Extension Table for Dewalt DWE7491RS

[@myRefuge3710]

Why am I just seeing this 3 years later, "POST COVID!" Really, really rad. Great work.

[@caseybrett7016]

I should have left a comment 2 years ago when I built these. Thank you so much for sharing. I took my time to build these table extensions and an outfeed table. It’s like I have a cabinet saw now. Thank you so much. Great work!👍🏻⭐️👏🏼

[@kliyde]

I got lucky I was going to work on a different plan before I came across your video. Perfect timing... Perfect plan for me... Thank you.,.

[@LORENIFFT68]

Excellent design. Elegant in its simplicity and function. If I get more room in my shop I’m doing exactly this design.

[@Love4raine]

I am MOST DEFINITELY BUILDING THIS !!! I love this idea !!!! It’s beautiful and sturdy and EASILY removable to put away. Thank you so very much. I also went to your measurements link for the table. Thank you again for your time to show us your idea.

[@Spratlyk9]

Thank you, Im glad you liked it! Good luck on your build!

[@funnyharleyman]

I have this exact table, where did you see the measurement link?

[@NonNone-qm4zi]

I am doing something similar for my Bosch table saw, except I am adding an outfeed table and my extensions will be attached with folding shelf brackets.

[@billr4283]

I built mine this week. It is slightly modified as I add rivet nuts to the saw frame to stabilize the wing extensions. But the primarily idea is all yours. Thank you!

[@TheWarrior831]

You sir are a GENIUS! I am so inspired. If you put a router insert on one of those wings. It would be even better.

[@Spratlyk9]

yes, I can put a router on one of the extension wing, but I already have a designated router table, so I don't have to do it. Thanks for watching!

[@DickinsonR]

This is great. Thanks so much for figuring this out and sharing your work.

[@xHMProductionx]

The question is, why didn't I think of this?! Great work! I will be making some.

[@ajmcdonald8939]

Amazing...I have been searching for a good way to make extentions for about a month now. I have the same saw. I want to thank you for sharing your video. The extentions are perfect. Very well done design and video. Thank you again.!!!

[@Spratlyk9]

Im glad it helps. Thanks for watching!

[@qmoonwalker3847]

Wow!!! This is awesome! I have limited space. That’s why I bought this table saw. This solves a lot of problems! Thank you so much for the great idea! You are a rock star sir!!!

[@m3mikec]

Should sell a complete build along video with plans! People would buy it, there’s millions of these saw being used. For me and another commenter said it(when I have more room I’m building it)!! Cheers

[@toneightO]

wow. this is nicely done! great job. you should sell these.

[@leiferickson3183]

Really nice addition to that saw!

[@Peyton-rv1qe]

Very nice design. You earned my subscribe push. I will start on this very soon!

[@Spratlyk9]

Thank You!

[@whutdidhesay]

I am most interested in the outfeed table you made. It shows in the first couple seconds of the video. Any information you can provide on that?

[@dirtfpv]

Damn, I love this. Badly needed for when cutting 4x8 sheets.

[@Bustermachine]

that is brilliant and only needs to be combined with some way to expand the intake and outfeed to create the perfect small shop saw.

[@algorithmicalychallenged.291]

Smart...wish you would do a build video.

[@ronhau1542]

I’ve got to do this!!! Great work!

[@bobroybal4785]

Thank you for video it was so helpful!

[@micahjdiamond]

I would buy some of these from you also!

[@st7650]

Wow this is so amazing something DEWALT should have offered

[@95993harpo]

At the start of the video you show an outfeed table. Can you tell me how you mounted it?

[@InsiderCarpentry]

That's slick!!!

[@nelsonway1869]

Impressive...like the way you think...thank you for sharing.

[@dreamlookautodetailingauto3353]

Very nicely done.👌 Thanks for sharing 👍.

[@TonyaDLewis]

Can you make this for me and ship to houston, texas please? How much do you charge, i need asap.

[@mikedtubey]

Excellent work, i have the same saw i will do what you did! Thanks!!!

[@Spratlyk9]

Thanks you, and enjoy working on your projects!

[@dwen5065]

Great approach. Thanks for sharing.

[@BrandonCabanillas]

Do you have pdf plans?

[@bijan4727]

Excellence job. I love it.

[@david5132-t2u]

Brilliant job on this

[@mikeroth5536]

Thanx for the help bro.

