A vanishingly rare example of somebody using their stepladder in the correct orientation. Well done. Nice work.
@Mobileblaster6 ай бұрын
😊👌👍 it's very hard to blast side ways on the kick back presure would certainly be enough to topple me over 😂
@chriseccles14546 ай бұрын
I noticed that, possibly a board needed if that lawn was soft.
@Mobileblaster6 ай бұрын
@chriseccles1454 I like to stamp on the bottom tread just to make sure it's not going to move or sometimes bounce on the bottom run it's abit like a habit that I do. I know working off ladders is dangerous but it's like second nature doing stuff I don't even know why I do it 😂 it's like a sense I've got haha
@chriseccles14546 ай бұрын
@@MobileblasterStaying safe sometimes becomes second nature but you can also become complacent it's an acquired balance .
@Mobileblaster6 ай бұрын
@chriseccles1454 yeah definitely and when your concentration is on what your doing its easy to have stupid errors 🫣
@ottochristensen48416 ай бұрын
It is incredibly relaxing to watch the fine masonry being revived.
@Mobileblaster6 ай бұрын
😊👌👍
@larrysorenson47896 ай бұрын
Destroyed
@HughzieTube6 ай бұрын
Painting brickwork is a fatal mistake. Once you do it, you are committed to redoing it every 5-10 years as it never lasts.
@Mobileblaster6 ай бұрын
Also some people don't realise when painting it needs to be masonry paint not any old crap as it needs to be able to breathe 😊👌👍
@martinogold6 ай бұрын
Yep. Why introduce a maintenance issue when you don't have to?
@catabaticanabatic38006 ай бұрын
Paint has destroyed more houses in Britain than the Luftwaffe ever did.
@markat95766 ай бұрын
@@martinogoldPossibly to cover up graffiti?
@Mobileblaster6 ай бұрын
@@martinogold that's my thoughts 👍
@markbrooke41006 ай бұрын
Nice work, what ever possessed us to start painting brick work 😮
@Mobileblaster6 ай бұрын
😂👌👍
@ringstinga6 ай бұрын
What a difference that makes ! Nice 1 again Mick.
@Mobileblaster6 ай бұрын
😊👌👍
@Alan_AB6 ай бұрын
Moaners are always gonna moan anyway. You did a brilliant job. Dwelling is looking 100 times better already.
@Mobileblaster6 ай бұрын
😊👌👍
@randydobson18636 ай бұрын
hello Mick & it's is Randy and i like yours video is cool & Thanks Mick & Friends Randy
@Mobileblaster6 ай бұрын
😊👌👍
@philglover29736 ай бұрын
Awesome job Mick very much appreciated 🇬🇧🇬🇧🇺🇲🇺🇲👍😎🤠
@Mobileblaster6 ай бұрын
Thanks mate 😊👌👍
@johnmangan62406 ай бұрын
I always respect your work and your pride in the result. Always a thumbs up from here in Aus. Loved the intro driving down wet small English country roads. A real trip gown memory lane.
@Mobileblaster6 ай бұрын
Haha its funny you say that my mate in new South Wales AUS mentioned he loves to see the green countryside so I put a extra long clip in for him glad you enjoyed it too 😀 👍
@ma.creations206 ай бұрын
Cracking job that Mick , a dab hand with that blaster 👍
@Mobileblaster6 ай бұрын
😊👌👍
@ma.creations206 ай бұрын
@@Mobileblaster just in the process of uploading my first every cooking video
@Mobileblaster6 ай бұрын
@@ma.creations20 oh cool 😎 👌 good luck it takes some time for the algorithm to pick videos up so stick with it if you enjoy making them it will pay off 👌👍
@WombleUK6 ай бұрын
Woo Hoo!!! First comment LOL Looking forward to this transformation, but you messing with my OCD by leaving paint on that air-brick though Mick
@Mobileblaster6 ай бұрын
😂 they was getting replaced 👌👍
@richardgraham11676 ай бұрын
Was the white paint checked for lead content prior to its dispersal about the property? Results looks great.
@Mobileblaster6 ай бұрын
I don't show alot of whats going off in these videos the not a how too 👌👍 but for your query yes I did test for lead what you didn't see also was the asbestos that was removed too prior 👌👍
@richardgraham11676 ай бұрын
@@Mobileblaster Thanks for the update. My old 1920's clapboard Craftsman Cottage house here in California is loaded with lead paint over the redwood, so sandblasting wouldn't be practical, I'd have to heat and scrape every inch of the exterior in order to remove the multiple paint layers.
