This is how I got more pressure and volume out of my Explorer 5.0l power steering pump. I don't have any numbers to share. Only that it made a big difference in my steering with the RAM assist and 40" tire's.
Пікірлер: 24
@TnADoStuff Жыл бұрын
Thank you for this! I'm going to have to figure out how to do similar on my Jeep WK pump; it's a bit different than these, but you gave me a starting point!
@jessebarraza60394 ай бұрын
I did this to my F250. Steerings way better when its not moving. The pump is loud now. Lets see how long its lasts. Did ur pump get loud?
@Low_Key_Offroad4 ай бұрын
My pump did not get loud. Is it possible you have air in the system?
@Fordtruckfan89 Жыл бұрын
Ive pulled apart several later 4.0 c3 pumps and they dont have the node sticking out, its a smooth shuttle valve. I imagine they have a smaller hole than these too
@Low_Key_Offroad4 ай бұрын
I have found that the node was on 97 and up as a rule. I think the node is there to limit flow in a stock application.
@johnbaum10003 жыл бұрын
Finally! I hate how stiff my steering is
@Low_Key_Offroad3 жыл бұрын
You won't regret it
@Gloccthejocc Жыл бұрын
Would I be able to achieve the same with a reducer on a smaller hose. I’m lookin to put in a power steering cooler. But it’s a 5/16 fitting not the standard 3/8. What’s ur thoughts
@arontesfay25202 жыл бұрын
Can I do this without removing the pump and/or draining the PS fluid?
@justaboutsound2 жыл бұрын
Hi can you help me getting my power steering pump modified. I want it to be 25% more lighter.
@Fordtruckfan89 Жыл бұрын
Question on a stock application my explorer has a new rack and pinion, reman pump, steering assist is lacking at idle, would just removing the restrictor nipple keep the pressure the pressure the same but help with the lack of flow? Not trying to blow out a new steering rack from excess pressure.
@Low_Key_Offroad Жыл бұрын
I'm not exactly sure. It couldn't hurt it. You may consider putting an underdrive pulley on it to make the pump spin faster at an idle
@Fordtruckfan89 Жыл бұрын
Any idea where I can get one?
@Low_Key_Offroad4 ай бұрын
@@Fordtruckfan89 Driven auto is where I got mine.
@randumadventures3 жыл бұрын
So a year later is there any down side to this mod or still working good?
@Low_Key_Offroad3 жыл бұрын
It all works great. Runs by Ram assist well.
@CorkscrewTrail17 күн бұрын
Two of them I’ve done this to are still going strong. I’m going to build a larger reservoir to lessen the cavitation to the system since I’ve added hydroboost and 35” tires to the load.
@rcazarez134 жыл бұрын
I have a 5.0 from a explorer and a crown vic front clip. The steering is kind of hard you think this may solve my problem?
@Low_Key_Offroad4 жыл бұрын
Yes it will.
@rcazarez134 жыл бұрын
@@Low_Key_Offroad Thank you
@VileMisanthropy Жыл бұрын
How did ypu get the shuttle valve out, Mines stuck.
@Low_Key_Offroad Жыл бұрын
You should be able to pop it out fairly easy with a small punch. Not sure why yours is stuck.
@VileMisanthropy Жыл бұрын
@Low_Key_Offroad honestly, I think its the "reman" pumps I'm getting, there rust residue inside. I did get it out through the bottom with a punch, shouldn't these move freely?