Fake Benchmade 940 - I GOT HUSTLED IN A TRADE! Reviewing a Clone & Comparison to a Real Osborne

[@2873lonewolf]

My father got duped in April for $130 on a 940, looks like the same box. Labeled s90v box and blade said s30v. It was my bday present, I'm 48, so I had to break it to him unfortunately. Mine was green aluminum. Another tell tale sign is the machining lines on a real one. Thanks for helping the community and putting this out there, you may have saved a person and saving even one means counterfeit loses a sale!

[@calebs.8776]

Nah, I can fully understand someone buying a good clone of a very expensive knife so they can see how it feels to carry, I did it for a Bugout. I'd rather spend 160$ and know I'll like it than 140$ and hate it. (EDIT: counterfeits are terrible and you should not support them, I meant copies not clones)

[@DocP91B]

Except a lot of the time you aren't getting the real experience. Look at rhis very video. This 940 clone that isn't even close. It's got plastic handles and terrible fit and finish. If someone bought that thinking they were going try out a 940 before buying the real thing they wouldn't get anywhere close to a real try.

[@calebs.8776]

@@DocP91B well that's why said "good" not this wish trash, I'm talking about byrd and ganzo who make very high quality knives that are dimensional copies. That's why I bought a Spyderco after getting a byrd and loving the ergos

[@DocP91B]

@@calebs.8776 so you aren't talking about clones. Clones are counterfeits made to be passed off as the real thing.

[@calebs.8776]

@@DocP91B I retract my clone statement, that is what I meant, I don't agree with buying counterfeit

[@appleztooranges]

Dang very informative. New to Benchmade 940. Thank you

[@TridentNorthBroadcast]

If it is that hard to distinguish between a fake, chances are you are just paying for the Benchmade name.

[@OnInParGolf]

This is a great PSA video! Great content, Doc. Thanks for showing us these fakes!

[@sitramasoon]

Yep , I got once before. I wish I was viewing this VDO of Explanatory of Benchmade Knife. Thank you for post this VDO and benefit lot of people who have no idea and end up with fake stuff

[@ahaubert80]

I'm sorry you got scammed! It's one thing for someone to buy a clone to feel better about their EDC, but it's another to screw someone else over in a trade or sale.

[@RetirednbrokeinPa]

I purchased a 940-1 recently from a reputable knife vendor. It was sold to me as an open box knife that was returned to them by a previous customer. It was the exact knife that you show in this video. The vendor took it back and retuned my purchase price plus shipping both ways. His previous customer likely purchased two knives and sent the counterfeit in the genuine box to the vendor for a full refund. So the crook got a genuine Benchmade for a fake price, and an honest vendor was taken. Beware, any time you buy one of these pricey items… verify it and examine it closely!

[@jeetts59]

I have both original and clone, and to be honest, the clone is better in many ways . I’ve sold the original and kept the clone.

[@DocP91B]

How is the clone better?

[@Aaron-lx3gz]

@@DocP91B it’s not

[@DocP91B]

@@Aaron-lx3gz but...but...you said it is in many ways. I'm curious what you like better about it.

[@RandoWisLuL]

@@DocP91B you quoted the wrong person mate

[@Trolldaddy5]

What would happen if you bought one of these, thinking it was real, and then send it to benchmade for sharpening? Would they sharpen it and send it back or destroy it bc its patent infringement? Or would they send it back to you, but refuse to perfom any service?

[@gregorygolden1296]

Thinking they wouldn't send it back because it's a slap in their face. Sure would be a drag if someone didn't know, spent the money for a real one and found out after sending it to Benchmade.

[@jskjsk3986]

Just picked up a 9400 from Benchmade to be sure it was genuine. Just fyi the Benchmade logo is below the grind line on it. No doubts about authenticity. Unfortunately there is a large market for clones.

[@byerboys2607]

Hey brother do ya still have this box and knife by chance I work for benchmade I would be curious if you could send that to me so I can get it in the right hands and possibly get you a replacement 940 ozzy

[@DocP91B]

Man I really appreciate that! I gave it away to a viewer a long time ago after I re-did it to make sure it could never be mistaken for a real Benchmade again. That's really awesome of you to offer!