@Mobileblaster6 ай бұрын
@richardgraham1167 it's very unusual to have any lead on most projects as it's been banned since the 60s I always check on the older properties. It can be blasted with no problem so long as steps are taken. I have insurance-approved asbestos removal ticket if i needed lead tickets it won't be too hard to adapt my system to work with all the appropriate authorities 👌👍
@Ian-s5i6 ай бұрын
Another day another good job mate looks good!!
@Mobileblaster6 ай бұрын
😊👌👍
@jodirauth88474 ай бұрын
That machine is a beast. Gorgeous house after you removed all that paint.
@Mobileblaster4 ай бұрын
😊👌👍
@karenheartoriginal37836 ай бұрын
OMGosh! I am so excited to have just found your channel...am a new subscriber. This home turned out extraordinarily beautiful. I grew up in a red brick home that was never painted and loved it. Look forward to watching many of your old posts as well as all of your news one coming up! 👏👏👏💯💯👏👏👏
@Mobileblaster6 ай бұрын
Thank you 😊 what a lovely comment 😊 👌👍
@phenogen81256 ай бұрын
Great job Mick. Huge improvement.Note the correct colouring of mortar on the extension to match the brick which continued for the re-point should improve aesthetic further .
@Mobileblaster6 ай бұрын
Oh it will look 100x better when it's jointed up properly 👌👍
@scottkenzig51446 ай бұрын
Nice job 👏 👍. Green country side 👌.
@Mobileblaster6 ай бұрын
I put the extra bit of driving in just for you 😎 skinny little roads 😂👌👍
@Kevin-is-here6 ай бұрын
Nice satisfying time lapse
@Mobileblaster6 ай бұрын
😊👌👍
@chriseccles14546 ай бұрын
Nicely done 🎉🎉😊
@Mobileblaster6 ай бұрын
Thank you 😊 👌 👍
@wolfie8546 ай бұрын
Nice job, well done
@Mobileblaster6 ай бұрын
😊👌👍
@ScratchyBaws6 ай бұрын
Bloody hell, amazing job and transformation. 👍
@Mobileblaster6 ай бұрын
Thank you 😊 👌👍
@chazzlebazzle696 ай бұрын
Fell asleep first time....very therapeutic
@Mobileblaster6 ай бұрын
😊👌👍
@SonofChurchill6 ай бұрын
good see the PSI didn't know was so low. 😎 Place looks good and the clean up spotless
@Mobileblaster6 ай бұрын
Yeah alot of stuff isn't seen in these videos because what works for me may course alot of damage for people that want to learn from these videos I'm far from an expert or a teacher so I try not to add this info 😬😊😂
@mcmullg6 ай бұрын
Looks a load better with the red brick! 👏
@Mobileblaster6 ай бұрын
Yep that's my thoughts too. 😊👌👍
@christinekesler89646 ай бұрын
Looks so nice 🙂
@Mobileblaster6 ай бұрын
😊👌👍
@ceedaddy6 ай бұрын
Give it a Nice touch of Tuckpointing...and that house will look brand new !!!!
@Mobileblaster6 ай бұрын
That's the next job they was on with 😊👌👍
@eppot16 ай бұрын
Thums upp !!! looks nice !!
@Mobileblaster6 ай бұрын
😊👌👍
@martinogold6 ай бұрын
Good job!!!
@Mobileblaster6 ай бұрын
😊👌👍
@dignitas19806 ай бұрын
WOW! What type/model of wet sandblaster do you use?
@Mobileblaster6 ай бұрын
Any dry presure pot and inject water into the nosel keep things simple 👌 👍
@julianchambers83726 ай бұрын
Ayup Mick good job. Is your compressor ok now.? Do charge by the hour or job or by the square mt.
@Mobileblaster6 ай бұрын
👋 thanks 👌 😊 yeah I could do with a better cooling system for the aftercooler but it's working for now its likely to need a better fan when the weather picks up 😎 experience is how I know how much things is going to cost me then I add my labour 👌👍
@WombleUK6 ай бұрын
Haha yeah you said at the end of the video. I had a feeling that was going to be the case, same with the joints when you leave the as they going to be repointed.
@Mobileblaster6 ай бұрын
😊👌👍
@tysonandrewmcculloch3 ай бұрын
It is hard to see, but how do you protect the fireskin of the brick from being destroyed by the blasting? Or is that sacrificed?
@Mobileblaster3 ай бұрын
Fire skin? Do you mean the glaze?
@JanicePutt3 ай бұрын
Would it need re-pointing afterwards?
