Extreme Resin Stacking 3D Prints - This is wild!

I think I've gone too far. This might be the coolest & dumbest thing that I've ever attempted to Resin 3D Print. Crystal Dragons using Resin Stacking
Thanks to Elegoo for Sponsoring today's video ➜
Elegoo Saturn ➜ geni.us/ABTdtjm
Elegoo Mars 3 ➜ amzn.to/3CQqkTN
Elegoo Mercury X Bundle ➜ shrsl.com/33ha6
Elegoo Neptune 2 ➜ geni.us/2MWuj
Elegoo Mars 2 Pro ➜ geni.us/erkc
Elegoo Mars ➜ geni.us/GGUV82l
Elegoo Wash & Cure Station ➜ geni.us/hgyLGW
Elegoo ABS Like Resin ➜ geni.us/Lb9kl
Elegoo Washable Grey Resin ➜ geni.us/Ufg4
Thanks again to ‪@3DPrintedProps‬ for stopping by!
3dprintedprops...
MY PATREON / My Resin 3D Printer Settings ➜ / unclejessy
Make your own Resin 3D Printing Timelapses with Resinlapse ➜
resinlapse.big...
Wham Bam Slap mats save 15% with code UJ2021 ➜ whambam3d.com/...
Crystal Dragon by Cinderwing3D
cults3d.com/en...
Eastman's 89 Batman ➜
/ eastman
Doses3D Joker Bust ➜
/ doses3d
Tiktok
/ unclejessy4real
/ filamentstories
/ pinklumenade
/ grizzlednome
________________________________________________
Interested in other resin 3D Printers?
Peopoly Phenom ➜
www.matterhack...
Epax X10 ➜
epax3d.com/pro...
Elegoo Mars ➜ amzn.to/2xvAJVr
Anycubic Mono X ➜ geni.us/dmQqQ
________________________________________________
Some Additional Items you will want to consider for Resin 3D Printing ➜
Full List - www.amazon.com...
Disposable Gloves - amzn.to/2Xjaxfo
Plastic Spatula - amzn.to/2Ijrhuy
Metal Spatula - amzn.to/2XgiHoS
Isopropyl (IPA) - amzn.to/2KoTsdY
Pickle Container - amzn.to/2KkWsrH
Funnel - amzn.to/2IjrrCa
Paint Filters - amzn.to/2XcpK1V
________________________________________________
Interested in getting a 3D Printer? Here are some that I use ➜
Ender 3 amzn.to/2GcCECB
CR-10 amzn.to/2Id9o1T
CR-10 S4 amzn.to/2UgWMbL
TinyMachines3D.com
www.tinymachin...
________________________________________________
My PATREON ➜ / unclejessy
Buy Me a Coffee ➜ www.buymeacoff...
_______________________________________________
Gear I'm Using ➜ www.amazon.com...
________________________________________________
Twitter ➜ / unclejessy4real
Instagram ➜ / unclejessy4real
Facebook ➜ / unclejessy4real
KZbin ➜ / unclejessy
________________________________________________
Thanks for watching!
SEND STUFF TO ➜
Uncle Jessy
PO BOX 629
25 Goodburlet RD
Henrietta, NY 14467
#3DPrinting #Resin #UncleJessy

[@UncleJessy]

If you're brave enough to attempt this for yourself you can find Cinderwing3D's files over on Cults3D cults3d.com/en/3d-model/art/crystal-dragon-articulating-flexi-wiggle-pet-print-in-place-fantasy

[@cinderwing3d]

Wow!! Thank you SO much for trying our Crystal Dragon! I really appreciate it! I want to also give a shout-out to Online Handle "Red Syns" for the amazing work in turning our original Crystal Dragon into an incredible coiled resin print! :) Thank you!

[@UncleJessy]

@@cinderwing3d seriously amazing job on this one!

[@tmilker]

@@cinderwing3d Can you add one that's not so long? Maybe stops at the second row?

[@israelmartinez4097]

I’ll take that support tree that failed. It looks dope

[@JVelez1971]

@@cinderwing3d So where is the super long stacked file? Is it included in the regular download when we buy the Crystal Dragon? Or is it a different download/purchase??

[@b8264d]

Very impressive! This could make jewelry casting much more efficient. Can you imagine how many rings you could print in castable resin using that technique? Thank you for sharing!

[@UncleJessy]

Welp, I now have that in my todo project notes!

[@stuartmurphy5138]

@@b8264d im Tempted to attempt the dragon on mine

[@b8264d]

@@stuartmurphy5138 I would love to see the video if you do decide to do it.

