I have absolutely no clue why 143 people have disliked this video. Absolutely perfectly described and videod! Thank you very very much!
@door49422 жыл бұрын
You're welcome!
@cfiirotorcraft-helicopter Жыл бұрын
Piece of cake
@noneprovided51689 ай бұрын
Cause the POS lock still won't pair in the app
@russelmuldowney87363 ай бұрын
Because it's not working
@kittyreincat Жыл бұрын
Thank you so much!! I was having difficulty with my lock after changing the batteries. Your video was much more descriptive than the user manual. My lock now works and I am able to leave my house.
@MartinTessmer5 ай бұрын
This procedure was very helpful. Here's a few tips that might make it even easier to complete: 1) The "factory preset codes" are the 4-digit user codes, not the longer programming code. 2) When it comes time for you to enter the 4 digit user code (after you've reset the lock), press the outside Schlage button and RELEASE it. Wait for the screen to light up, then press in one of the two four-digit user codes, making sure that you see a green check mark after you press in each number.
@AlexTechWiz6 жыл бұрын
This video saved a phone call to Schlage customer service. Thanks a lot, Sir! You are the man.
@yerinarita5x363 Жыл бұрын
This video helped me,i was using hand key for 1 year and today find this video
@viziondfc7 жыл бұрын
I thought my lock was broke, I was super bummed I was going to have to send it back. This video saved my arse! Thanks!
@jamisonr4 жыл бұрын
Same here!
@yosh_lopez Жыл бұрын
I revisit this video annually when I have to change my parent’s lock. Thank you
@davidgarber89446 жыл бұрын
Well done , just reset mine as well after being on the tech support hotline hold for 27:30 and no answer. Works great
@irsamalik78486 жыл бұрын
My Schelage was draining batteries and was not working. This tip fixed the problem like a charm.
@andybaran92183 жыл бұрын
Thanks so much! Very useful to see how it's done as opposed to just reading through the manual.
@door49423 жыл бұрын
You're welcome!
@TravisTurenne5 жыл бұрын
Thank you. Like others here, I was right about to return the lock until watching this.
@bgwyn62437 жыл бұрын
Thank you I was going crazy in this video save my life. You were way more help than anyone at the company
@DrL33productions2 ай бұрын
This dude just saved my butt! Thank you 👏🏾👏🏾🙌🏾🙌🏾
@GlueC6 жыл бұрын
Maybe I missed it in the troubleshooting chart, but I didn't see this. It worked, thanks!
@wj75128 жыл бұрын
Thanks so much for this video. I thought I was going to have to send my unit back but the factory reset seems to have solved the problem!!!
@_mikishi_3 жыл бұрын
Thank you so much!! Been troubled by this for an hour, glad I found it.
@pazziefsu6 ай бұрын
Life saver video. This helped me out so much!
@nevadamunoz52 Жыл бұрын
Very helpful video! Thank you!
@JeremyZimmerman8 жыл бұрын
Super helpful, and I didn't see this listed anywhere else. I couldn't get my system to connect to smarthings after taking it off of ADT Pulse. Only doing this procedure, followed by a an exclusion, and THEN adding using the search directly for this lock, not the general search. Finally got it done. Thanks!
@JeremyFisher7117 жыл бұрын
omg this was exactly what I needed THANK YOU
@paderone127 жыл бұрын
the video was great..it helped with perfectness..thank you
@guavaball8 жыл бұрын
I was going insane trying to figure out what was wrong. I tried the old bolt and it didn't fit right so I had to disconnect the unit to put the right bolt in. That's when I got the error messages. I thought it was an installation problem. Thank you so much for this video.
@ready4theworld1493 жыл бұрын
. It won’t let me enter my programming code. The programming code is a 6 digit number. It only allows me to type the first 3 numbers and then there is a RED X and it won’t allow me to continue to add my code. Can anyone help? I have the Encode
@Invertedworldx5 жыл бұрын
Great video man informative
@GregoryGuay4 ай бұрын
Suddenly, my keypad is not working yet my Apple HomeKit Bluetooth connection works fine. I put new batteries in it, but the keypad is still not working. Now it does a single beep. When I try to do a factory reset, by removing the batteries and then reconnecting while holding down the Schlage button,it continues with the single beep and double green checkmark blink. This video says it’s supposed to blink three times but this is not the case.
