Fault 4 Cooker, Oven trips Electricity Rcd or fuse on the main fuse board when you turn the oven on

The Cooker or Oven trips Electricity Rcd or fuse on the main fuse board when you turn the oven on, in this video, www.how-to-repair.com/help/ov... we will look at
1 Element's tripping electric supply RCD on fuse board
2 Bad connections on the terminal block
3 Damaged selector switch
4 Other components on cookers and ovens, that can trip the electricity. motors, thermostats, cut-out switches lamp assemblies
▶More Cooker and Oven videos
kzbin.info...
🛒 Cooker fan oven elements
www.how-to-repair.com/help/se...
🛒 Cooker and oven grill elements
www.how-to-repair.com/help/se...
🛒 Cooker and oven Base elements
www.how-to-repair.com/help/se...
Please remember to subscribe to our channel and click on the bell notification to get reminders
kzbin.info?...
Remember to Shop with www.how-to-repair.com and it would help us by posting the video or the website on your
timeline. This helps us a lot and if we really helped you can always buy us a beer how-to-repair.com/help/buy-pau...
Please remember to mark us to your favourites also I would be grateful if you would subscribe to our channels
social media as this really helps my site and keeps us going.
KZbin. / apart4u
Facebook. / how.to.repair.appliances
0:00 - INTRO
0:40 - FINDING YOUR OVEN MODEL NUMBER
1:40 - REASONS WHY A COOKER OR OVEN TRIPS THE RCD OR CIRCUIT BREAKER
2:04 - WHY OVEN TRIPS ELECTRIC AFTER A PERIOD OF TIME
2:48 - HOW COOKER & OVEN ELEMENTS ARE MADE AND WORK
3:40 - WHAT GOES WRONG WITH COOKER & OVEN ELEMENTS
5:13 - WHAT CAUSES AN ELECTRIC OVEN TO TRIP, ELEMENTS, MOTORS, TERMINAL BLOCK, BULB LAMP HOLDERS, PCB, SELECTOR SWITCHES, THERMOSTATS.
#TrippingElectric #TripsCircuitBreaker

[@GB-ys3mw]

All the way from Canader!! Thanks for the video - you solved my breaker-tripping range issue and it only cost me $3.75 CDN! One of the two bulbs in the oven was BADLY deteriorated causing a short and the breaker to trip. Could'nt believe it - thought at the very least 100 bucks for an element! Thanks brother - just subscribed to your channel.

[@How-to-repair]

Excellent! glad i was able to help

[@emanuelblei7699]

This video was very helpful. I took the oven apart, checked each element separately and found that the bottom element had completely crumpled.

[@Justyburger]

A very informative video. Here in New Zealand, we don't put ovens or hobs on RCD's. They are usually on an MCB. The lights and power points are all on RCD's. The rules are 3 circuits per RCD. Alternatively we just use RCBO's.

[@superduperchannel8114]

Thank you sir you r awsome my oven was not working and i saw your video and it show i have to see circuite board and its done my oven working

[@martin54123]

Very informative, thank you.

[@DB25k]

You are legend... This video is very very good. Brilliant explanation of possible fault of that electric cooker.

[@How-to-repair]

Glad it helped @darkbyte1271 please remember to subscribe to our channel as that really helps us kzbin.infoe432SAb2g08 Thanks, Paul 👍

[@fattoamanowoodwork3638]

Brilliant expalanation, thank you good man

[@stevewelch4784]

This was awesome, I was so close to buying a new oven... turns out my lightbulb had gone and was tripping the circuit breaker! New lightbulb: £5 :D

[@How-to-repair]

Glad you got it so cheap glad we could help you @stevewelch4784 this is for you kzbin.infoe432SAb2g08 please remember to subscribe as that's what keeps this channel going. Thanks 👍

[@samueldowson2138]

Very informative video thanks ! Do you know what the likely cause would be of the rcd tripping but only once the oven is turned off? Its intermittent and random but only after switched off for 5-10 mins

[@osmanmansoor4386]

Great explanation..