[@mykel4661]

Who would you take the resin casts to so you can make jewelry? I was actually trying to find how to start making jewelry with 3d prints, I'm in San Antonio

[@b8264d]

@@mykel4661 I’ve been wondering about that since I posted my comment. I forgot to take in the size of the final print. It would probably be to big for the typical home forge.

[@JohnClark-tt2bl]

Really cool prints, kinda hurts knowing how much resin gets wasted on the supports though.

[@theherrdark4834]

That would make an interesting tree garland for Christmas, especially for a theme tree.

[@fredjoss9551]

For you struggle on removing support without dipping them in warm water, what i do is soak them in room temperature water a few minutes or longer depending of the thickness. Works well on water washable resin before curing. The resin is not brille, still a bit flew and soft, cold/room temp water dont alter the print and i get less support mark then after curing or warping with warm water.

[@adamswitlak1242]

I didn't use the water washable resins. Can you recommend the good ones?

[@fredjoss9551]

@@adamswitlak1242 eryone grey if you can get it, thats the best one in water washable

[@chungnun4948]

@@adamswitlak1242 I have been using JAYO water washable, its my favourite resin in general

[@marsgizmo]

these are just incredible! 👏😎

[@UncleJessy]

Thanks homie!

[@derekeet47]

All the good 3D printing KZbinr congregate in this comment section

[@jg3d591]

Can I have the file for the long dragon pls

[@ethansdad3d]

Brilliant use of resin stacking. I love the red resin dragon.

[@CdoGtheGreat]

Wow, you have those printers dialed in! 11 hours still seems super fast for a full build volume print. I am used to my mk3s but just got my mini 8k. First resin printer. Will need to print that serpent

[@PheonixKnght]

I would love to see them make versions for the Saturn and Jupiter to save on resin and im thrilled you printed it on both.

[@shuvidola752]

Honestly i think the red dragon would look amazing inside a resin table with backgrounds and everything inside

[@TheBlackbirdii]

Whats wrong with your left eye

[@Bynming]

Probably poliosis which makes some hair grow without melanin so he has white eyelashes.

[@jackdeth245]

Exposure to resin.

[@Sopherian]

He has Vitiligo

[@kennykd97]

He' s killed it with this model since you put it on your channel it went around faster than a new strain of covid.

[@crisshank468]

I tried to print this and it turned out great except for the very top of the head didn't print. When I took off the supports, I ended up breaking it in 3 places. I would have loved to see more detail on how your removed the supports.

[@piratajimenez]

I had the same problem, I broke 5 links in the figure, I don't know how to take off the supports without braking the links of the dragon

[@RaG3PlagueDr]

The last like 10 links in the tail end up fused for me even at dangerously low exposure times

[@fablabmakerhub]

I'd be interested in seeing this printed in a flexible rubber-like resin as this method of printing would make for some really cool fashion accessories like belts and scarves.

[@essex0chris]

Hope your eye is OK Jesse 🤞

[@TheMidnightSmith]

Almost 2kg of resin! Woah! Also, for support removal, a cheapo harbor freight heat gun set to medium works just like the hot water trick 😉

[@RedSyns]

Glad to see my mod being showcased! Super exciting as a newcomer to the hobby!

[@3DJapan]

They remind me of the fake leis used for Hawaii themed parties.

[@FilamentStories]

Love it! What a great video on resin stacking and of course amazing results with the dragons!

[@CosplayKitchen]

Hubs: I want that Me: oh yeah, that would be a fun print and would look good in out living room. Hubs: no, the printer

[@rdgk1se3019]

It's too bad the resin makers/sellers don't have a way to recycle used resin......or else run the used resin thru a coffee grinder and mix the powder into new liquid resin.

[@TAiiNE]

What if we want the smaller dragon, but at a decent size? Could you request a 'stacked' version of that one so we can have a larger one?

[@jasonjulian1]

Those bare support structures look like the Crystalline Entity from Star Trek!

[@HenriDP]

You should take the blue coil dragon and put it in the red dragon supports

[@NathanBuildsRobots]

What an insane print. I think that is the longest 3d print I've ever seen!

[@scottturner3831]

Having trouble with your discount code for wham. Is that code updated?

[@lukas.0_0]

You can turn the red supports into a little roller coaster. Just add some rails and a cart.

[@Vlad2319]

The supports are a dragon tree xD Edit they're both probably an inch longer than listed as they did curve and weren't perfectly straight

[@bitzbox]

These are pretty nuts! Very impressed with how well they printed

[@NoraIconiq]

Damn these dragons are longer than my height.

