Ram & Magnum Walk into a Bar & Buy $800 Snowplow

[@larryjones1774]

Merry Christmas and happy new year 🎉

[@michaelolenick4078]

Merry Christmas To you and your family.

[@dannydunnagan3267]

Merry Christmas to you and the family.

[@FarmerMD]

Thx - same to you!

[@frankscruggs4749]

Good video.

[@kimgould1368]

the other one was the bad box donnie! lol

[@benny8300]

Merry Christmas to you!!!

[@FarmerMD]

Thx - back atcha!

[@mikekahl4745]

It works now.

[@eddiereichel9354]

I live in NWPA and couple weeks back teuck load of machine chips got sprrad all over rote 8. So many fkat tires. Pennsot has done nothing the chips are still all over the road.

[@meadowviewlawncarellc8079]

I got the exact same truck and same Meyer plow. Plow came with the truck new, have you ever had the truck pop up battery saver mode? If you do the double tap on the controller to angle or lift it auto runs the pump to long and draws too much power. It’s done it since new.

[@FarmerMD]

I have never had the battery saver mode issue. The headlight is the 1st issue I've had with the plow setup since new. But we haven't used the plow much in the last 2 years. Hopefully that changes this year.

[@meadowviewlawncarellc8079]

@ just had 2 salt runs so far up here in southern ct so far and just about a inch on Monday. My other 2 rams with westerns never have a problem Meyer just seems to draw more amps. But it doesn’t affect the truck other than the message 🤷‍♂️. Oh check your tire seal directions some of them aren’t friendly with the tpms sensors.

[@marckimbrell4645]

Will the liquid tube damage the TPMS sensor?

[@FarmerMD]

now that's a great question - something I have not thought of

[@tractorsfamilyandwildlife1342]

Get some soap water in a spray bottle to find your air leak all I use works great for finding them slow leaks

[@FarmerMD]

I may try that before putting the liquid tube in

[@tractorsfamilyandwildlife1342]

@ add a few extra pounds of air helps open up them hard to find slow leaks

[@waynebradish6344]

Always test those mini fuses. You cannot always see the small fissures in the wire from looking. Not testing. Cost me $200 tow one time. I will never look at one of those fuses to see if it's bad again. Always use a meter.

[@FarmerMD]

And that's why I changed the fuses to different positions to verify.

[@mowerjeff8990]

Sure hope your paying for all the stuff you take from your local hardware store.

[@FarmerMD]

I sure do! We strive for 98% inventory accuracy so I need to run all of my supplies thru the register. But I do get the favorite customer discount on most items...