Experimental VTPR aerobatic wing

Рет қаралды 7,570

Күн бұрын

Пікірлер: 33

@michaelwhinnery164 6 ай бұрын

Hay Nick, I've actually cut ailerons into my pug wing. I'm not pleased with it now because I've used very small servos and they double center something horrible. I will be replacing them with the 5 gram servos from anglewings as soon as they're back in stock. Also look into offsetting the servo center on your DLG wing for way more downward travel than up... for the flaps.

@Danburdick-lm5xt 3 ай бұрын

suggestion when cutting thru foam..........make some kind of depth stop on the blade so the blade wont cut down to the table and will stop cutting at a certain depth...........good idea on the foam ribs tho//////////👍👍👍

@EleanorPeterson 6 ай бұрын

If you give a glue-stuck pin a slight twist before pulling it, it'll usually come out without bringing half the model with it. 🙂

@icaroluca41 6 ай бұрын

Always nice to see you in your work shed 🤗🤙🏻🥂

@NickChittyFlying 6 ай бұрын

I tell myself it’s a cabin but you are right it is a shed full off stuff I love ❤️😍😂

@icaroluca41 6 ай бұрын

@@NickChittyFlying cabin is fine four me,🤗🫶🏻my dad had a shed for his rc planes back in the 70' but we are in Italy sice early 80' so this is my English sice I was a kid 😅🤗🤙

@NickChittyFlying 6 ай бұрын

@@icaroluca41 it’s good mate 👌

@richardo212 6 ай бұрын

I had been thinking of making a 'MadSlide' aerobatic glider (Benoit Paysant-Le Roux). Your very timely video gives me new hope of making in mini version from XPS. Brilliant build video. I look forward to watching the maiden flight.

@NickChittyFlying 6 ай бұрын

It was more than I could ever hope for 😍

@richardo212 6 ай бұрын

@@NickChittyFlying Sorry for the supplementary question, Nick, but is your 3mm foam sheet the same as the Diall Polystyrene pack from B&Q?

@NickChittyFlying 6 ай бұрын

@@richardo212 yes mate and I am sure you are right polystyrene more than depron but it comes in 3mm 6 mm 9 mm sheets in a pack Uhu por is perfect

@richardo212 6 ай бұрын

@@NickChittyFlying Many thanks. RIchard

@nandostella9734 6 ай бұрын

I love all of your gliders ❤

@NickChittyFlying 6 ай бұрын

Thanks I actually think this could be special but I could be delusional

@nandostella9734 6 ай бұрын

@@NickChittyFlying no no, I love your approach to various problem they present how you revolve it🤙

@NickChittyFlying 6 ай бұрын

@@nandostella9734 thanks 😍😍

@EleanorPeterson 6 ай бұрын

13:16 - It looks like that aerofoil is upside-down. Is it? 🤔

@NickChittyFlying 6 ай бұрын

All I can confirm is both wings flew bloody brilliantly today on 20 mph 😍

@miket2067 6 ай бұрын

Interesting video, but I'm puzzled by one thing - that two template rib method only works (in my head) on straight tapered wings. How did you do the ribs for the curved wing?

@CeltauraMusic 6 ай бұрын

Cool stuff, Nick!

@NickChittyFlying 6 ай бұрын

Thanks wish I could play my baritone ukulele as well as I can build 🤣🤣🤣🤣 I know practice 😍

@AerialWaviator 6 ай бұрын

Come for the entertainment, and always end up learning something new .. to me. VTPR, or “Voltige Très Près du Relief” in French means “aerobatics very close to the ground” Before a VTPR definition search, was going to suggest that could save some effort by making the wings twisties, aka pitcheron, so no need to make span length cuts and adding extra depron. To remove the clamp marks, might try using a damp cloth with a film covering iron. This technique works well with EPP, but not sure with depron. At least it would give more control than pouring hot water.

@NickChittyFlying 6 ай бұрын

I did exactly that it worked so well it’s worthy of a video 😍 cos that how I straighten the Lidl wing Interestingly I did consider twisty wing but ailerons give advantage of changing the wing section and this might be a long project with these easterly winds 🤪