[@elleofmusic]

awesome! And with that support-nipping bit I think you invented ASMR Nightcore 😯

[@thered_hood7451]

awesome video! if you don't mind me asking though, how are you not bothered by the resin smell and fumes? i see that you are actually able to work with raw uncured resin without any kind of respirator also, are the kind of resin you use nontoxic or something?

[@josiahgoetze210]

This is unfortunately a case of not caring. The mask they do wear at one point of the video also don't protect them. What might be more concerning is the fact that they also don't have any ventilation.

[@sirultim8643]

I hat is that white stuff on your eyelid?

[@ohluke2424]

I have the same question

[@Lemming1970]

purchased the file. Cool file.

[@kameroc]

So freaking cool, man! Could you cover making flexible stamps, like rubber ones, and hard ones for leather in both resin and FDM?

[@J0SHUAKANE]

That looks so unstable & not worth the risk of failed prints & wasting even more money.

[@jtjames79]

Challenge accepted.

[@dexterm2003]

Could you print a long FDM version on the CR-30? That would be pretty cool to see.

[@ill_insect]

I would love to do this but I’m broke, I find these things super interesting! 😂

[@BrandonsYouTube]

It's still insane to think that only took 13 hours.... FDM would have taken DAYS! lol

[@l.r.designstudioslauriesul8993]

That resin is really beautiful- love the color

[@DJ12850]

would wrap that thing around the tree at Christmas time lol

[@TheBeddu]

Wow, how did it take you only 9 hours? It took me 14 on my Saturn with very non-conservative settings!

[@Flipla_Scrip]

What’s on your eyelid?

[@stephenrendall]

Hey Uncle Jessy, I have terrible warping in my resin prints, i would love to see a video on tips to reduce or prevent this from happening. If youve already done something similar could you point me in the direction of the video? Thanks my man!

[@3DMusketeers]

Oh man that fail HURTS! Make sure you wash your arm from that raw resin exposure (mind you, you likely already knew this..) WOAH that resin print is MASSIVE! How much material did that use?!?! Talk about support ASMR. Great project print, wow! Pretty cool!

[@lizzz3ard]

Tip: when not using a flex plate, put some IPA in spray bottle and spray the IPA on the scrapper, when the IPA get in between the resin and bed the resin part will pop off the plate.

[@tenchuu007]

The supports are clearly to be used as a marble run.

[@mattinkel7342]

How are people designing the print stacking? Is it modelled directly as part of the STL or is it some add on feature for the slicer?

[@kajn3206]

it's almost unbelievable printing maybe I'd like to come up with some automatic additions for even smaller printers

[@felrickson]

10:54 Americans would use anything rather than the metric system

[@doritoking3403]

Wym you don’t measure yourself in bottles I’m about 6 1/2 Dasani water bottles

[@AtomsLab]

Those red supports remind me a bit of the castings people do of ant hills. Super cool structure! And great job on the prints and timelapses, those dragons are so cool.

[@jg3d591]

I will pay you for the stl file pls

[@tiladx]

I kind of want to make one of these in a translucent resin and figure out how to wire small LEDs into the segments without destroying them.

[@GeneralHowToTutorials]

Thank you for using the bottles, the tapemeasure meant nothing to my American brain. But bottles, those units are perfectly acceptable.

[@sedled2829]

is your eyebrow ok?

[@CJ-ur3fx]

5:34 that's why you should confirm EVERY print you do with UVTOOLS first.

[@JohnnyFaber]

Seems like the resin makers designed the support software to maximize their profit margins...

[@JoseAlvarezV]

Hey Im a long time fan! that looks Amazing!

[@sledhead904]

The masks. Smh

[@MrCow579]

As someone who sells stuff on etsy and fiverr: stacking saves me a BUNCH of time.

[@jinkxkng]

cant wait to see them custom painted lol

[@MrBiggerdaddio]

you have a great video! very neat! educational... but... why is one of your eyelashes white? like... i wanna pluck them for you. is it a stye? "moleh, moleh, moleh, mole. i wanna chop it up and make guacamole." - austin powers hammering home

[@SPProps]

Pretty crazy print! Do the pre-supported files also work on FDM printers?

[@S0Fr3shThisKid]

No. Different method of printing. Slicer software is different

[@Just_Randomi]

I've seen a bunch of his videos and does resin fumes not effect his eyes or breathing. This is crazy. Are there people immune to the effects of resin?

[@FlipX100]

Reminds me of the huuuuuuuge dragon from my dragon maid. The girl with the green hair. She turns into a really long dragon. 🐉

[@HapaxLegomenon12]

I feel like you could turn the red support structure into some kind of marble run.