[@jwoodard621]

Hi there we had a hob selector switch melted do we replace thankyou for your video 😀

[@markjohnstone1618]

Fantastic content. Thankyou

[@How-to-repair]

Glad you enjoyed it!

[@johndean6333]

Love it,Beautifully explained as a result you have got a sub from me pal.🙂

[@How-to-repair]

Thanks for the sub!

[@user-jt1jv8vl9r]

I have a Bosch oven. Simply opening the door is sufficient to trip the switch on the breaker. The oven doesn't even need to be on, nor been on prior to opening the door. My guess is that the door sensors need replacing but it's just a guess. However, it is intermittent and doesn't occur everytime the door is opened.

[@maryoneill5449]

Have the same problem and its a BOSCH HBS573BSOB. Is that your one?

[@stephenfoster3953]

Thank you for an excellent video, as always. Any chance of making a similar one for dishwashers? (An old Bosch in my case)

[@How-to-repair]

i have 100s to make lol but will look at d/w shortly Thank you for leaving a comment, I would love you to leave your opinion on our poll about manufactures building in obsolescence to appliances. kzbin.infoUgkxygHomnUySd_bYjaJBdEHPO6T4dYo9Ahm and this is for you kzbin.infoe432SAb2g08 please remember to subscribe as that's is what keeps this channel going. Thanks 👍

[@7N_GA]

He bro, I have air fryer/oven and when it gets hot the vents of the fan inside expand and it lifts up causing it to stop the fan...so is it safe to connect the vents to the heating element with a copper wire in order to stop it from hitting the fan?

[@bossadave]

Very informative

[@How-to-repair]

Glad it was helpful! Thank you for leaving a comment this is for you kzbin.infoe432SAb2g08 please remember to subscribe as that's is what keeps this channel going. Thanks 👍

[@richardtaylor7754]

Range master oven trips the rcd when Turing off main oven socket, any idea

[@Sorcli]

Great video. Just moved into a house with an AEG cooker that has never been used, still had the labels hanging from it. It turns on but as soon as you turn the temperature dial the RCD trips. Tried using only the top element or bottom element but it always trips. Could you give me an idea what might be causing this?

[@mperformancepack4792]

I have the Same issue, did you get to bottom of this ?

[@solman2003]

Hi there I need help with my bush AE6BFB GRILL OVEN . it’s doesn’t give heating while the fan is working fine so I though it’s the elements I’ve replaced with a new one but unfortunately it’s still not heating at all so I’m just wondering what could be the problem just to let you know that my grill temperature light and grill setting up light in the front none of them are not working too so can you suggest me what could be the possible reason of not heating plz plz helps with your valuable suggestions

[@themovingdance2744]

Very good

[@How-to-repair]

@themovingdance2744 this is for you kzbin.infoe432SAb2g08 please remember to subscribe as that's what keeps this channel going. Thanks 👍

[@mikidut1]

What would be the problem in this matter , when I am trying to switch the button of cooking options to a neff oven the mind fuss goes off

[@raven488]

Hi , hope you can help .. we have a zanucci double oven cooker it started tripping our main fuse box .. we replaced the main oven control knob , thermostat , plus the fan motor in main oven all the other parts work with out tripping just main fan oven .

[@How-to-repair]

You really need to test each individual component with an insulation tester or mega, but this is an expensive tool and I do not expect you to only one, but you may have an electrical friend who would be able to assist. The only other way is to individually test components with the Earth attached to them correctly

[@christhackrsy]

Are you back in uk don’t look like Portuguese plugs ?

[@ntombimngomezulu5558]

Hi my oven was working very well then I decided to clean the oven using soup and small water now is trapping pls help,,, thank you

[@xx.1.]