@Mobileblaster3 ай бұрын
It only needs replacing if it's no good to start with this job the cement was in poor condition and they did grind and point it up I have completed job photos on my community tap on my channel 😊👌👍
@vipulpd20085 ай бұрын
Just asking pressure wash on old brick wall to remove paint will not cause sepage issue?
@Mobileblaster5 ай бұрын
This isn't pressure as such it's only 125psi the water is only for dust suppression it'd the media doing the work 👍
@charleswelch2496 ай бұрын
That's a lot better than the ugly paint on the beautiful brick and stone work. Never understand why you would paint bricks and stones. You do amazing work.
@Mobileblaster6 ай бұрын
😊👌👍
@Wolveslandscaper6 ай бұрын
New sub here that's a big difference it looks so much better already when his hade it repointed and new grates it will look a million pounds
@Mobileblaster6 ай бұрын
Definitely should like like a new build 😊👌👍
@MuddyPigg6 ай бұрын
I wonder if removing the paint helps the house to breathe better? Moisture wise?
@Mobileblaster6 ай бұрын
It's a possibility but I think they had this done so for the look no issues of damp 👍
@chrisrobinson201Ай бұрын
I wanna have a go haha
@MobileblasterАй бұрын
😎
@kubinka8796 ай бұрын
Great to see stepladder being used correctly, not sid3 on.
@Mobileblaster6 ай бұрын
😏 it would blow me and the ladder over side ways on 😎👌👍
@AMP746 ай бұрын
I suppose, now all bricks require a good protection since the blasting removes the slick surface and opens pores?
@Mobileblaster6 ай бұрын
No just re point and it will be like a new build 👍 blasting won't make a 4" clay brick a sponge its still a 4" clay brick 👌👍
@clivewilliams36616 ай бұрын
This is a very risky process. In the first instance I would strongly recommend that a full condition survey is carried out, including moisture readings to all the internal faces of the external walls and ceilings, which will be the basis of assessing any water penetration and damage. Traditional standard British construction has evolved to cope with rain falling out of the sky and not a pressure washing with c2000psi jets, whether on not sand is mixed in. I would be concerned that the brick facings have been eroded that will considerably shorten the life of the brickwork. As indicated, all the brickwork will require raking out and repointing, making the on-costs considerably more than the jet and water/sand blasting. I don't see any obvious signs that the cavity has been insulated, but if so the pressure washing will have soaked the insulation that will dry out to both the inside and outside over a protracted period. There was probably a reason for painting the walls in the first place and most of the time its in the vain attempt to cure a penetrating damp problem - that hasn't gone away but will be highlighted by pressure washing. If the intent was to improve the aesthetics then I would have considered overcladding with render or an actual,cladding system, which would have given the opportunity to add insulation.
@Mobileblaster6 ай бұрын
It's a good job I was only at 45psi not 2000psi a jet wash is aprox 10L per minute I'm at 0.4L per minute sometimes less. The right media water psi and pitch won't harm a 4" clay brick it will still perform just like a new brick. The reason for the job was because the joints had failed and cleaning the bricks beforehand go hand in hand for a perfect newbuild luck. It has insulation and if that's been done by a reputable company it will be fiberglass none absorbent like all insulation companies use so that's not a problem. The reason was for astatics but your wrong about the paint if it's not approved for brick the it's like putting a bag on the house it need to breath 4" clay bricks are designed to repel water aswell as weep damp out. If you have any other questions I'm happy to put your querys straight 👌👍
@Secession19006 ай бұрын
Please tell us what abrasive and what grit size you used on this job.
@Mobileblaster6 ай бұрын
Crushed glass and my own blend not something that can but bought off the shelf. I buy in bulk from the quarry this enables me to tell them what I want. 👌👍
@ukmud62186 ай бұрын
What area do you cover?
@Mobileblaster6 ай бұрын
Yorkshire and the surrounding areas depending on the job 👍
@incorrect18446 ай бұрын
Shoutout to the gutter man who put clips every 500mm 😂
@Mobileblaster6 ай бұрын
😂👌👍
@adrianking63096 ай бұрын
What would be the average cost for this to be done on a bungalow?
@Mobileblaster6 ай бұрын
For Business Enquiries Please Email Info@MobileBlasting.co.uk Regards Mick
@Dennis_J._Aitken5 ай бұрын
It doesn't look like you are using any medium just very high pressure water OR am I missing something?
@Mobileblaster5 ай бұрын
Low pressure media and water is only added to suppress the dust 👍
@njuham6 ай бұрын
People started to paint, or render, bungalows because they thought red or yellow brick looked old-fashioned. Rendered walls show any dirty stripe from the leaking guttering, just looking at my neighbour's bungalow now.
