How to Install RAM Clutches' Dual Disc on your Muscle Car.

[@calebstrawn]

I watched this video before installing my single disc clutch and thought, "the plastic tool will probably work for me since I don't have a twin disc..." WRONG. I gave up after 3 failed attempts, knowing exactly what the problem was, thanks to this video... Needless to say, the steel alignment tool will be here tomorrow and I will finally get my transmission installed. Don't be like me, order the steel alignment tool ahead of time!

[@FastMonty]

That struggle is real! Those cheap ass plastic tools are useless... good call on going with the steel version. Keep us posted of the "night and day" difference. Thanks for the comment!

[@paulcaruthers9647]

Great install, can't wait to order my tkx from Silversport.

[@FastMonty]

Thanks Paul! You're gonna love it!

[@fasnuf]

I installed my clutch tonight and would swear by the metal alignment tool. It is so much more precision than the plastic. Took a couple tries to align the trans, but it sucked right up. That slave cylinder spring makes no resistance when assembling. Tomorrow I finish the job.

[@FastMonty]

Yeah, totally agree. The steel tool should be mandatory, shouldn't it? Great to hear you got the clutch in... you're gonna love it!

[@jagco2594]

How thick is the flywheel please if you have this info.

[@FastMonty]

I don't know off the top of my head, but pretty sure I measured it in the video?

[@ChrisLincolnHomes]

Nice video. Great instruction. Thanks for taking the brunt for the rest of us that will eventually be doing that.

[@FastMonty]

Thanks Chris! Exactly why I do this... to help others. Thanks for the comment.

[@canpromechanical3283]

what torx socket does that pressure plate use does it come with the torx socket

[@FastMonty]

Good question. It's not a TORX head. It's actually a 12 point head, which a standard 12 point socket will fit on. I think it's a 3/8"? I don't remember.

[@or-ian6973]

I’m going through this exact same thing right now with my tkx and dual disc. Have a billet alignment tool coming now.

[@FastMonty]

Nice! Day and Night difference when you get that billet tool. Never been happier when I got the TKX to seat, after using the billet alignment tool. Congrats on your upgrade, and thanks for the comment!

[@firebird70]

wicked action there Mike

[@FastMonty]

Thanks Brother! Fun times, as usual... ha, ha...

[@Danno74Z]

Hi Monty, I have been looking at this install of the TKX and I have a question/observation. Looking at your calculation sheet I'm wondering if the TKX input shaft is making enough contact with the pilot bearing? Here goes. The TKX input shaft length is 7.21". This dimension is from Tremec. The bell housing width you are using is 6.325". You said you used a .250" spacer to get the HTB clearance. This makes the the overall dimension of the bell housing 6.575". The remaining stick out of the input shaft then is .635" measured on the front plane of the bell house. The protrusion of the crankshaft is .70" but the pilot bearing is seated at least that deep back into the crankshaft negating the .70". Are you sure the nose of the input shaft is at least 1/2 inside the pilot bearing? What am I not seeing?

[@FastMonty]

Good job on the analysis. The difference is the bearing is flush to the crank, it is not pushed all the way back into the recess. So, the shaft still contacts the inner race of the bearing. Yea, I triple checked that one. Ha, ha... thanks for the comment!

[@Danno74Z]

@@FastMonty Got it. I did not know the pilot bearing could be left unseated. I always thought they had to be driven in all the way :). If you were to guess would you say the pilot bearing is in 2/3rd of its length? I might be running into the same issue. For the Chevy, I might use Allstar-ALL26114 Long Pilot Bushing with Roller Bearing. How did the car show go and auto cross? Again thanks.

[@FastMonty]

@@Danno74Z It' mounted flush, so it's fully engaged. But, you could keep pounding on it to install even deeper. Obviously not recommended. All is good! Thanks for watching!

[@dougcarter4837]

I had the same issue with the alignment tool. I think Ram should not send that plastic junk. I puller my TKX out 5 times messing with that thing. Like you said it was a total waste of time.

[@FastMonty]

Thanks for sharing Doug... totally agree. I was using words I typically only use on the golf course... ha, ha... thanks again!

[@andrer3854]

Keep them coming! I have a question not related and that is "When you were doing your rust repair, did you have order replacement metal. I need a left inner fender and looking for a source with good fit.

[@FastMonty]

Thanks Brother... so, the best patch panel is from an original fender, as replacement pieces just aren't the same gauge as original. If you can't find original steel, I got most of my panels from @Original Parts Group Good luck!

