25 cal Huben GK1 with Truglo Reddot shooting JSB 25.39 grn pellets at 100 and 200 yards at 800 fps.
Пікірлер: 69
@arcticairgunner Жыл бұрын
Incredible! I can't wait to get mine Grateful for every video of the GK1 you share 👍
@Boom.Strike Жыл бұрын
I did try for the can at 200 yards but was unsuccessful, i was by myself out there and had not spotter to see if i was getting close, my holdover was like 10 ft.
@gman-dq5jn8 ай бұрын
Sounds like Michael Myers with that breathing
@arturpapiernik7008 ай бұрын
Super 👍
@Relaxbadkneeadventures Жыл бұрын
Niceeeee respect 👍😉
@mogamedfakier3592 Жыл бұрын
Awesome that pistol is definitely in a league of it's own I always wanted the rifle but now I'm leaning more towards the Gk1
@thehaze197211 ай бұрын
I will soon have both! B-)
@mogamedfakier359211 ай бұрын
@@thehaze1972 lekker jy👍
@2c-BA Жыл бұрын
Wow, excellent shooting! What ldc you have on it? I really enjoy your videos, keep-em coming.
@Boom.Strike Жыл бұрын
The moderator is a 75mm shorty that i printed, im also testing vent holes on to to help reduce muzzle flip. Its not super quiet but ot does take the bark out and i dont need to use hearing pro.
@johnnybbgunner2136 Жыл бұрын
Very nice shooting at 100 yards!🤠
@myfalconry763 ай бұрын
The time from the shot to the impact is way off that’s like 25 yards and 50 you view of the range was done at 50 and 100 everything looks father on video scammer
@christosmavrommatis9129 ай бұрын
This pistol cannot shoot 200 yrd off hand, with a red dot this kind of grouping with pellets. You need slugs, a magnifying optic, a spotter and a bag rest. I have the pistol, I have the trainning (10m target pistol), I have the equipment and the ammo needed, I have shot over 5000 round and I think your video is false because no speciffics are given.
@shabeermusthafagasee9 ай бұрын
How could you see so far down without a scope...100 yards is hard enough let alone 200.not possible.
@Boom.Strike9 ай бұрын
It was a 10 or 12 inch target , I definitely could see it and even make out the soda can, I was holding over about 10 ft for the shots, definitely some luck involved I'm sure. Soda can shots were unsuccessful. Maybe a spotter next time.
@rogerlikes Жыл бұрын
Great shooting man.
@johnnybbgunner21364 ай бұрын
Just the fact that it is accurate at 100 yards was good enough for me.🤠🇺🇸
@Boom.Strike4 ай бұрын
Ya, its definitely not a precision long range beast but definitely very accurate to 100 yards
@arekpetrosian49655 ай бұрын
That is some DAMN fine shooting. Thank you for sharing with us.
@Erebus.666.10 ай бұрын
Off hand means firing with the non dominant hand. Don't think it qualifies when using both hands. Good shooting from standing though.👍
@Boom.Strike10 ай бұрын
Thanks, my meaning of "off hand ) was unsupported shooting (no rest)
@genuinetuffguy185411 ай бұрын
Amazing air pistol and the shooter has amazing accuracy. For an air pistol to be effective at 100 yards is super impressive.
@patbournes528111 ай бұрын
Great shooting !!!
@arbythepainter6 ай бұрын
awesome shootin tex.
@julieoliver81702 ай бұрын
How much head room were you giving each distance. You must have been doing a lot of shots to get the amount of drop off in advance.
@Boom.Strike2 ай бұрын
100 yard I just knew the holdover, it's about 9 inches, 200 yards I bag rested the gun till I seen it hit the orange fence it was just a few shots,then just went for it, holdover was about 10ft or about halfway up the trees in the background, probably luck involved but I have hit targets at the distance a few times recently, im still looking for the appropriate fitting slugs then I'll try for a soda can at 200.
@alanspring84622 ай бұрын
Happy to subscribe, my friend.
@Boom.Strike2 ай бұрын
Thanks
@thehaze197211 ай бұрын
Impressive shooting! Be fun to start testing it when it arrives, hopefully in a week or two. :-)
@PETRAKOV16 ай бұрын
Try 200y with slugs,please
@michaelpurdy59084 ай бұрын
I know it hits at least 50 fpe at 100 I wonder what it carries at 200.
@Boom.Strike4 ай бұрын
Well, enough to totally flatten pellets 😁
@undeadaeon99924 ай бұрын
The power can be adjusted to 87fpe.
@michaelpurdy59084 ай бұрын
@@undeadaeon9992 no I mean at 100 yards it still carries enough energy to blow right through 3/4 inch pine boards.
@dynomike117 ай бұрын
Extremely impressive, and nice views plus sound!! What is the brand/model of the LED indicator attached to the back of the steel plate?