@kevinthomas24704 жыл бұрын
Very helpful. Thanks.
@door49423 жыл бұрын
You're welcome!
@jimryannz6 жыл бұрын
A great video thanks and had to reset a couple of times after doing a firmware “upgrade”. I wonder if management of these type of entities every check to see what grief their engineers put their customers through! The lock worked fine for the first year that had it until updated the firmware and then it took about 10 days of stuffing around to get it all working ok again.
@Just_E12 жыл бұрын
To save you hours of headache: If you are trying to change programming code and it won't accept your current programming code, then you can easily reset to default programming code by unplugging the wire from the battery, then press the exterior schlage button to clear any additional memory cache, then press and hold the exterior schlage button as you reconnect the battery (you may have to do this twice if the default programming code doesn't work). Also note: the programming code can be found on the inside of the unit itself if you can't find where you placed it. Also, if you set up the app, and connect it to your door, the programming code will automatically no longer work. It assumes you can program everything on the app. You can reset following my instructions above if you want to remove the lock from all devices and erase everything from it's memory. Good luck🤞
@virynieto77834 жыл бұрын
Super useful!!👏🏻
@door49423 жыл бұрын
Glad it was helpful!
@yburcharm2 жыл бұрын
i did it! thank you sooo much!
@door49422 жыл бұрын
You're welcome!!
@R_ixxLp3 күн бұрын
I did it but a red x appears after the user code :(
@kitemonger Жыл бұрын
Can you change the code to open the lock?
@piaroger8582 Жыл бұрын
I’m only getting two green checks
@learnjcbskidsterchickensga7594 Жыл бұрын
Mines a different model and I take the one screw out and I can’t get the cover out
@HMWells-hm9yf7 жыл бұрын
good job, my man!
@fernandosauret19063 жыл бұрын
I have tried this, but my lock stops working right away, when I press the shclage button nothing happens, and if I press one of the numbers the x (red light) comes up. Any idea how to fix this? TIA
@door49423 жыл бұрын
I would first try to replace the batteries, the red X usually means low battery.
@ready4theworld1493 жыл бұрын
Did changing the battery work? I am having the same problem. It won’t let me enter my programming code. The programming code is a 6 digit number. It only allows me to type the first 3 numbers and then there is a RED X and it won’t allow me to continue to add my code. Can anyone help? I have the Encode
@deejayspillz2 жыл бұрын
@@ready4theworld149 same issue. Any luck?
@ready4theworld1492 жыл бұрын
@@deejayspillz yes, we went in and set the code in the app that we downloaded and it worked
@deejayspillz2 жыл бұрын
@@ready4theworld149glad to hear it. I finally got mine working after an hour and a half.
@LBCupertino5 жыл бұрын
Thanks, I had to return once by this problem, If I watch this video I don't waste my time and sending the wrong complaining.
@Zendog5005 жыл бұрын
My lock , model 24529380, went stone cold dead. So unfortunately this reset fix did not work. My house and the lock are only a year old.
@sdisaia14 жыл бұрын
r sanchez mine too. Completely dead
@windowsvistasuxalot3 жыл бұрын
The battery pack gets rusty and causes no power. Bad design. You have to clean it every year 👎
@gabrielvalentin74743 жыл бұрын
Thank you!!!!
@door49423 жыл бұрын
You're welcome
@AUniqueHandleName4442 жыл бұрын
This did not work. I didn't see the 3 green checkmarks. I have a schlagesense BE479AA
@javiervalladares48742 жыл бұрын
I dont know why it does not work the X keeps blinking when i do the procedure
@josesalazar21654 жыл бұрын
Thank you did work!
@door49423 жыл бұрын
You're welcome!
@rg4697919 күн бұрын
I’ll be ready to retire by the time he gets to the actual reset procedure.
@dgail6206 жыл бұрын
This worked, THANKS SO MUCH!!!!