[@mikepucser6821]

Great idea! do you have any actual dimensions or plans that you can share with us?

[@Spratlyk9]

Click the link below, this might help. Thanks! kzbin.info/www/bejne/npOUaouloM98hrc

[@BigDaddyRob1309]

I would purchase as well. Let me know if this is something you sell. Great video! I love your ingenuity!!

[@Spratlyk9]

I did shipped one to New York but the shipping cost is way too much! If you're from California, maybe we can work something out.

[@blkgsr02]

@@Spratlyk9 I am in Orange County. How can I contact you to order one?

[@Spratlyk9]

@@blkgsr02 We're pretty close distance to each other. I'm near the Hawaiian Gardens Casino area via 605 fwy.

[@blkgsr02]

@@Spratlyk9 how can I order one from you?

[@Spratlyk9]

@@blkgsr02 I can build one for you. If you have a messenger, maybe we can communicate there.

[@dougmilton7409]

What paint did you use on the extensions?

[@Spratlyk9]

I dont remember the brand but i just randomly pick a similar color like that of Dewalt, and had the paint guy mix it for me. BTW I bought it at Lowes.

[@dougmilton7409]

@@Spratlyk9 thanks

[@davidjohnson-ou7yx]

I am very munch interested in this extension cable. I am willing to buy one from you, if you are making them. Please advise. How can i get hold of you. dave

[@Spratlyk9]

I live in Southern California. In what state do you live?

[@davidjohnson-ou7yx]

Michigan, I am willing to pay the postage etc.

[@Lugenfabrik]

You seem to have an extra long rail that rides along the rack and pinion track. Where’d you get that?

[@Spratlyk9]

No, that is the original rail. I did not replace it.

[@Husky.Dude.]

nice mod! what color did you use to match the dewalt table?

[@Spratlyk9]

I just picked and chose a color sample at the Lowes paint department and compare it to the Table saw display. Once I got it matched, they mixed it for me.

[@davidstrand5589]

Please could you give me the mix numbers for the grey and yellow. Looks factory. Love it.

[@Unkebe]

Great job, can you tell me where you found the paint for your extensions

[@Spratlyk9]

i bought the paint at Lowes.

[@davidstrand5589]

@@Spratlyk9 Could you tell me the name and brand of the paint.

[@davidstrand5589]

Please tell us more about the paint. Very interested in the color. I've tried a couple of times to match Dewalt grey and yellow but failed. Any help would be greatly appreciated.

[@Spratlyk9]

@@davidstrand5589 it's been a long while and i cannot remember the brand of paint I used. But I picked it from Lowes paint department; i picked the sample paint brought it to the Dewalt tool display, and match it.

[@goldfamily6852]

The best ka kabayan!

[@markwhite6018]

Did you by any chance make plans for these?

[@Spratlyk9]

No, I did not make any plans, i just measure and cut the necessary parts as I progressed. It's easy though, But it definitely works! I've tried cutting half sheet of plywood on it with not problem.

[@liddell98]

Great job!

[@brandonvidal8300]

That’s legit, I’m in the process of something similar for my 8-1/4”.

[@flyingd217]

Love it! Tell the dog to take a hike

[@ecaff9515]

Excellent

[@eversonl6724]

Fantastic ideas & Well done sir!

[@insensitivedriver8224]

If we ever meet, I owe you a beer, sir…

[@burnsm2012]

Are u selling these if so take my money

[@mymate18]

This is super... thank you subscribed :)

[@Spratlyk9]

Thank you!

[@goodboyringo9716]

Dewalt should sell extensions for this table

[@youtrades]

Nice!

[@VillainCollector1]

Genius

[@abdultairu]

Wonders why DeWalt cannot think of this first, you beta them man!

[@dytch7243]

Build some more and I will buy from you! 👍

[@Spratlyk9]

I'm actually building another one right now.

[@rakeshbhansali4907]

I will buy this from you too. Let me know if you are selling these

[@Spratlyk9]

@@rakeshbhansali4907 What state or city are you at? I'm from LA.

[@rakeshbhansali4907]

Spratlyk9 I’m from Houston.

[@rakeshbhansali4907]

Spratlyk9 if you could just let us know the exact measurements that would really help? I have the same table saw and I don’t and want to have a bigger and too expensive saw like saw stop as a hobby saw?

[@bradmorris3942]

Nice modifications

[@Spratlyk9]

Thanks!

[@ecaff9515]

Excellent