[@byerboys2607]

@@DocP91B it was worth a shot we try to get a few clones here and there to keep up on what’s being done to clone our stuff the lengths that they will take are mind blowing to be honest the best thing I can tell you or your subs is to by direct from us or from somebody you 1000% trust but still check the knife bc they may have got a clone from somebody their self so always check any benchmade and the best advise is to do face to face deals so you can handle the knife for yourself

[@CKarhu85]

I purchased a 940-1 on Amazon in Europe and received a fake. It was delivered in the correct box with the correct pouch and papers, but it was a terrible counterfeit! I tried to write a negative review on Amazon, but they denied it. This thing was so bad, I had to force the blade out! It even said S30V on the blade! Ever seen a Benchmade in CF and S30V? I think it's bad on Amazon not to accept the review, people should know. The seller probably took the original 940-1 and swapped it for a cheap copy in the original box. I have photos of it saved. The worst part is I payed retail for it, but of course got it refunded. I ended up getting the original 940-1 cheaper from an European online store!

[@03_austindrake88]

That is just messed up! At first I was thinking maybe the person didn't know but then you talked about how the person sent you pictures of a totally different knife. It'd be hilarious to send the blade in to be tested to see what the steel actually is. I am guessing it is something like 440A. Sorry this happened to you. Thank you for sharing this with us. Great video!

[@robertcopeland1354]

Doc if you don't want it i'll take as a edc work knife I won't feel bad about beating up or loseing. :))

[@reddawng43x91]

Pay the man the amount he lost

[@RandoWisLuL]

@@reddawng43x91 thats on him though

[@carsonristow468]

you can get these for 13$ on wish but compared to my original i prefer carrying the fake purely because of the chance of losing my og one and its still not a bad 13$ knife, not as high quality but still im not gonna cry over losing this one but in your case i would be pissed too.

[@nwe2009]

Thats why I get cheap knives on amazon with their own designs as beaters. Its so hard not to carry the nicer ones tho but the risk is too high

[@willtrax71]

I’ve been taken before and of course the seller has NO IDEA lol.. The fakes are getting so good that you have to be careful but yes the best tell tale is the raised Butterfly, if you can feel it and it’s thick on the blade it’s crap and I’ve actually handled a fake Contego that the Butterfly was barely there. There are so many on eBay and that’s where I got my fake SOCP folder. Great Video and I’m the 4 good knife collection Guy. Stay safe my Friend Semper Fidelis

[@greywolfoutdoorshomestead9962]

$12 for that knife on wish.i just went and looked.

[@greywolfoutdoorshomestead9962]

And on Amazon it's well over $100

[@DocP91B]

I couldn't find the clone on Amazon.

[@FALLONMICHAEL1022]

I just got took for for benchmade Knives off of eBay! A Osborne 940 carbon fiber and a Bugout 535. I have an authentic mini Bugout and was comparing them to it when they came in and man what a disappointment. I am totally depressed over this! I can’t believe it’s that big of a problem on eBay. Lesson learned I guess. I got so many pics pointing out everything that’s wrong. It’s even a little different from the one you’re showing here.

[@DocP91B]

Yeah, you can hardly trust eBay anymore. Sorry you get screwed. That really sucks.

[@FALLONMICHAEL1022]

@@DocP91B yeah I sucks man. I kinda splurged on these two knives as they haven’t really been in the budget but saved for them both just to get screwed over. I knew they were out there but really thought eBay wouldn’t let this happend. I have about a 100 orders I’ve made on eBay over the span of a couple years and have never returned or asked for a refund on anything. Hoping that helps to remedy this. The Osborne is a pretty good fake for someone who doesn’t know but the Bugout is horrible. When closed the tip of the blade doesn’t even sit all the way down inside the scales. 🤦🏼‍♂️it’s bad.

[@DocP91B]

@@FALLONMICHAEL1022 you can try filing a claim. With payapal or ebay for counterfeit items. It's about 50/50 you'll get your money back. But you've got nothing to lose by trying.

[@jacobdalebout584]

Ya I got a bugout and it was fake then a 940 today and as soon as i opened it fake again. Like I just want a good deal for a used knive but you can't buy benchmades on ebay.

[@DocP91B]

@@jacobdalebout584 I stopped buying anything but really lower end knives on eBay. It's just not worth the chance of getting scammed and these days it's just Full of scams!

[@peaceboyjohn4204]

Im so sorry to hear about this bro Doc be careful out there people are scamming up the butt but in AZ stores they sell real USA Brand knives but in all honesty i hate Fake Knife scams once again be careful out there Doc im here to support you buddy

[@ronaldroberts8515]

Now i see 945 with green aluminum scales on ebay and for 139 dollars wanna get but thinking they could be fake.