@coolboarder6549 жыл бұрын
Just did this and it stayed connected to my SmartThings hub. So seems like it does not reset the z-wave pairing. I could not find this procedure anywhere in the manual. I don't know why they don't include it. I moved the lock from a door with the lock on the right hand side to a door with the lock on the left hand side and the electronic mechanism was trying to turn the lock the wrong direction. It seems that the only way to get the lock to relearn the direction to turn is with this procedure.
@alphabuster1876 жыл бұрын
I cannot connect it to HomeKit. I tried this reset and it did not reset. Everything works, the app, the lock, the lock with the app, I just can’t pair it to HomeKit and Apple TV 4K.
@BaNha725 жыл бұрын
I try this factory reset but it’s still not reset the clear Z wave last setup.The problem is when i try new set up z wave its come up x red,the factory reset was not completely clear the data for the z wave .
@Elc0chin03 жыл бұрын
this is an old video but I have this lock so here's my question. I actually have two of these locks. They work fine and I also have a zwave smartthings they are connected to which in turn they are connected to alexa where I can lock the doors or set up a routine to have them lock at a certain time. Problem is that they some how disconnected from my zwave. Will setting the lock to the factory setting require that I reinput all the codes? Will it also enable me to connect to my zwave set up again? If so how? I don't remember how I set it up in the first place. (looking for my documentation.)
@johnmichaelcarlton6 жыл бұрын
You Rock!! Thank you!
@Really_Brooks2 жыл бұрын
Worked!
@ChrisMedici Жыл бұрын
Thank you!
@marcosramos64114 жыл бұрын
Thanks!
@door49423 жыл бұрын
No problem!
@halo222804 жыл бұрын
Now the battery cover won’t fit back on Nd it’s pissing me offf ughhhh
@manuelsalgado85104 жыл бұрын
I can’t get my lock to work with the app, any thoughts? The app doesn’t detect the lock when I put in the programming code...HELP
@JorgeMedina-ft9tq7 жыл бұрын
How does your lock go on that side of the door? I'm having trouble having mine lock from the inside causing it not to lock
@door49427 жыл бұрын
Please call our tech support line for assistance.
@manuelsalgado85104 жыл бұрын
This is not working for me 😔😔, I’m trying to get this to work with Alexa but it’s not accepting my programming code
@Themoondarkside13 жыл бұрын
Neither of the 2 codes are not working
@kylemitchell925 жыл бұрын
Thank you!
@carissapainter27643 жыл бұрын
What if none of the codes are working?
@cnjrose6 жыл бұрын
what should you do if the lock does not do the setup routine and insteads blinks the red X
@door49425 жыл бұрын
Have you tried the factory reset and new batteries?
@zlaureti8 жыл бұрын
Thank you for the video. I followed the procedure to performed the factory reset. My problem still persist: The pad works for a given period and stops responding as if the batteries were dead. (Batteries are new and I tested them) If I disconnect and reconnect, the pad works again for a given period and stop responding again. Have you seen this problem before? I wonder if I could only replace the board. I bought it 1.5 year ago and it is no longer under warranty.
@door49428 жыл бұрын
No problem. When you say not responsive, does the Schlage button on the keypad do anything?
@zlaureti8 жыл бұрын
No, it is dead, no light, no beep. When I disconnect and reconnect everything works well only for a short period
@door49428 жыл бұрын
I would suggest giving out support center a call to further troubleshoot this matter - 1-800-900-4734
@theconcorden8 жыл бұрын
Im having the same problem and it is SO frustrating! :-(
@zlaureti8 жыл бұрын
Call support. They were able to help me out. I need to send them a picture of my model and I will get a replacement!
@Gorilla_Jones5 жыл бұрын
My outside lock button won't lock when pressed. This reset didn't work!
@mawjoe15 жыл бұрын
Gorilla Jones what did you end up doing ? Same thing happened to me- installed lock and Schlage button does nothing. Tried to use the programming code and the user code and it always goes red X. Please help
@MarVAllen6 жыл бұрын
I’m lost when he says complete the reset procedure by repeating the initial setup process?....
@door49426 жыл бұрын
As per manual instructions. After the reset the lock is back to out of the box factory default status.
@malorytruman11896 жыл бұрын
I don't have the manual -- I just bought the house & the original owner didn't keep the manual! How do I change the keycode? (Everyone and their brother knows how to get into my house!)