[@MidnightMarrow]

This is the only thing I hate about 3d printing aside from how long large prints take. The sheer waste due to needing supports. Wouldn't be so bad if we could properly recycle but without such, it just pains me.

[@gnivler]

You're crazy busting apart supports without safety glasses! (cool vid tho!)

[@jaspercallahan3318]

So the stacking supports is that in the paid version of chitubox? Or is this possible if u stack objects above each other will auto supports recognize this? Or do you have to manually put supports in when stacking

[@porterdan23]

Do you do anything outside of KZbin work. I have a 3d print that I would like to mass produce but have yet to find anyone capable of doing so. My name is Dan and would like to talk to you about that if you don't mind. How can I get ahold of you?

[@ericjones8289]

Printed this on a FDM printer today update you once I remove supports and (hopefully) get it working

[@mr6k]

did nobody notice how its blue and red like gyarados from pokemon and shiny gyarados

[@josephhenderson2915]

I’m knew to this. Having problems trying to get a good print. I have the elegoo and the Creality halot. My prints aren’t sticking.

[@ericsalidbar1693]

Do those kn95 mask actually work? They really didnt do it for me my throat and lungs still hurt. I ended up getting an actual chemical gas mask

[@powderedtoastman-boogas9445]

Got something on your eye lash, I dont know how it’s not driving you crazy! Awesome print!

[@miatakid2]

God bless America, 16 bottle long lol , we will find any other way of measuring to avoid the metric system 😀😄

[@giannix6769]

I hope somebody can answer this question I have , can I put anycubic resin on my Elegoo Mars 3 ?

[@thomaschase7097]

So because you are wearing a face diaper, I guess you think underwear stops farts and you can catch mosquitoes with chainlink fence.

[@Amosyahu]

Can you please tell me how you loosened the segments? Because I have a slug with a stiff joint segment and would love to fix it. Great videos. 👍

[@whatyoudo9773]

you just cured a bunch of resin into a nasty un-usable rope. The perfect file direct from resin making co's to sell way more resin

[@baguette_628]

I really want to get one I asked for one for my birthday and didn’t get it I would get a 3d printer but idk how they work 😭 Also I’m loving the red dragon looks very pretty

[@silentpaw]

I know it has been two years, but how do I print something like this using my new Saturn? I am trying to do this with a shenron model I found for a friend.

[@fynnkwast2745]

what are theses freedom units? Feet, pounds and ounces. Im a lazy from the internet please include metric measures in the future :). Great video

[@saxplayingcompnerd]

wow m4sks. bye.

[@whatyoudo9773]

feel like those dragons are the same as the fidget-spinner fad...just way too much of whatever they can sell but not something you want to keep or even use.

[@jimmyjames1807]

why would u stack prints, its so difficult taking the parts of the build plate and restarting, u are open to having more failures

[@thomasleblanc4914]

Wonder if you could make the dragon and sell it to someone who doesn't have the capabilites of making one theirself?

[@vulcan2255]

What I think would be cool is if you printed the dragon in blue on the Jupiter and placed the blue dragon on the red supports and vice versa

[@mitcho590]

I'm new to printing and I was wondering why people don't do this more often, why don't people do this for table top minis?

[@AbdulAziz-cj4hg]

ii have a question, used blender, and some object are not joined but intersected, will it print together on SLA printer?

[@MaxHarden]

I just ordered my very first 3D printer, the Elegoo Saturn S with ALL the accessories you have recommended and used on this channel. It will be here tomorrow. I don't yet know the plate size (V1, V2 or V3) so I can't order a flex plate yet. I'd like to print this as my first 3D print ever. Do you think I can do it? :)

[@CdoGtheGreat]

What is this ? A "Dragon measuring" contest? Haha, jk.. this is awesome

[@Zeloverevolution]

I was quite enjoying all your videos, until you went full imperial...

[@RaG3PlagueDr]

If anyone has had luck printing this on a mono screen could you share your slicer settings I feel like I've tried everything and don't wanna waste any more resin trying and failing to get this to print

[@joeevans3709]

Is anyone aware of a compatible resin vat for the saturn. Wanting an extra or 2 to reduce down time from buisness when the fep needs to be changed.

[@somathebest]

How can i eneble that "bath cleaning feature"?Like from spain!

[@demented6996]

Miss opportunity on the Sesame Street Count Dracula laugh as you was counting feet!

[@Mehorai]

So for the red support you could make some flexible like train tracks and maks a rollercoaster thing

[@mirgill1]

Say Uncle Jessy, did they come out with the Elegoo Saturn 6k? If so, did you cover a review on this?

[@Telmuun1]

Seeing this I need slightly clear colored resin for just looks and normal grey resin for painting