@Mobileblaster6 ай бұрын
😊 that's also something I can clean with ease get them to contact a specialist before painting any professional cleaning company love that sort of work but its far between because people think over painting is the answer 😏👌👍
@Steve-j7z2 ай бұрын
Always good to see the hard glaze of the brick removed to allow the water in 😂
@Mobileblaster2 ай бұрын
Removing a microscopic layer off a 4" clay brick isn't going to affect a 4" clay brick. The outer layer of a brick is for decoration not to stop it from being a sponge.
@Steve-j7z2 ай бұрын
@@Mobileblaster bricks aren't fired in kilns as long as they used to be. Plus to take the paint off that quick it's got to be taking some of the brick surface away as you can see in the red waste water and slurry. Reckon it's a fine line between doing it right or messing the brick so it spalls later.
@Mobileblaster2 ай бұрын
Red waste? How do you know that's not the waste media? look, if you're a blaster and want to pull my work that's fine but you're not filling me with confidence with your knowledge. If you're not a blaster, I can reassure you that a 4" clay brick will not turn into a sponge after removing a microscopic layer off the face. Blasting is abrasive, yes but I have the ability to remove paint off a coke can or profile stainless steel ready for rubber Linings. The speed of the job is all down to the equipment and knowledge needed to operate it at its full potential. If I turned up with a rig that's got no power and takes me 10x as long, does that mean you are getting a better job? Or you're getting ripped off by a cowboy?
@Steve-j7z2 ай бұрын
@@Mobileblaster all I'm going by is what I can see on the video, I'm not knocking your work just saying it must be a fine line between messing the brick up getting the job done in a reasonable time. If the red waste is from whatever grit is in with the water maybe you should point it out in the videos otherwise it just looks like it's from the brick. It obviously looks a thousand times better after blasting but if that's at the sake of the brick then not for me.
@Mobileblaster2 ай бұрын
@user-yh7un3sz7v It isn't for everyone the owner of this house tried chemicals and the doff plus falch (like a doff but 5x more powerful) without any success they were at the end of the line without knowing how to get the paint removed rendering company turned it down until the paint was removed so it was a matter of blasting or live with damp. As mentioned it is abrasive and it does remove a microscopic layer off the face this does not affect the way the brick performs in any way when it comes to repelling weather and also weeping condensation out. When it's the only option left and someone like me says I can remove it and you won't need to do anything else ie render etc if the cement is good to start with but in most cases, repointing will need doing after blasting as said if it was good cement then I cannot remove it so no more work would need doing if that's good 👍 I appreciate constructive criticism filming for KZbin is a secondary thought I would love to remember to say everything I need to it's not doable as KZbin is a lot harder than 1 would think especially when I've got my brain in gear for the job 👌👍
@donalfinn42056 ай бұрын
What’s all this driving to the job to do with sand blasting?
@Mobileblaster6 ай бұрын
I'm a mobile blaster I wouldn't be very mobile without it 😏😂
@chrisccb6 ай бұрын
17:48 flatearthers just left the chat 😂
@Mobileblaster6 ай бұрын
😂
@TheParerajeanmichel6 ай бұрын
magnifique.
@Mobileblaster6 ай бұрын
Thankyou 😊 👌 👍
@larrysorenson47896 ай бұрын
Fired brick has a hard exterior face. It provides a waterproof surface. The interior material is softer. Sandblasting can remove that surface and expose the softer material to weathering. Sandblasting will remove the structural mortar. This then requires laborious hand repointing of all the joints. Sandblasting is a really bad idea. Chemical stripping is best but far more expensive.
@Mobileblaster6 ай бұрын
4" clay brick is still a 4" clay brick after blasting I can 100% guarantee it won't turn into a sponge and it will still perform like a new brick yes it will change the appearance but it's better then painted brick? Can I ask what makes you an expert ?? Because from my experience what your saying is wrong about everything else
@TXH11386 ай бұрын
Looks much better but still needs some character. Maybe some shutters and landscaping.
@Mobileblaster6 ай бұрын
The owner has text they have it ground out ready for repointing they definitely not dragging the feet with this project 😊👌👍
@chaika83.5 ай бұрын
Здравствуйте. А кто подрезает кусты вдоль дороги вначале видео? Владелец земли или администрация города?
@Mobileblaster5 ай бұрын
🤷 I was there to blast not question the hedges 😂
@spacer5676 ай бұрын
cracking house
@Mobileblaster6 ай бұрын
Very impressive plot of land aswell 😊👌👍
@mikecahill31866 ай бұрын
no masking of the door/windows?
@Mobileblaster6 ай бұрын
did you watch the video?
