122]

We not gonna talk about how he only ever rides it for like 10 secs

[@rhpicayune]

Your derailleur and chain system needs an automatic tensioner to prevent all that slacking when the rear wheel takes a dramatic drop (5:37 , 5:44) you can see the chain sagging greatly; it could jump the gear teeth.

[@Marcelo_Elijah]

noticed it too

[@revico9353]

If those springs are a bit more soft, this will look awesome

[@SuperPussyFinger]

The tires seem to be absorbing most of the shock.

[@dpurwana1270]

The shape of tire wont last long

[@js-ke8uo]

Yup it has several weak points

[@larssmith6780]

don’t you mean the rim?

[@dpurwana1270]

Following the shape

[@Calthecool]

The tire will just hit the frame anyway if you hit a big bump.

[@AthsArt]

The perfect mountain bike

[@danyvaz9422]

Aparecencia ficou top, mais só vendo esses aros tortos já perdi o encanto

[@carnageclan1008]

Its pretty cool but the rim's would definitely break over time.

[@ridgefrost]

I expected this to look and feel like he was riding in a rolls royce

[@zerotoo3583]

Thats the opposite of what hes done

[@mousehi1]

Шов не зачищен, болты пластилиновые, а полезность конструкции вызывает сомнения, особенно заднее колесо. Отчётливо видно, как скачет и виснет цепь при ударе колеса о землю. А есть ли вообще смысл в подобной конструкции?

[@ruariblack]

Concept is interesting but you will probably find your rims will break over time. There is less support is certain areas. Instead of the rim being universally supported it now only has 3 support points. Even through the chain will drop and have some chain slap that is excessive for something that should be helping refuse the forced out through the rider and components. Also he took a lot of force when dropping off the ledge

[@mardefmelmida7783]

Him: touches the braking area of the rotors Cyclist: wait..that's ilegal

[@jadenyork4560]

very illegal

[@sorenoneil3876]

Yes

[@felixbull6738]

As soon as I saw that I just went ballistic

[@giovannilucchetta785]

Gonna report him to tha Bikepolice™

[@crispymtb5741]

Went off my head 👌🏻 Just saw him do it a second time

[@jumpstartrc1571]

I love that people like making these types of projects but just learn how to weld first

[@TheLegokermis]

Exactly what I thought..

[@ratishpatil4582]

Well spoked rim seems to be an advanced tech after seeing this,nice built though

[@sageoz9886]

It's amazing how many inventors bring designs to fruition without researching wether it's been done in the past and why not. This is one example of something that's been tried many, many times by many back-yard inventors and abandoned because it's a bad idea. Really bad idea. Wheels need to be light, because you're spinning rotating mass, so wheel weight is 3x as detrimental to performance as static weight. It's a ton of extra mass to have to accelerate and decelerate up hills. 3 shocks literally doing the work instead of one good one in your fork.

[@hayai_toko7920]

the whole first part is recycled clips from clear bicycle rim

[@Derpuwolf]

I WAS NOT GOING INSANE?

[@tibetje226]

I saw aswell

[@Midnaighte]

I immediately thought that lol

[@s3_slippy746]

Wait didn’t this video come before the invisible bicycle wheels so that video recycled the clips from this video

[@bulletclustrer9160]

@@s3_slippy746 it did

[@maltipoomadness8807]

"You've ruined a perfectly good bike" "Ah, incorrect Marge, two perfectly good bikes."

[@JayantKumarZ]

how two? :o

[@andrecog]

Jayant Kumar we ever figured this out?

[@JayantKumarZ]

@@andrecog nop 😢

[@andrecog]

Jayant Kumar it’s in reference to The Simpsons. Homer said it in one of the episodes

[@JayantKumarZ]

Oh okay. Thanks 😃

[@AviAero123]

Are the welded shock absorber-bearing mounts untrue or is the rim flexing way too much?

[@danielruiz4261]

When he first rhode it and you can tell the bike isnt stable at all while riding, I seriously almost died laughing especially when seeing the slow mos 🤣🤣💀

[@emersonpalheta10]

5:23 It is known that the project did not work. The bicycle is clearly unstable after this project.

[@suhas_shrikant]

This is true

[@ronitmahawar1193]

It's experiment Failure is gain of experience

[@skydivekrazy76]

It would make sense if the outer rim was in three independent pieces to allow shock absorption. Or rename the video "Rube Goldberg rim warping method".

[@martinyoingco8304]

the quality of the video is so good that i thought this was a 5Minute Craft video

[@nikitashkredov8901]

My rims with all spokes are distorted... imagine just being with three shocks...

[@arykleberfernandes]

Pode ser interessante masssss como vai manter a estabilidade da roda?

[@ItsMorbinTime03]

I need to rethink my life after watching this...

[@marcusgamerpro6629]

Filip Koj hahaha

[@vossti]

Your creations are just as interesting as your video production.... Quite imaginative and surreal

[@philtobin9510]

More shock absorption in those tires than the shocks, at least the forks are the right way round this time.

[@thomashardbattle4287]

I know. People shouldn't fuck with their bikes if they don't know that they are doing

[@timfagan816]

When he skids the rear wheel at the end, I think it was accidental, cos his rim is so badly buckled, I think it bent his disk rotor

[@aad1987]

Только варить надо немного потренироваться 😏 И видно,что неровно катит

[@lindaclutterbuck9015]

look at the chain at 5:37 oscillating

[@ControlAltGar]

I can hear that ahah

[@sammcguinness4499]

Jajajaja brutal!

[@toddbertram6556]

Reinventing the wheel is always a good idea. Always good advice. Id taco that wheel on the first 10' drop.

[@borgey1000]

He didn't think about how he was going to true his wheels did he haha

[@KyberGaming47]

At least you know what your talking about bro👌 that'd be impossible if it's welded to the rim😂😂 if the mounts between the ends of shocks and the rim were adjustable it'd be good lol

[@fallenveye]

I literally can see the wheels tilt left and right. That's not good

[@benstv42069]

Just imagine getting speed wobble on this thing!

[@DarkWeaver_03]

Real engineers never look back 🔥🔥🔥