@lexissssj4 жыл бұрын
@@malorytruman1189 I'm trying to figure out how to do the same thing
@OldGuyBigFoot4 жыл бұрын
It is not taking the code. won't connect. no real instructions on what to do next. did it like 5 times. ugghh..
@givannyandresvelasquezreta54387 жыл бұрын
no tengo el manual y quiero cambiar la clave quien me indica
@shawnmia19596 жыл бұрын
THANK YOU
@GD015 жыл бұрын
What if I can’t get into my house?
@Aleziss9 жыл бұрын
hmmm... does this reset the z-wave also ?
@door49428 жыл бұрын
+Aleziss Yes it does, it's a factory reset.
@Madpenguin9097 жыл бұрын
No it does not, I have just tried this on my own lock. And the rear schlage light still indicates it is enrolled with the previous "Wink* hub.
@akbychoice6 жыл бұрын
Jeremy Thompson I finally got Z-wave removed. Had to have to app on the phone open while I removed it per the reset. Didn’t make any difference in the lock malfunction. Sometimes the pad will light up sometimes it won’t. Sometimes any key pressed once gives a RED X. Other one of these locks has no issues. Haven’t had it work right once since using the Z-wave. I’d never install anything that needed Z-wave again. It’s been the biggest headache. Now it’s gonna cost me $175 to replace the lock. The lock won’t reset to factory settings no matter what. New technology sure can screw you over.
@CraigTooms6 жыл бұрын
I am having the same issue, did you ever get it figured out? Factory reset but still says it is enrolled. Thanks
@akbychoice6 жыл бұрын
Craig Tooms the lock is now no better than a manual lock. I spent hours trying to get it back to factory settings with no change.
@ronaldupchurch9752 Жыл бұрын
This is the second home in which kzbin.infoUgkx0jZ_lGlDVJhDnmagEU8gn47cmfPNlLQU we've replaced our "regular" doorbell with a Ring video doorbell and we really enjoy it. It is very easy to install and it works very well, with a clear picture through the app and good in-home use (we added the chime, which is also easy to install and doesn't require another thought to use).
@williamkauffman88983 жыл бұрын
There is something wrong when it takes videos to enable you to use a lock. Schlage definitely needs to go back to the drawing board
@stevenhan18114 жыл бұрын
Starts at 1:45
@drummerseahawkboy3 жыл бұрын
This doesn’t always work, and Schlage customer service is pitiful. It took us a week to get ahold of someone because of being on hold for so long. I mean we have our own shit to do during the day we can’t sit at home and hold the phone for 2 hours everyday.
@lcfangamer19637 жыл бұрын
didnt work :( help
@edgarmartinez-xr1og10 күн бұрын
No
@SnoochGaming3 жыл бұрын
what if the lock stays inside the door and doesnt extend?
@door49423 жыл бұрын
Electronically or with the inside thumb piece? I would verify the correct mechanical installation and then follow the procedure here for a handing reset.
@bradylombard34867 жыл бұрын
Would this work for trubolt? I have one just like this just different name
@door49427 жыл бұрын
Sorry I believe you do not have our product.
@fostervann23483 жыл бұрын
POS lock
@oscarvtube8 жыл бұрын
do you know how to reset the zwave setting
@robleffley98698 жыл бұрын
The z-wave "setting" is controlled by the chip provided with the lock. It cannot be altered.
@oscarvtube8 жыл бұрын
Thanks for your advice. I have solve the problem via wink support team.
@vikasboyanapalli11213 жыл бұрын
Chedkan
@mixerguru6 жыл бұрын
my lock was broken or just a piece of shit from day one
@georgescachan97022 жыл бұрын
Georges
@mixerguru6 жыл бұрын
this video wworked for a year then lock failed back to just like it was new . tweaked gears again still broken, it is a whole year old i can see how its worn out for 100$ . the problem is not it doesnt lock except by hand if you try to lock it from outside it does nothing if you unloack it from any deadbolt position it just cycles and grinds total piece of garbage overpriced piece of dung
@GreatestLoserEver4 жыл бұрын
Thanks! I lost the book, and looking under the battery cover saw nothing. I just needed to unscrew the unit for the codes. :)