@battlebotts6 ай бұрын
Cover glass?
@Mobileblaster6 ай бұрын
Did you watch the video?
@angel_dawn_morningstar6 ай бұрын
🤩Lovely !🤩 This should have 10k likes already .. 😇❤
@Mobileblaster6 ай бұрын
😊👌👍
@moodyga406 ай бұрын
house can breath now
@Mobileblaster6 ай бұрын
Not sure that was the reason they had this done I think it was for the look of the job as they needed to repoint it 👍👌
@darylb48146 ай бұрын
When you fill in the joints,which is the mortar between the bricks. Itis called, "Chinking them".
@Mobileblaster6 ай бұрын
I've never heard that before 😳 I know it as jointing them up or repointing 😬👌👍
@july8xx6 ай бұрын
@@MobileblasterI have always heard the term pointing or repointing, chinking.only in the Appalachian region but different regional terms are common for different jobs.
@jurgenh36716 ай бұрын
👍👍👍
@Mobileblaster6 ай бұрын
😊👌👍
@amberskyecampbell5 ай бұрын
Didn't realise that sandblasting could use water. Ive seen other KZbin videos where it's dry
@Mobileblaster5 ай бұрын
Yeah its called dustless blasting but its still very messy the water is to suppress the dust it don't do anything els 👍
@carlj35156 ай бұрын
👍👍👍👍👍👍👍👍😊
@Mobileblaster6 ай бұрын
😊👌👍
@peterlogan16236 ай бұрын
this only works on very hard bricks, believe me I've been in the industry for 40 years
@Mobileblaster6 ай бұрын
Well you should know alot better than to comment like that then... 40 year doing various things or shop blasting doing the same or similar thing?
@cetinagar6 ай бұрын
I personally don’t like the orange colour of bricks, so I let my house be painted. And I’m willing to let it repaint every 5-7 years with special paint for breathing purposes and pay for it. Personal choice and I like it. So no mistake, fault or fatal error here.
@Mobileblaster6 ай бұрын
I'm glad people do paint brick and stone it keeps me in work 😊👌👍
@Yevhen_Lohinov6 ай бұрын
👍
@Mobileblaster6 ай бұрын
😊👌👍
@carloseddy10056 ай бұрын
One thing that never looks good ...is painted bricks Nice job
@Mobileblaster6 ай бұрын
My thoughts exactly 😊👌👍
@battlebotts6 ай бұрын
Missed a lot of paint in the grout, wouldn’t have to grind if you got it all
@Mobileblaster6 ай бұрын
Did you watch the video? The joints was ready for repointing and that was getting done after anyways. Infact I've had a text of the owner they have it ground out ready so soon 👌👍
@roland53594 ай бұрын
@Mobileblaster3 ай бұрын
😊👌👍
@Syedbacha-me5vk6 ай бұрын
Wasting a large amount of water
@Mobileblaster6 ай бұрын
Sorry what? How would you recommend I remove the paint?
@davidchristensen69086 ай бұрын
There should be jail time for anyone painting brick
@Mobileblaster6 ай бұрын
😂
@battlebotts6 ай бұрын
Soda blast instead
@Mobileblaster6 ай бұрын
Soda would be too expensive as it would take 100x as much media as it just wouldn't have enough bite to cut through the paint
@GROP3006 ай бұрын
👍👍👍👍👍👍🤣🤣👈👈
@Mobileblaster6 ай бұрын
😊👌👍
@GROP3006 ай бұрын
@@Mobileblaster 👍👍☝☝👈👈
@ЛеонардиниоДжихангиров6 ай бұрын
Считаю бессмысленным со строительной точки зрения
@Mobileblaster6 ай бұрын
What about aesthetics view?
@cindzz476 ай бұрын
Oh what a fudging mess
@Mobileblaster6 ай бұрын
Yeah one of the messiest jobs about but I make sure it's clean when I leave or have spoken about leaving some 👍
@samuelfellows69236 ай бұрын
As that is in a rural location; that would be more likely referred to as a cottage and less a bungalow 🤨
@Mobileblaster6 ай бұрын
😬👌👍 I thort cottages had thatch roofs and period features like beams on display never thort it was to do with location?
@davidspendlove59006 ай бұрын
Careful not to make those bricks too porous.
@Mobileblaster6 ай бұрын
@@davidspendlove5900 that's not applicable 😊
@HorsleyLandy886 ай бұрын
Still does not look great. At least now they can render it.
@Mobileblaster6 ай бұрын
Please subscribe so you don't miss the finished product I will post photos on my community wall when they have the joints filled in 👌👍 it will look like a new build 👍