@Boom.Strike7 ай бұрын
Thanks, light is a Caldwell Flashbang, only about $30 and works very well and can even take a few direct hits and keep working.
@thegiantswordworkout7 ай бұрын
What calibur? 22 or 25
@fightclub576911 ай бұрын
Crack shot bud
@Boom.Strike11 ай бұрын
Thanks, im sure its a little bit me but the pistol is Superb.
@stewy141211 ай бұрын
Are you the one who made the mounting rmr mounting plate and loading gate and fill port plug?
@Boom.Strike11 ай бұрын
Nope,I seen something like that on Airgun Nation forum though .
@stewy141211 ай бұрын
Yea, I just traded a guy who 3d prints some good quality accessories for this air pistol
@Narwhal3510 ай бұрын
hello! Good video! What is your led target please ?
@Boom.Strike10 ай бұрын
The flashing target a Caldwell Flashbang, it was only around $30 and are very bright and can take a few direct hits to the leds and still have others work. I highly recommend.
@justinhromek73 Жыл бұрын
I just bought a cabelas pellet trap for this pistol. Blew out the back of it in 6 shots….and that’s with it turned down to 750-800fps. I gotta find a better trap! Thanks for posting the vids, fun to watch
@Boom.Strike Жыл бұрын
You probably need a rimfire trap or just make your own
@Boom.Strike Жыл бұрын
All my targets i shoot are rimfire or above rated , most are 1/4 AR500 steel ,nice ring to them.
@justinhromek73 Жыл бұрын
@@Boom.Strike ok I’ll get one rated for rimfire, thanks! yeah you have a nice range to shoot at too, I’m jealous. You are getting pretty damn good off hand!
@julesgardet65910 ай бұрын
Wow… You are the perfect match for that gun.
@Boom.Strike9 ай бұрын
Thanks, it felt right at home the first time I held it. It's definitely in a league of its own.
@papaonthego507911 ай бұрын
What muzzle muffler you have on that .25?
@Boom.Strike11 ай бұрын
A 3 inch long custom 3D printed with muzzle break ports , that i made and testing , its not silent but it definitely takes out the bark and im playing with different size and shape ports to try and keep the muzzle flip to a minimum.
@papaonthego507911 ай бұрын
@@Boom.Strike good shooting, I think I may pull the trigger and get a .25 cal. What size tank are you using for refills?
@Boom.Strike11 ай бұрын
@@papaonthego5079 my tanks are 74 cu ft, good for about 1000 shots or so.
@diontaehickmond9314 Жыл бұрын
Could this be a self defense tool
@Doobie603 Жыл бұрын
I say yes, I have seen people getting over 80 fpe out of it! Comparable to what you get with .22 LR and that ammo has "done the job" many many times. I have a friend who owns a dispensary who is looking into this gun for self defense because he can't have a gun due to the cannabis.
@diontaehickmond9314 Жыл бұрын
@@Doobie603 ok that definitely gives me some clarity on it , have you seen the hp max 50 cal , would you go for that or this ! …. I’m torn between the two honestly
@Doobie603 Жыл бұрын
@@diontaehickmond9314 I personally would want the Huben GK1 because it is more of a pistol and the Max is really getting close to carbine size, I am on a farm and I am gonna use it for pesting small animals and putting animals fown for slaughter. If I was gonna use it for hunting or if I had larger pest like coyotes I would lean towards the crazy power of the HP (over 300 fpe I heard for about 4 shots). The Huben will kill a coyote with a well placed shot but that .50 will just plain kill it with just about any shot. So it really depends on what you use it for. I think they are coming out with an aftermarket stock for the Huben so you can use it as a carbine also. The magazine capacity is way different too the Huben has 19 mag and the HP Max has a 6 shot mag for obvious reasons lol. HP max goes up to 4500 psi and Huben goes to 5000 psi so with the Huben you will need to have a compressor that goea up that high to get everything out of it, I think alot of them obly go to 4500 psi. lots to think about....
@rondorland998710 ай бұрын
Hello, would you tell me please witch red dot sight you used?
@Boom.Strike10 ай бұрын
Truglo tru tac micro and a Monstrum ruger 10/22 mount, i have a video on here with basic installation and details in the description.
@rondorland99879 ай бұрын
Thank you very much. i saw your video. I'm sorry but my English is not so good. Can you tell me were i can purchase the same moderation you used? Kind regards, Ron from the Netherlands.
@Boom.Strike9 ай бұрын
@@rondorland9987 hi, it is custom 3D printed suppressor i made but im not currently selling any. It was a modified free design from Thingiverse 3D site.
@Boom.Strike9 ай бұрын
Truglo tru tac micro, and a Monstrum ruger 10/22 mount bought bon Amazon. I do have a basic installation video and description of parts on KZbin