Did you find out? I did the same now trips

[@zxc1423m]

My oven trip when reaching maximum temperature.what is the solution and how to fix it

[@JezmondoMisterfull]

Hi IKEA oven F908 error code. Can't find anything about this error code online. There is no continuity at the element, could it be that? Have changed elements in a Hotpoint oven before. This IKEA oven is proving tricky to find out about.....any help greatly recieved. Thanks

[@tinabraxton4906]

Is the RCD the switch on the wall? The one where my oven is connected has two switches, one of them red. Also, my oven is 30 years old and has not worked for as long as I've lived here. If I turn it on, it immediately trips the breaker. My landlord wants to put a new fuse in it, but he is not an electrician. Should I just forget about getting this thing fixed?

[@How-to-repair]

it will be only a faulty element causing this Thank you for leaving a comment this is for you kzbin.infoe432SAb2g08 please remember to subscribe as that's is what keeps this channel going. Thanks 👍

[@darrenkarp170]

My Neff single built-in oven has just started to trip our RCD on starting. Both the top and fan elements look okay visually and I can spin the fan blade with my hand without any problem. What should I check for first without totally removing the oven (if possible)? Thank you.

[@How-to-repair]

The easiest way to test this without a multimeter or a insulation tester. First disconnect the power from the electricity then isolate one element at a time. Then turn the power back on making sure that the wires were safe not touching any metal and try each individual element. This should only be really done with someone who is competent with electrics. This way you will be able to find which element is specifically causing the rcd leakage problem. If you need any further assistance please contact us through the website and send your telephone number I will be glad to assist in the morning

[@NatangweNangolo-vj8th]

My microwave neutral and ground wires are testing hot, meanwhile, live wires tests cold. And it's blowing the main fuse.

[@stephenvjoseph]

I had a cooker, which blows the fuse in the plug as soon as it plugged in. I did meg test on the oven, it came with 550Mohm. Couldn't understand what was wrong?

[@How-to-repair]

if it blows the fuse this is normally a direct short. Thank you For leaving a comment this is for you kzbin.infoe432SAb2g08 please remember to subscribe as that's is what keeps this channel going. Thanks 👍

[@TheDappler]

My Gas Oven is Blowing the Plug Fuse that does the ignition, clock, timer, and Oven light. Could this be a socket or Oven Problem. Thanks for any help Bob

[@How-to-repair]

Hi @TheDappler I will need the full model number of the identification plate and the details of your problem. Please use our contact us page and make sure you fill out the request for what your problem is. We will get back to you within 24 hours, normally. www.how-to-repair.com/help/contact-us/ Please remember to subscribe to our channel, as that's what keeps this channel going. Thanks 👍

[@wajihaislam7069]

Hlo mr I have problem when I am on electrical cooker stove that time I face electricity problem our refrigerator and oven and cookers connection one lane so what can the problem .is cooker problem . Should I buy a cooker or can it electric line problem plz answer😢

[@shalihanjaffer2179]

I need help, my super genaral 4 burner gas stove when gas ignition on electric switch tripping. How solve.please.telme.

[@How-to-repair]

If it is tripping the electric supply, then you may have electricity tracking to the chassis. This could be from a spillage or you may have a wire trapped. You can always try disconnecting a component and making sure the wires are safe and try it again, but all work should be done by a qualified gas engineer, depending on where you are in the world. @shalihanjaffer2179 please remember to subscribe to our channel as that really helps us kzbin.infoe432SAb2g08 Thanks, Paul 👍

[@kathrynloveland9794]

My microwave oven works fine but I have cockroaches in the interior. Roaches can't be killed by microwaves. Usual methods of pest control aren't working. Help! Anyone have suggestions?'

[@How-to-repair]

I seriously do not know the answer with this I suggest you get someone in to do pest control

[@sonyamoz9347]

Cloudy ammonia 8% will move them out of ur house forever.. Don't forget mask and glasses when you spray..

[@raven488]

I’m confused my main oven started to trip after years it’s an zanucci double oven .. so we changed the main oven controll knob , the thermostat , plus the fan oven motor it was working great then started doing it again .. we are at a loss ?? Please help!

[@conwaylai8562]

Intro music so loud, but your voice during explanation so quiet... Please normalise your audio.

[@johnyperu]

too much waffle