Falken Wildpeak AT4s, I finally bit the bullet. Was it a good choice?

[@RiflemanLEONE]

2021 Tundra SR5 3” lift with 295 70/18s. Had to do a cab mount chop as I got rub at full reverse lock. Loving them so far. Drove through some really bad rain storms and they performed a lot better than my KO2s.

[@828findadventure]

Great news to hear. I just drove eight hours one way and they did great and aren’t that noisy.

[@boneskull4207]

Just got my 295 70/18 and I am in the same situation with having to do a cab mount chop. Did you have to do anything to the front bumper? I'm getting a little rub and already pushed the plastic forward so I may have to shim the front bumper or go aftermarket.

[@828findadventure]

@@boneskull4207 295s look great.

[@RiflemanLEONE]

@@boneskull4207Yeah, I had some slight rub on mine and had to take off front flaps. I have a CBI hidden winch bumper so it was already pushed out an inch or so. If anything, get a CMC and you can go to 35's later.

[@boneskull4207]

@RiflemanLEONE yeah, I took the flaps off before I got the tires in anticipation of that happening, as far as the cmc I believe you are right and go ahead and get it out of the way for future possibilities. Thanks for responding and have a blessed day!

[@hvega8199]

Nice ! It’s between the At4 or Baja boss for me.

[@teriyakidonuts]

Keep up the good work 828! I always enjoy your content!

[@jimyoung4356]

Nice choice! I look forward to hearing how they perform in different scenarios and long term. Good luck with them 👍🏼

[@828findadventure]

Thank you, eight hours of driving one way done. ✅ smooth, not to noisy at all and really depends on quality of pavement.

[@eriknash8783]

Your tires are rubbing due to your aftermarket wheel offset. Lifting the Tundra does not increase space for larger tires. I have TRD Pro, which is 2" lift from the Fox Suspension and I run 285/70-18 on stock wheels and no rubbing....

[@828findadventure]

Do you have mud flaps at all?

[@eriknash8783]

@@828findadventure yes, all flaps are installed including the small front spats. Those are very close, but still no rubbing

[@NebuChadNezzarKBDN]

This is correct. People need to stick to at least +25 offset. I run a +40 on my 21 tundra. It’s unreal how many people buy wheels that are so impractical for their vehicles. Bad for suspension geometry and overall wear and tear. I judge people on how much poke they have. 😊

[@christopherrice1375]

Good choice. They look great.

[@828findadventure]

Love these tires, and the more I look at them the more I like them. I never thought I would switch brands but these are great.

[@robertbutcher4201]

Very nice!! So glad you said heat gun, guys always hacking/trimming the plastic. Push it up and in with the heat gun. Running the AT3W's but a 275/55R20, not thrilled with the 20" rim that came with the truck but that's for another day.

[@Worthrhetime]

Look great. Thx for

[@TacoRancher]

How was the ride quality on those E load falcons? I’m thinking of getting the same exact ones for my Tacoma. Same size as well.

[@828findadventure]

@@TacoRancher ride quality is great and very quiet for an AT.

[@livinglife69]

I have the same truck and same size tires on order. What psi are you running in them?

[@828findadventure]

@@livinglife69 if they are E Load range tires like mine, I run 42PSI middle of the night cold.

[@MTMind69]

im just waiting for you to go all out and throw a moonlander on that tundra bed. you already have the ridgeline for everyday stuff haha!

[@828findadventure]

Interesting idea, my neighbors would love that.

[@MTMind69]

@@828findadventure you would def get more views too. That thing is rad and everyone wants one.

[@iancupaul4388]

Do these tires rub the swaybar without the 18mm offset? I have 285/75R18 Toyo Open Country AT II and I have some rubbing there with a 2" spacer lift. I got the Bilstein 5100 and I want to put them on the highest position, take the spacer off and put some 275/70R18 Wildpeaks. Is the 18mm offset necessary for that? Thanks you!

[@828findadventure]

My rub is only on the front right fender well at full lock in reverse. I run the 5100s on the top perch. I am not certain about factory wheels which are around +53 off set.

[@DaDizzyDino]

Hey, what are your wheel specs for offset? I just did bilsteins and looking for 33-34" tires now but trying to figure out rubbing clearance

[@828findadventure]

Wheels are Methods 18”x9” with a plus +18 offset. That gives .75” of poke past the fender. My OE style Bushwacker flares cover that to protect the paint. Thanks for watching.

[@DaDizzyDino]

@828findadventure thanks bud. Some of the description links weren't working. I added 20x9 +18 offsets to my 1794. Front wheel front mud flaps/air dams rubbed in reverse only. At full lock to the right I jave a little rubbing to investigate. Looking for solves before I go 33.5" tires

[@828findadventure]

@@DaDizzyDino I’ll try to fix those links. Thx

[@mjuberian]

are the quiet on the road?

[@828findadventure]

Here’s my review on that, thanks for watching. kzbin.info/www/bejne/m6CxfHevfJudqs0si=jxYq_MtTQf8xQv1U