[@servantofyeshua2313]

That’s rough brotha. So sorry. God bless.

[@reddawng43x91]

What that bastard did is theft ! Period! I got zero tolerance for a “thief” may as well be hangin from nearest tree imo! It takes a lot of sand to be a thief of this caliber!

[@davidnapper8097]

Hate you got scammed like that ! It is definitely buyer beware on these high end knives . If there's $$ to make , they will fake ! Thanks for the info , really enjoy the channel 👍👍

[@CanukArgento]

i can hear how happy you are after spending $600 for a folding knife ....

[@jordan-dl2or]

I own this 😂 to be honest it's not that bad for fake one

[@aquariys]

Just ordered one from wish..how.s the steel..is it 440c? What can i expect.handle material..thanks🙃

[@mcomp1732]

I want to know if the guy you did the trade with is going to make it right? If not throw his name out so nobody else gets taken.

[@DocP91B]

Nope, he totally ghosted me. Not surprised. I posted in my Facebook groups to spread the word.

[@aquariys]

Sorry that you got tricked..really wanted a 940 carbon but the price was just absurd so ended up ordering a clone like this from wish and what do you know..it.s being shipped from usa..i don.t support clones but i wanted this tipe of blade shape and ganzo g7562 is not availble for sale..it.s not a bad knife comsidering the price of a clone..you get what you pay.

[@Aaron-lx3gz]

“I don’t support clones” then goes and buys a clone. Lol.

[@aquariys]

@@Aaron-lx3gz got the knife. D2 is good and the price of the real one is unjustified..also have a real bugout and i carry the 940 clone more.

[@gregorygolden1296]

Sure seems your looking at a 90/10 percent chance of getting a fake if you don't buy from Benchmade directly. Or someone like Blade HQ etc. I bought a fake mini Bugout.

[@monaangeloutdoors514]

Thanks good video 👍

[@MrBluoct]

Tackle box knife

[@AlU-yp1mj]

Oops

[@toddcarr.]

This seems to be a person that is knowingly selling fakes. Would it be any help reporting this to authorities or is it a buyer beware situation that nothing can be done about? Love the vids keep making sharp things fun and enjoyable.

[@DocP91B]

Authorities don't take much interest in something like this. Too many and too small. Also too easy for the offender to say "oops - I had no idea..."

[@toddcarr.]

@@DocP91B just wondering because you mentioned that other people were also hustled by this person. thank you for the quick reply. Keep making sharp things fun and enjoyable.

[@johnruiz6743]

Chinese pot metal and cheap as possible materials.

[@fabiogasperini5868]

Wrong. That's the same materials, made in the same factories that produce for reputable American brands, with the precision they are capable of. Blade may be D2 od 9Cr 18moV, which is not bad. What is bad is that the Made in USA is sooooo terribly expensive, overpriced is the right word.

[@richardhenry1969]

I really don’t understand why anyone would pay so much for a mediocre knife at best. I really haven’t had good experience with benchmade. They are not anything like KZbin people say . I’ve had bad grinds, one had grit in the action, then add the mark up because it’s USA made. I only keep my D2 grip because it was the worst knife I ever spent so much on. On a side note I’d use the fake then you won’t mess up your other ones. Because the fact is nothing you showed will make it preform different. The only thing is not knowing the steel an with any knife heat treatment is a crap shoot at best. Just take it has a lesson even the best get hustled.

[@jasonthames7360]

Sorry to hear you got scammed. Not cool. Fakes are the bane of our hobby, and I’m sure this is a crappy Chinese knock-off. If you think your getting a deal, your not, better to save up and get the real thing. Make sure you report the trader to protect others.

[@jamessmith5437]

U can carnivorise some of them if its a good knock off springs screws barrel spacers

[@2america826]

Yay sober docp is back 😆

[@Gator-357]

Don't buy Benchmade. Problem solved

[@Trolldaddy5]

Not really, there's fakes of everything.

[@fabiogasperini5868]

In fact, I buy the fakes. 1/10 of the price for the original.

[@GoodOlBoy1976]

@DocP91B please let me know if your mail I sent gets their.

[@DocP91B]

I got it today. Thanks! I'll show it tonight in the Live!

[@GoodOlBoy1976]

Hey Doc I was watching a video of storage locker buying and they got one loaded with WarHammer stuff. Check out @TreasureHuntingwithJebus the video about a hitman's storage locker.