Extreme Oxygen Sensor Removal

[@RedemptionGarage]

Do you have any tips for getting a stuck O2 sensor out?

[@chrisjones6165]

Plasma cutter,o/a torch,zip disc or hackzall lol. No idea and that's why I struggle Everytime I work on a vehicle. Did manage to diagnose gf car with a misfire and get that fixed.. ended up being bad ignition coil.

[@josephburgess6045]

Heat up the bung threads cool it with ultra lube work it back and forth so it don't strip from the inside out and if it does Mac tools makes a nice rethead tool just for that try that man its worked for me

[@RedemptionGarage]

@@josephburgess6045 thanks for the tips brother

[@matthewslauenwhite7277]

Cut the cord impact socket and the Milwaukee m18 1/2" big dick banana hammock

[@juliojustice3100]

you probably dont give a shit but if you are stoned like me during the covid times you can stream all of the latest movies on instaflixxer. I've been watching with my girlfriend for the last couple of weeks :)

[@tomsanford6054]

Man that was a really good job and I know this will help someone for sure. Your videos are entertaining, informative, and you give clear non condescending directions. Thanks for all you do brother.

[@SluSharkND]

Brother, your videos are so awesome. The production quality is getting so good, and I love your content. It takes a man to say that if you aren't able or comfortable, pay somebody. You are quickly becoming my favorite channel!

[@RedemptionGarage]

Thanks for your support brother it means a lot to me. It definitely does and a lot of guys won't admit they need or ask for help but I see nothing wrong with it.

[@truckerpeterose]

Great intro brother. I have struggled with many exhausts and O2 sensors.

[@RedemptionGarage]

Me too lol. Thanks brother.

[@heavyh13]

This is the extremest of all the extreme. Thanks for the training!

[@davidnull5590]

On Ebay you can buy replacement O2 sensor bungs, many are available already beveled for installation on pipe. These are around $4. Also available are bungs with other shapes and angles.

[@BrewCityRider]

Outstanding video. I recently tackled the front left O2 sensor on my son's 1998 Ranger. It was a bitch, but got it out using PB Blaster penetrating catalyst and a wrench. Entire job cost him 30 bucks for the replacement sensor.

[@jaywilliams6721]

Great video bro and this will defintiely come in handy for sure. You're the man

[@coreysuttles1362]

Great video brother, it really sucks that there is people like that in this world!

[@jsngallery]

excellent!!! never thought of cutting the section out to get the sensor off. then just welding it back on. i dont weld but i think i could just put in a small section of flared pipe in between. again excellent idea!! tks

[@sharonhutchison5923]

Your intro is exactly how I feel right this second.

[@BradsWorkbench]

Damn it boy! I swear ur sub count doubles every time I watch one of your videos. Congrats bud! Keep up the great work

[@RedemptionGarage]

Thanks Brad I appreciate you brother.

[@RobatRobot]

9:00 in and you get the funk out AND a grinder? Rich and Nick would be proud.

[@AntonioClaudioMichael]

Great repair video brother

[@oonojoe]

Good dude. Great Video.

[@corbettknowles9942]

Okay if have trouble with exhaust nuts I break out the torch blow bolts or nuts off with it

[@jacobjackson1713]

Great tips bro

[@khoale1826]

Thank you , you are master as a humble. Top notch.

[@ArrowoodsHobbyShop-Ebay]

Nice

[@RedemptionGarage]

Thanks for watching Chris.

[@rebeccalawson3663]

Great video once again ❤

[@lizardking8388]

Instead of welding in a new bung, you could cut the o2 sensor off flush with the bung, drill out the center with a 16.5mm bit and tap with a M18 1.5mm tap and you're back in the game. Incidentally, if you get the o2 sensor out, stripping out the threads, you could drill out the rust, stick weld some material over the threads (or whats left of them), then drill and tap that.

[@chrisjones6165]

Love the intro bro, u could have been a welder😂

[@francoamerican4632]

I used a pipe wrench with a floor jack handle as a cheater bar after soaking the 02 sensor overnight with WD-40.

[@virginiosantiago3329]

Great

[@chrisjones6165]

I usually pay for oil change. I can watch and 2$ more than just oil and filter. Just Make sure u can watch at Walmart if u go that route. I know I know but I can shop and get it done at once and with kids that matters

[@RedemptionGarage]

It's close in price just to pay for an oil change so i can't blame you there lol.

[@chrisjones6165]

Like the video but to much yellow clutter on the bench

[@RedemptionGarage]

😂😂 what's funny is one guy was saying I was sponsored by Milwaukee because the Dewalt drill died and I said the Milwaukee was better but little does he know I own both and like I told him I'm just giving my honest opinion regardless of brand.

[@jordanzinn4104]

Put a hose clamp on the socket so it doesn't spread

[@truckerpeterose]

Wish I could weld. That’s the one thing I have never attempted on my own.

[@chrisjones6165]

What do u wanna learn? Check my channel out

[@RedemptionGarage]

He's a good guy and a great welder you should chexk him out if you get a few minutes Trucker88 I subbed to him.

[@AntonioClaudioMichael]

Lol at the cussing spree at the beginning

[@AntonioClaudioMichael]

Lol at the muffler bearing

[@joehyundaitech7961]

grate video lots of grate info and tips on removing a sensor. I thought about maybe welding something on to it and using that like a handle to turn it out

[@RokerD00d90]

The beginning of the video is how I am rn

[@AntonioClaudioMichael]

If I didn't give my best work to my customers I wouldn't have any customers that dude gives us mechanics a bad name

[@ron4413]

Don't get under your vehicle without safety glasses. I had a piece of rust fall in my eye and had to go to the ER to get it removed.

[@kevinavery2518]

if its that bad and your on a budget, cut the wires, find I good spot, drill a new hole, weld in an o2 bung and just relocate it, that would be my answer, lil goddy, yes, but allot easier

[@QueBall5235]

Actually that long socket won't help you there is a much shorter ""socket wrench"" bout 10 buck's from carid that's a lot more help n it's long enough handle you can get a bite on it or if you need a cheater bar (which I wouldn't recommend) as stated before don't get in a hurry use heat n very good lube (beeswax is much better) just for grace make certain you use antiseise putting sensors back in incase the new 1s fail just saying

[@georgebonney90]

👍

[@AntonioClaudioMichael]

That dude that welded it on didnt do a good weld job omg

[@AntonioClaudioMichael]

This is the worst situation you could be in with a 02 sensor

[@michaeldecarlo1502]

I'm about to drill a hole in mine and try putting a screwdriver thru it and turning it like that,300 to do that ,u could of bought a whole new exhaust smh

[@chrisjones6165]

No idea, call me when u need copper lines ran, water heaters installed and connected or any steel pipe welded it's out of my elements.. why im subbed to so many car guys lol... Don't hate y'all wanna know how to weld to

[@comando8919]

Pipe wrench 😆

[@sharonhutchison5923]

Your intro is exactly how I feel right this second.

[@sharonhutchison5923]

Your intro is exactly how I feel right this second.