[@andrer3854]

Ok Thanks a bunch

[@genoleblanc5008]

Love the channel can you please tell which company your flywheel bolts came from And the size That you used on ram Flywheel Thanks so much

[@FastMonty]

Thanks Geno, I used these; butlerperformance.com/i-31643971-arp-pontiac-flywheel-bolts-1-2-x-875-set-arp-290-2802.html?ref=search:https%3A%2F%2Fbutlerperformance.com%2Fsearch.html%3Fq%3Dflywheel%2Bbolts Have Fun!

[@genoleblanc5008]

Thanks I do appreciate it

[@FastMonty]

@@genoleblanc5008 No problem! BTW, there are basically two different bolts you can use, I used the shorter of the two options. Have fun!

[@genoleblanc5008]

Hello I'm gonna bug you again OK I got the SST heavy cast stock looking pontiac bellhousing I'm using ram's manual throw out Bearing No hydraulics. your measurements To see if everything is gonna fit in the bell housing do you think using a manual throw out bearing Using stock clutch fork it's not as tall as a hydraulic bearing is. it's gonna fit without using that spacer you had to use Because I'm worried about the transmission shaft will not seat correctly in the pilot bearing I'm asking this cause I don't want to order everything and then realize I have to use that Spacer cause I don't want to. I like your channel cause you do everything yourself And you show it . Thanks for your awesome advice again I do appreciate it

[@FastMonty]

@@genoleblanc5008 It "should" fit fine. But, that's why you should measure it. :) Not all clutches are created equal, so that's the big variable. Still plenty of pilot shaft engagement with the spacer plate, and no changes down stream from that point. Have fun!

[@RestorationObsession]

Awesome info!

[@FastMonty]

Thanks, hope it helps!

[@joed.i.tryin.5816]

hey Mike, thanks for the great videos. Super helpful and very comprehensive. How do you like the dual disc after almost a year? Im trying to decide between single vs dual, Ram vs CF vs others…

[@FastMonty]

Hey Joe, I freakin LOVE IT! I've been drag racing, and autocrossing... and "spirited driving" of course. :) ZERO Change in performance. I highly recommend it. Have fun, and let me know if you have any questions!

[@MEC1955]

how's the pedal pressure?

[@FastMonty]

Honestly, feels about the same. I thought it would be lighter... can't tell.

[@MEC1955]

@@FastMonty did you by chance have a centerforce..because they have nice easy pedal pressure

[@FastMonty]

@@MEC1955 Yup, it was a Centerforce, and good to know!

[@darinandalinahouse9596]

If I ever do this I’m hiring it done. I don’t do math. 😂

[@FastMonty]

Ha! Nothing wrong with that... lots of measuring going on.

[@billmiller5075]

Mike with the flywheel being lighter will it rev quicker. Nice install

[@FastMonty]

In theory, yes. But, I should've compared the weights to my old pressure plate/clutch disc, to the new pressure plate, and floater. They maybe be offsetting? Thanks Bill!

[@billmiller5075]

@@FastMonty your right Mike one cancels the other out

[@doomman700]

I put 1050 pounds of torque through a zoom zvt single disc

[@FastMonty]

Nice! I wish I had 1000 ft lbs of torque to deal with. Thanks!

[@griffmillerii1885]

Mike, with the spacer plate (which if I understand correctly is new to the setup), does that move your transmission away from the engine by the plate's thickness? Did that have any effect on your driveshaft length and trans mount? You didn't mention it, so I guess you had enough wiggle room (or I just don't understand).

[@FastMonty]

Good question Griff... yes, it moved the transmission backward, and yes, I had wiggle room. :) That was one of my concerns, but luckily it worked out! Thanks again.

[@Rick-O-Shay60]

SO CLOSE!!! AAHHHHH!!!!

[@FastMonty]

Ha, ha... yup, almost there!

[@FastMonty]

Be sure to subscribe for more, click here; kzbin.info Then get your FMG hat here; three color combos www.etsy.com/shop/fastmontysgarage

[@johnmilner7603]

I never use the junk plastic clutch installation tool cause they are too sloppy. For my Muncie I use an old 4th gear (input shaft). I also use the same input shaft with a 1/4” plate to hammer in my crank bushing after it comes out of the freezer.

[@FastMonty]

Now you tell me! Ha, ha... nice trick John. Thanks for the comment.